Owner manual

MAX6010
Precision, Micropower, 3V Series
Voltage Reference in SOT23
_______________________________________________________________________________________ 5
Detailed Description
The MAX6010 is a precision, low-noise, low-dropout,
micropower, bandgap voltage reference in a SOT23
package. This three-terminal reference operates with
an input voltage from 3.2V to 5.5V, and outputs 3V. The
device sources up to 7mA with < 200mV of dropout
voltage and requires only 5µA (max) supply current.
Applications Information
Output/Load Capacitance
The MAX6010 requires a minimum of 1nF load to main-
tain output stability.
The device remains stable for capacitive loads as high
as 1µF. In applications where the load or the supply
can experience step changes, a larger output capaci-
tor reduces the amount of overshoot (or undershoot)
and assists the circuit’s transient response.
Supply Current
The 5µA maximum supply current varies only 0.05µA/V
with the supply voltage.
When the supply voltage is below the minimum-speci-
fied input voltage (as during turn-on), the device can
draw up to 20µA beyond the nominal supply current.
The input voltage source must be capable of providing
this current to ensure reliable turn-on.
Turn-On Time
The MAX6010 typically turns on and settles to within
0.1% of the final value in 700µs. The turn-on time can
increase with the device operating at the minimum
dropout voltage and the maximum load.
PIN NAME FUNCTION
1 IN Supply Voltage Input
2 OUT
Reference Voltage Output. Bypass with at
least 1nF to ground. (See the Output/Load
Capacitance section.)
3 GND Ground
Pin Description
LOAD-TRANSIENT RESPONSE
MAX6010 toc13
400
µ
s/div
V
OUT
1V/div
-1mA
V
IN
2V/div
7mA
LINE-TRANSIENT RESPONSE
MAX6010 toc14
400
µ
s/div
V
OUT
10mV/div
V
IN
200mV/div
4.8V
Typical Operating Characteristics (continued)
(V
IN
= 5V, C
IN
= 0.1µF, C
OUT
= 0.1µF. T
A
= +25°C, unless otherwise noted.)