Instruction Manual

W90P710CD/W90P710CDG
Publication Release Date: September 19, 2006
- 387 - Revision B2
AIC End of Service Command Register (AIC_EOSCR)
REGISTER ADDRESS R/W DESCRIPTION RESET VALUE
AIC_EOSCR
0xFFF8_2130
W
End of Service Command Register Undefined
31 30 29 28 27 26 25 24
--- --- --- --- --- --- --- ---
23 22 21 20 19 18 17 16
--- --- --- --- --- --- --- ---
15 14 13 12 11 10 9 8
--- --- --- --- --- --- --- ---
7 6 5 4 3 2 1 0
--- --- --- --- --- --- --- ---
BITS DESCRIPTIONS
[31:0]
EOSCR
This register is used by the interrupt service routine to indicate that it is
completely served. Thus, the interrupt handler can write any value to
this register to indicate the end of its interrupt service.
AIC ICE/Debug Register (AIC_TEST)
REGISTER ADDRESS R/W DESCRIPTION RESET VALUE
AIC_TEST
0xFFF8_2200
W
ICE/Debug mode Register
Undefined
31 30 29 28 27 26 25 24
RESERVED
23 22 21 20 19 18 17 16
RESERVED
15 14 13 12 11 10 9 8
RESERVED
7 6 5 4 3 2 1 0
RESERVED TEST