Instruction Manual

W90P710CD/W90P710CDG
- 464 -
BITS DESCRIPTIONS
[31:16]
RESERVED -
[15:0]
TOD1
16 bit Time Out Data count Register 1
The value showing in register TOD 1 is the number of ETU to
count. The time-out data counters may only be used when a card
is active with a running clock. This is 16 bit time-out data register
used to show the current counting value.
Smart Card Host Time-Out Data Register 2 (SCHI_TODR2)
REGISTER ADDRESS R/W DESCRIPTION RESET VALUE
SCHI_TOD2_0 0xFFF8_5040
R
24 bit Time out Data Register 0 0x0000_00FF
SCHI_TOD2_1 0xFFF8_5840
R
24 bit Time out Data Register 1 0x0000_00FF
BITS DESCRIPTIONS
[31:24]
RESERVED -
[23:0]
TOR2
24 bit Time Out Data count Register 2
The value to load in register TOD 2 is the number of ETU to count.
The time-out counters may only be used when a card is active with
a running clock. This is 24 bit time-out data register used to show
the current counting value.
31 30 29 28 27 26 25 24
RESERVED
23 22 21 20 19 18 17 16
TOD2[23:16]
15 14 13 12 11 10 9 8
TOD2[15:8]
7 6 5 4 3 2 1 0
TDO2[7:0]