Instruction Manual

W90P710CD/W90P710CDG
Publication Release Date: September 19, 2006
- 499 - Revision B2
BITS DESCRIPTIONS
[31:16]
Reserved
-
[15:0]
CNRx
CNR: PWM counter/timer buffer. Inserted data range: 65535~0. Unit:
1 PWM clock cycle
Note 1: One PWM counter countdown interval = CNR + 1.If CNR is
loaded as
zero, PWM counter will be stopped.
Note 2: Programmer can feel free to write data to CNR at any time,
and it will be reloaded when PWM counter reaches zero.
PWM Comparator Register 0/1/2/3 (PWM_CMR0/1/2/3)
REGISTER ADDRESS R/W DESCRIPTION RESET VALUE
PWM_CMR0
0xFFF8_7010 R/W PWM Comparator Register 0 0x0000_0000
PWM_CMR1
0xFFF8_701C R/W PWM Comparator Register 1 0x0000_0000
PWM_CMR2
0xFFF8_7028 R/W PWM Comparator Register 2 0x0000_0000
PWM_CMR3
0xFFF8_7034 R/W PWM Comparator Register 3 0x0000_0000
31 30 29 28 27 26 25 24
Reserved
23 22 21 20 19 18 17 16
Reserved
15 14 13 12 11 10 9 8
CMRx[15:8]
7 6 5 4 3 2 1 0
CMRx[7:0]
BITS DESCRIPTIONS
[31:16]
Reserved -
[15:0]
CMRx
CMR: PWM comparator register
Inserted data range: 65535~0. CMR is used to determine PWM output
duty ratio.
Note 1: PWM duty = CMR + 1.If CMR is loaded as zero, PWM duty =
1
Note 2: Programmer can feel free to write data to CMR at any time,
and it will be reloaded when PWM counter reaches zero.