Installation Guide

3 Holes Bathroom Sink Faucet
Note: The product model in the manual may be different from the actual, but the installation process is the same.
Tools You May Need:
The installation process of the faucet is simple, but the narrow installation space
may cause you to be injured, please pay attention to your safety!
Adjustable Wrench
Screwdrive Safety Goggles
Gloves
Preparation before installation:
A. Check the diagram and parts list to make sure all parts are not
missing.
B. Close the water supply valve, then turn on the old faucet to
release the residual water.
C.Remove the existing faucet then clean the sink and countertop.
D.Pre-drilling size requirements: 1-3/8"(min)-1-1/2"(max)
Note:
Maximum Countertop Thickness Without Deck: 1-1/2" (1 hole mount)
Maximum Countertop Thickness with Deck: 1" (1, 2 or 3 hole mounting)
Diagram and Parts List
A: Faucet Body
B: Rubber Washer&Metal Gasket
C: Metal Mounts&Screws
D: Rubber Washer&Metal Gasket&Fixing Nut
E: Three-way waterline
A
D
B
B
C
C
E