Instruction WIFI Indoor Water Pump Timer Model: TTP106W Customer Support WEB: www.rainpointus.com Please contact us at the above Email:service@rainpointus.com for support with any questions Free Hotline (US): 1 833 3815659 about use.
WELCOME TO RAINPOINT The IK10PW is a WiFi automatic watering pump kit, like any other Wi-Fi device: if you have access to the Internet, you can connect to your pump from anywhere, perfect for business trips, travel or any busy person; also works well in indoor, balcony, office, and so on scenarios where there are no water faucets. As the device requires wifi pairing and simple assembly before first use, it may be challenging.
TABLE OF CONTENTS PRODUCT OVERVIEW 1-3 1. Product Appearance 01 2. Package Includes 02 3. Specification 03 EASY TO INSTALL 4-8 1. 2 Ways to apply power for activating the pump 04 2. Determine the correct placement 06 3. Connect the hose correctly 07 4. Installation completed and tested 08 SIMPLE TO PAIRE WIFI 9-11 1. Initial RainPoint App Setup 09 2. Pair the water pump 09 APP INTERFACE OVERVIEW 12-15 1. Home Interface 12 2. Irrigation Schedule Settings 12 3.
MANUAL WATERING MODE 17 REST THE DEVICE 17 TROUBLESHOOTING 18 WARRANTY 20 CUSTOMER SUPPORT 20
PRODUCT OVERVIEW 1. Product Appearance 5 3 1 No.
2. Package Includes Accessories Included Name PCS USB Cable 1 *Pair WiFi or power supply Tubing 1 LEN: 10m/32.8Ft Inner diameter of pipe:0.
3. Specification Working Pressure 0.
EASY TO INSTALL 1. 2 Ways to apply power for activating the pump 1.1 Insert 4*AA 1.5V alkaline batteries 1) Remove the battery tray back of the pump. 2) Inset 4 brand new AA (1.5V) alkaline batteries (not included) as the marked "-", "+" direction. 3) Firmly reinstall the battery cover back into the pupm. 4) Once the battery is powered on, the indicator will light up when you press button. Note: · Firmly restore the battery cover to ensure water resistance.
EASY TO INSTALL 1. 2 Ways to apply power for activating the pump 1.2 Plug in the cable of the UBS port 1) Plug in the USB cable (included) 2) When the power is on, the indicator will light up. Note: · High current support is required for pairing WiFi and accessing APP, so it is only available in USB cable-powered mode. · WiFi pairing and APP access are not available in battery-powered mode only. · Only manual watering is supported in battery-powered mode.
2. Determine the correct placemen 2.1 Please put the pump below the water level of the reservoir to effectively avoid the siphoning phenomenon.（The siphoning effect will cause the water leaking and over-watering problem） 2.2 The lift length of the water pump: the vertical distance of 2-3m, because the water pipe can not be placed 100% straight, we recommend that the height of the plants than the pump should not exceed 2.5m. 2.5m 2.
3. Connect the hose correctly 3.1 Cut the hose according to the distance of the device, the plant or you need veggie oil 3.2 Put the head of hose into hot water for 10s or Put a little veggie oil on the end of the hose before connecting 3.3 Connect the hose to water inlet and outlet Inlet Outlet 3.4 Insert the other end of the hose connected to the water nlet of the pump into the filter, and then put it into the container. 3.
3.6 When water needs to be delivered to the soil, you need to use the micro drip emitte Tips: Loosen the soil first, then insert the drips at least 3 inches deep, which will help water enter the plant roots. 3.7 Connect a tubing end cap when you finished a branch installation 4. Installation completed and tested 4.1 Press the button to activate the pump, then the water will pumped to your plants. 4.2 Check if there is any leakage in the connection part of the hose.
SIMPLE TO PAIR WIFI 1. Initial RainPoint App Setup Rainpoint 1.1 Search for "RainPoint"and download Android version or iOS version App for free. Or scan the QR code to download Rainpoint APP. 1.2 Create an account and login Create an account or login with an existing account to begin pairing with Wi-Fi water pump. 2. Pair the water pump 2.1 Click the button the APP. or on the home page of 2.
2.3 Select 2.4GHz Wi-Fi Network and enter password. Then click "Next". Note : RainPoint Wi-Fi water pump only pairing with a 2.4GHz WiFi, for a dual-band router, please independently enable 2.4GHz WiFi band and name it differently from 5GHz WiFi band. Please click and follow the "Common Router Setup Methods" to separate them. 2.4 Powered the pump with USB cable and follow the instructions on the APP to reset first. Then click " " to confirm indicator rapidly blink and click "Next" to enter the pair mode.
2.5 Wi-Fi pairing requires about 1-2 mins, once the device is paired successfully, the APP will show "Device added successfully". Note : • You can customize the name of the device as required. • If you have not been able to pair for over 2 mins, please go to page 9 and follow the instructions to fully reset the device and start pairing again from the beginning. FCC Notice: FCC ID: 2AWDBTTP106W This device generates radio frequency energy and may cause interference to radio and television reception.
APP INTERFACE OVERVIEWI 1. Home Interface Weather Forecast Get the weather data for the town you selected to realize intelligent watering. Add Device Allows to add multiple RainPoint smart devices. Created Home Customize home names of the different irrigation areas by entering ''My Home" . Added device(s) Click on your selected device to next step andstart your irrigation schedule settings. 2.
3. Device Information Virtual ID For Device Offline Notification Open:send a message to APP when device is offline. FAQ & Feedback Asking support and feedback questions. Remove Device Remove the device before resetting it, refer to Page to view.
4. Smart Function Interface Automation Function Customize multi-irrigation plans with local weather, temps, humidity, sunrise/ sunset or weeks. Add Watering Plan Click to set the conditions and tasks for your plan. Tap-to-Run Function Means you can set and control multiple devices and plans with one tap. Notice: 1. "Automation" and "Tap-to-Run" are different on function and setting. "Automation" is mainly for the new smart plan setup, while "Tap-to-Run" is mainly for easy control on the smart plans. 2.
4.1 Condition Settings Setup arguments and add conditions as your required. 4.2 Task Settings Set up tasks as your required, then trigger task if conditions are met.
5. Personal Date Interface Setup arguments and add conditions as your required. Add or remove Home Manger/Home(group) as your need. AUTOMATIC WATERING MODE Step1: Click to setup watering frequency as your required and "done" it. Step2: Click to setup watering duration as your required and "done" it. Step3: Click and change it to .Means that your schedule is running. Note: Please remember to action step 3 after the setup is completed, otherwise the program won't run.
MANUAL WATERING MODE 1. Manual Operation Via App Click the switch to turn ON / OFF manual watering, manual water run time you choose will be the duration your cycle will run for. Note: If you want to change the manual irrigation time, please adjust the "How Long" option, and your original watering time also will be overwritten. 2. Manual Operation Via Device Click the button to turn ON / OFF manual watering, manual water run time you choose will be the duration your cycle will run for. RESET THE DEVICE 1.
TROUBLESHOOTING Problem Possible Cause Possible Solution WiFi can’t be connected Not in 2.4GHz wifi channel connection Reset the router for a 2.4G channel and reconnect. Too far between the pump and router, causing the signal unstable Move the pump to a closer socket near the router and reconnect. Not in the correct connecting mode Unplug the USB cable and battery first and wait 10 Sec.
Problem Possible Cause Possible Solution Hard to insert and remove water pipes Because of the material, in order to make the pipe more durable. Put the head of hose into hot water for 10s or Put a little veggie oil on the end of the hose before connecting. Watering schedule not on time The lack of water at the inlet resulted in the plan not being implemented on time.
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
WARRANTY Rainpoint provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. CUSTOMER SUPPORT If you find it difficult to set up and want to watch the setting tutorial video, please subscribe to our channel: RainPoint on YouTube. Please scan the QR code to visit the RainPoint channel on YouTube quickly. If the app and the user manual don’t have what you’re looking for, and you need some help, please prepare the Model NO. and LOT NO.
