User Instructions

- 19 -
Problem Possible Cause Possible Solution
Hard to inse
and remove
water pipes
Watering
schedule not on
time
Because of the material, in
order to make the pipe more
durable.
The lack of water at the inlet
resulted in the plan not
being implemented on time.
There is no auto-run schedule
set up on the APP side.
The water pump unexpectedly
lost power and the plan was
emptied.
Put the head of hose into
hot water for 10s or Put a
little veggie oil on the end
of the hose before
connecting.
Check that there is no lack
of water in the container at
the water inlet and that the
pump does not car out the
watering schedule when
there is a lack of water.
Once the plan parameters
have been set, the plan will
be executed automatically
according to the parameters
set by checking "Auto Run".
The watering schedule needs
to be reset.
If your Rainpoint product does not operate properly after ting the
troubleshooting steps, please contact us by phone or email :
1-833-3815659 (US Hotline) | se[e-mail]