User Instructions
1.2 Plug in the cable of the UBS po
Note:
EASY TO INSTALL
1. 2 Ways to apply power for activating the pump
- 05 -
1) Plug in the USB cable (included)
2) When the power is on, the indicator will
light up.
· High current suppo is required for pairing
WiFi and accessing APP, so it is only available
in USB cable-powered mode.
· WiFi pairing and APP access are not available
in batte-powered mode only.
· Only manual watering is suppoed in
batte-powered mode.
· When both power modes are used
simultaneously, it will match the USB cable
power rst; when the USB cable is
disconnected, the batte-powered mode is
activated.