® Instruction Manual 1 Zone WiFi Water Timer with WiFi Hub Model: TTV103WRF + TWG004WRF Customer Support: Web: www.rainpointonline.com Email: service@rainpointus.com WhatsApp: +1 626-780-5952 US Free Hotline(English): +1 833-381-5659(MON-FRI 9�30 AM-5�30 PM PST) UK Free Hotline(English Deutsch): +44 800-808-5337(MON-FRI 9�00 AM-5�00 PM CET) (Please scan the QR code to get the fast support) *KEEP THIS MANUAL FOR FUTURE REFERENCE.
EN WELCOME TO RAINPOINT Thank you for chosing RAINPOINT 1 Zone WiFi Water Timer with WiFi Hub! After using the RainPoint WiFi water timer, you'll find it easier, faster and more convenient than ever before! You are able to schedule, manually operate, auto watering and monitor flow just with your smart phone. When the timer is connected to the hub and your WiFi, it can synchronize the weather forecast from internet to automatic update and adjustment your watering plan.
EN CONTENTS INTRODUCTION 5-8 CONTENTS IN THE BOX 05 PRODUCTS OVERVIEW 06 WIFI SOCKET Power ON/OFF By Schedule SMART AUTOMATION TTV103WRF 1 Zone WiFi Water Timer INSTALLATION 22 Automation & Tap-to-Run TWG004WRF WiFi Hub FEATURES OVERVIEW 21 Manual Power ON/OFF How to set the automatic rain delay? 08 HOME MANAGEMENT 9-14 25 STEP 1. INSTALL APP ON YOUR PHONE 09 RESET THE DEVICE 26 STEP 2. CONNECT THE WIFI HUB 10 TROUBLESHOOTING 27 STEP 3. CONNECT THE WIFI TIMER 11 STEP 4.
EN INTRODUCTION CONTENTS IN THE BOX A.1 x TTV103WRF 1 Zone WiFi Water Timer B.1 x TWG004WRF WiFi Hub C.1 x Instruction Manual D.1 x Quick Setup Guide A B C D FCC Notice: FCC STATEMENT: (FCC ID: 2AWDBTTV103WRF, 2AWDBTWG004WRF) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EN PRODUCTS OVERVIEW TTV103WRF 1 Zone WiFi Water Timer Inlet Filter Water Inlet Timer Button LED Indicator Battery Compartment Water Outlet Specification Range Between WiFi Hub and Timer: 160 ft in the open area without interference Working Water Pressure: 0.5 bar to 8 bar(7.25-116.03PSI) Temperature Operating Range: 3°C - 50°C (37°F-122°F ) Power By: 4 AA alkaline batteries (not included) WaterProof: IP54 For outdoor use with cold water only. Keep away from freezing.
EN TWG004WRF WiFi Hub Hub Button Power Indicator WiFi Socket with Power Supply Power Plug Specification Range Between WiFi Hub and Router: 160 ft in the open area without interference Temperature Operating Range: 3°C - 40°C (37°F-104°F ) WiFi Frequency Band: 2.4Ghz Only Input: 100-240V ~ 50Hz 16A For indoor use only. Only applicable to 2.4Ghz WiFi. If your router is a dual-band router, please independently enable the 2.4GHz WiFi band and name it differently from the 5GHz WiFi band.
EN FEATURES OVERVIEW 2.4Ghz WiFi WiFi RF CLOUD ROUTER RF 1) WiFi Remote Control: Connect with 2.4GHz WiFi, set and check irrigation schedule by APP. 2) WiFi Socket: The WiFi Hub can be use as WiFi socket. 3) Manual Watering: Manually turn on/off watering and set watering time. 4) Watering on Schedule: The timer can set up to 3 separate watering programs every day. Each watering programs has different start time and watering duration.
EN INSTALLATION Tips： Please scan the QR code or search the link for setup video or customer support to install the device quickly. Setup Video: www.youtube.com/@rainpoint Customer Support: www.rainpointonline.com/pages/support Setup Video Customer Support STEP 1. INSTALL APP ON YOUR PHONE Rainpoint 1 Download the RainPoint App Search for RainPoint on Google Play or App Store or scan the QR code to download the RainPoint APP.
EN STEP 2. CONNECT THE WIFI HUB 1. Plug your WiFi Hub to an indoor power source near your WiFi router and the outdoor location of your timer. 2. Open RainPoint App and tap Add device or to add a new device. 3. Tap Smart Irrigation and Add Manually , then select Irrigation Hub . 4. select 2.4Ghz WiFi, and enter the password. Tips: If your router is a dual-band router, and you cannot identify the 2.4Ghz or 5Ghz WiFi, please tap the blue words Common router setting method to name the 2.
EN 5. Confirm the power indicator on your WiFi hub blink rapidly (2 times per second). Then the APP will search and pair your WiFi Hub automatically. Tips: If the indicator doesn’t blink rapidly (2 times per second), please tap Resetting Devices and follow the prompts (Or refer to the RESET THE DEVICE section of this manual) to reset the WiFi hub and make the hub indicator blink rapidly. 6. After the connection is successful, the color icon of irrigation hub will be displayed on the APP home screen.
EN 2. Return to the APP home screen, and tap to add the WiFi timer. 3. Tap Smart Irrigation and Add Manually , then select WIFI Water Timer 4. Press and hold the button on the timer until the LED indicator blink rapidly (2 times per second). Then select confirm indicatorrapidly blink and tap Next. The APP will search and pair your WiFi timer automatically.
EN 5. After the connection is successful, the color icons of WiFi timer and WiFi socket will be displayed on the APP home screen. Tips: If necessary, three additional WiFi timers can be added to the RainPoint APP through a WiFi hub. A separate WiFi timer is available on Amazon. STEP 4. INSTALL THE WIFI TIMER Inlet Less than 160 feets (No bushes, walls blocking) Outlet 1. Attach the timer inlet to the outdoor faucet/spigot (hand tighten only).
EN Warnning * The WiFi timer can only be used for cold water. * The WiFi timer uses a 433mHz RF connection to communicate with the WiFi Hub, and must be within a 160ft range, line of sight, of the WiFi Hub. If there are walls, iron gates or bushes blocking, please shorten the distance between them to better receive the signal. * Soil will absorb WiFi and RF signals, the best location of the timer is on the faucet 4 to 8 feet (1.2 to 2.4 meters) above the ground.
EN APP PROGRAMMING APP HOME SCREEN Local Weather Forecast Home Management Get your local weather forecast from You can locate your home, customize website to realize intelligent watering. the home name and add family members. It is convenient for you to manage irrigation schedules for different residences. All Devices Add Devices A check list of all the devices you have You can add multiple RainPoint connected.
EN WIFI WATER TIMER Tap the WiFi water timer on the all devices list of APP home screen.It will display all the parameters and functions of the timer manually set on the APP. Note: The WiFi timer will follow and perform the preset watering schedule after application set successfully, even if the phone or device loses network connection. Device & Third Party Control Tap on the top right of the screen, you will enter the page for device information and third-party control.
How to get third-party control / voice control？ EN If you have an Amazon Alexa or Google Assistant, please tap the icon in the upper right corner of the device page, select a third-party voice control device you own, then tap the operation guide, and follow the instructions to connect your WiFi water timer to the voice control device. After successfully connecting, you can control the WiFi water timer by voice.
EN Watering Plan & Manual Rain Delay Watering Day Of The Week Each plan has a specific color punctuation. The punctuation in a specific color on the day of the week indicates that there is a corresponding watering plan for that day. Plan A / Plan B / Plan C The WiFi timer can set 3 different watering plans every day. Each watering plan can be set with different start time, duration and watering day (frequency). Slide the switch of the watering plan to turn it on or off.
EN Irrigation Mode (Irrigation by quantity) 3. Tap Irrigation Mode. 4. Use the 24H time switch to toggle between 24hr and AM/PM time. 5. Click to select irrigation on amount. 6. Tap Start time to open the clock and set a start time. 7. Click to select irrigation on amount to set the continuous watering volume (From 1L to 10000L,From 1gallon to 2641 gallons). 8. Select the days to repeat watering every week as needed. 9. Save your settings.
EN Mist Mode (Spray by quantity) 3. Tap Mist Mode 4. Use the 24H time switch to toggle between 24hr and AM/PM time. 5. Click to select Mist on amount. 6. Tap Start time to open the clock and set a start time. 7. Tap Misting on amount to set the overall water volume of the misting program (from 0 hour 0 minute to 11 hours to 59minutes). 8. Tap Mist time to set the duration for each misting. 9. Tap Interval to to set the interval time between each misting. 10.
EN WiFi Soil Sensor & Water Flow Meter* WiFi Soil Sensor (sold separately, not included) If you have a Rainpoint WiFi soil sensor, you can pair it with your Rainpoint WiFi water timer and WiFi hub. One WiFi timer can pair with one WiFi soil sensor. And the soil temperature and moisture data monitored by the soil sensor will be displayed on your Rainpoint APP. The soil sensor can also control the watering schedule of the timer.
EN WIFI SOCKET Manual Power ON/OFF 1. Tap the WiFi Socket on the all devices list of APP home screen. 2. Tap the Power to toggle the WiFi socket power on or off Note: Each RainPoint WiFi hub can be used as a WiFi socket. But only when the WiFi timer is successfully paired with the WiFi hub, the WiFi socket device can be added to the APP. Power ON/OFF By Schedule 1. Tap the Timer on the WiFi Socket screen. 2. Tap the Add Schedule to setup a schedule for the WiFi Socket. 3.
EN SMART AUTOMATION Automation & Tap-to-Run Automation means the devices can execute automatically according to the set conditions such as the local weather, device status and time. For example, RAINPOINT APP can obtain the weather forecast information of your home location. When you set the conditions for immediately delaying the watering plan when it rains, the timer will automatically execute the watering delay when it rains in your local area.
EN How to set the automatic rain delay? 1. Tap Smart at the bottom of the APP home screen. 2. Select Automation and tap Create Scene. 3. Set a condition when the weather changes to rain. Note: Please accurately locate the city where your home is located. The APP will automatically obtain weather forecast data based on the city you locate. When the weather forecast turns to rain, the conditions for execution will be triggered. 4. Tap Run the device to set up a task about device operation. 5.
EN 7. Select the trigger condition of your condition to be when all conditions are met or when any one of the conditions is met. If there is only one trigger condition, there is no need to set it here. 8. Check your execution conditions and tasks. 9. Save your settings. For example: The picture on the left shows that when it rains in New York, the valve of the WiFi water timer will be automatically closed, and watering will be delayed for 24 hours.
EN HOME MANAGEMENT Rainpoint supports adding family members and sharing your home device to achieve co-management the home irrigation system with your family. 1. Tap Me at the bottom of the APP home screen. 2. Select Home Management. You can set the current home or create a home or join another home. 3. Set your home name, room management and home location. Note: Home location is related to the weather forecast information obtained by the system. 4.
EN RESET THE DEVICE How to reset the WiFi Hub ? Step 1. Press and hold the button. Please don’t release until the end. Step 2. Plug in the hub and wait for the BLUE light on (Still keep holding the button) Step 3. Keep holding the button. Wait for the BLUE light on for a few seconds and then rapidly flash then the hub is restored to pair mode. Search the link below to visit the WiFi Hub resetting video https://youtu.be/ykucYsxRtTs How to reset the WiFi timer ? Step 1.
EN TROUBLESHOOTING Problem Can't turn on /off the valve Inaccurate water flow meter Possible Cause Possible Solution Low battery Replace fresh batteries Impurities in water inlet Regularly clean the filter port of impurities Unstable network or delayed to avoid disruptions in use. response. Wait a while and try again. Inaccurate statistics due to tilted The water timer needs to be installed mounting angle.
EN Problem Possible Cause Hub cannot connect Possible Solution Not using 2.4GHZ WIFI. Confirm 2.4GHZ WIFI connection. Incorrect WIFI password. Confirm that the WIFI password has been Hub not in pairing state. entered correctly. Press and hold the middle button and insert it into the socket again without releasing the button, do not release the button during this time. After a few seconds the indicator light will come on for a while and then start flashing rapidly.
EN The meaning of LED light LED indicator color of TTV103WRF WiFi water timer 1. Power-on reset: The red and white lights flash alternately 4 times when the machine is turned on. 2. Restore factory settings: Press and hold the timer button while turning on the timer, release the button after the red light flashes, and the timer will enter the factory reset state. 3. Irrigation status: The white light flashes for 3 seconds and lights for 200mS, indicating that the timer is in irrigation status. 4.
EN WARRANTY RainPoint provides a 1-year warranty against manufacturing defects in materials and workmanship from the date of purchase.During the warranty period , we’ll replace free of charge the product found to be defective under reasonable use and service as determined solely by RainPoint. To extend and activate your warranty, please email us with your order ID at service@rainpointus.com and we'll respond within 24 hours.
EN 2.4Ghz WiFi WiFi CLOUD RF ROUTER RF EC REP NAME：VIAJE ELECTRONIC COMPANY LIMITED ADDRESS：E588, 13 ADELAIDE ROAD, DUBLIN, D02 P950, IRELAND Email：VIAJEELE@outlook.
