Instruction Manual

TROUBLESHOOTING
- 27 -
Problem Possible Cause Possible Solution
Can't turn on /o the valve
Inaccurate water ow meter
Timer won't connect
Low batte
Impurities in water inlet
Unstable network or delayed
response.
Inaccurate statistics due to tilted
mounting angle.
Low or erratic water pressure
from the tap
Replace fresh batteries
Regularly clean the lter po of impurities
to avoid disruptions in use.
Wait a while and t again.
The water timer needs to be installed
perpendicular to the ground and it is
recommended that it is not installed at an
angle to avoid aecting the water count.
Normal error values for water counts ± 5%
Check that the WIFI network environment
is working.
Close to hubs and routers when connected
to irrigation timers.
Re-pair the timer: Press and hold the timer
button until the white light ashes rapidly
to indicate pairing. (Or remove the device
from the homepage and reconnect)
Unstable WIFI network.
Long distance from the hub
Timer not in pairing state.
ENENENEN