User Manual

STEP 5. TEST BEFORE USE
C。ngratulati。ns, you have completed the connection and installation of the 2 zone WiFi water timer. Please test
whether the internal valve of your water timer is normal before using it.
1. Keep the faucet turned off.
2. Press and hold the left/right zone button of the timer for 3-5 seconds, with a ”click” sound, the left/right zone valve
inside the timer opens for manual watering. After a few seconds, press and hold the left/right zone button again,
the ”click” will sound again, and the left/right zone valve will close
3. Turn on the faucet a little bit, press and hold the left/right zone button of the timer to check if the water flow out or
shut off as expected. If yes, the valve is normall, please use it with confidence! If not, please repeat the above steps
several times.
The test is 。ver, eveything is n。rmal, please keep the faucet fully turned 。n!
N。te:
When testing, please keep away from the timer outlet to avoid being splashed and wet.
- 10-