User manual

US English User Manual RAIS X-Basic, RAIS X-Front & RAIS X-Board
8
Chimney
RAIS stoves must be installed using a Class A UL 103 HT approved factory-built chimney sys-
tem or a code-approved masonry chimney with a ue liner. In Canada, the installation must
conform to CAN/CSA-B365.
The chimney must extend through the roof at least 3’ (1m), and 2’ (.6m) above any structure
within 10’ (3m).
The condition and height of the chimney are very important for optimal use of the stove and
we recommend a total minimum height of 10’ (3m).
Note the chimney connector pipe should not pass through an attic, roof space, closet, con-
cealed space, oor or ceiling.
Do not connect this stove to a chimney ue or air distribution duct or any system serving
another appliance.
Each chimney connector or stove pipe section, must be installed to each other with the
crimped end toward the stove. This prevents any amount of condensed or liquid creosote
from running down the outside of the pipe or the stove top.