RC953-8FE16E1 Inverse Multiplexing Ethernet Gateway User manual Raisecom Technology Co.
Contents 1. Cautions.............................................................................................................. 1 2. Overview............................................................................................................. 2 2.1. 2.2. 2.3. 3. Parameters ......................................................................................................... 4 3.1. 3.2. 3.3. 3.4. 3.5. 3.6. 3.7. 4. Main features ............................................................
Raisecom Technology Co., Ltd 1. Cautions Please read the following notices carefully before installing and using the device, Raisecom does not respond to any loss that caused by violating safety notice. This series product is integrated device that has precise elements, please avoid violent shakes and impacts, and do not disassemble or maintain the device yourself. If it is required, please do it under the guide of our technical staff following in the steps of anti static.
Raisecom Technology Co., Ltd 2. Overview RC953-8FE16E1 is an Inverse Multiplexing Ethernet Gateway that delivers Ethernet services over existing TDM transportation network. It can be deployed in central site for aggregating subscribers or in customer premises enabling Inverse Multiplexing for enlarging much more bandwidth. RC953-8FE16E1 provides 8 Ethernet ports and 16 E1 ports (both balanced and unbalanced) for subscribers and functions as a bridge between IP-based network and leased circuits.
Raisecom Technology Co., Ltd z z z z z z z z E1 loop back and BERT function Complete E1 line indicators on front panel E1 interface type: 2 DB37 for both balanced and unbalanced interfaces SNMP, CONSOLE and Telnet management (any of the 8 fast Ethernet can be SNMP network management interface) and support local and remote field firmware upgrade. 1U chassis and can be installed in 19’’ rack Redundant power supply Power consumption <20W (at maximum load) Working temperature: -5℃- 50℃ 2.2.
Raisecom Technology Co., Ltd 3. Parameters 3.1. Basic configuration z z z Main circuit: 8 fast Ethernet ports, 16 E1 ports. Power supply: two power supply modules, 90-264V/AC or -36V- -72V/DC. Management interface: CONSOLE, SNMP network management interface (utilize any of the 8 fast Ethernet ports). 3.2. Ethernet interface parameters z z z z z Speed: 10/100M auto-negotiation Connector: RJ-45 IEEE802.3 compliant IEEE802.3x flow control AUTO-MDI/MDIX 3.3.
Raisecom Technology Co.
Raisecom Technology Co., Ltd 4. How to use 4.1. Front panel explanation RC953-8FE16E1 1 2 3 5 4 7 6 9 8 Figure 4-1 Front Table 4-1 Explanation of RC953-8FE16E1 front panel N o. Explanati on 1 Grounding SYS 2 and Indicator color Green Description SYS, Flashing indicates CPU work normally. PWR, ON indicates equipment is powered on. PWR indicator PWR1 and Green PWR1, ON indicates the first power supply works normally PWR2, ON indicates the second power supply works normally.
Raisecom Technology Co., Ltd OFF OFF ON The first power supply works abnormally, the second works normally but the main circuit works abnormally. OFF OFF OFF Not powered on or neither of the power supply module works normally. 4 CONSOL Local management port which connects to management PC E Green/or Ethernet 5 ange 1-8 fast Ethernet ports. And each port has two indicators: LNK/ACT (green) and 100M indicator (orange).
Raisecom Technology Co., Ltd Table 4-2: explanation of RC953-8FE16E1 rear panel Numb er Explanation Power 1 Description supply switch for the ON/OFF. device 2 Power supply connector Two types, AC and DC.
Raisecom Technology Co., Ltd 5.
Raisecom Technology Co., Ltd 6. Installation & Preparation 6.1. Preparation before Installation Please check if the models and part numbers are in consistence first, and also check if the equipments are damaged. There must be drying process if the equipment is damped. Please follow the following steps when install and use this equipment: ● Carefully read this manual ● Prepare all kinds of the cable. Ensure that they are not short-circuited. Refer to Appendix A for cable making.
Raisecom Technology Co., Ltd 6.2.2. Connect the fast Ethernet port Connect one end of the Cat. 5 UTP cable with Ethernet router/switch and one end of the cable with the fast Ethernet port of RC953-8FE16E1. The LNK/ACT indicator will be ON after correct connection. 6.2.3. Connect the SNMP network management port Connect one end of the Cat. 5 UTP cable with management PC and one end of the cable with the fast Ethernet port of RC953-8FE16E1. The LNK/ACT indicator will be ON after correct connection. 6.2.4.
Raisecom Technology Co., Ltd connect “-48V” end with the lower electric level cable, “0V” end with higher electric level cable. Make sure no reverse connection, or no short circuited, and then turn on power. When Power Supply is turned on, the PWR indicator should be ON. 6.2.6. Service configuration Please refer to the command notebook and configuration guide of RC953-8FE16E1 for the service configuration.
Raisecom Technology Co., Ltd 7. Q & A If there are any problems during installation and using, try the following proposals. If the problems still can not be solved, please contact distributors/agents for help. ● If PWR, PWR1 and PWR2 are all OFF Please check if power supply cable is connected and then check if the Power Supply Board works normally *Explanation of PWR, PWR1and PWR2 combination: PWR PWR1 PWR2 Explanation ON ON ON The two power supply modules and main circuit works normally.
Raisecom Technology Co., Ltd 8. Appendix A: How to make CONSOLE cable Pin definitions: RJ45 pins Function DS9 pins 1 NC - 2 DSR# 6 3 RxD 3 4 GND 5 5 GND 5 6 TxD 2 7 DTR# 4 8 NC - “-” indicates the relative RJ45 pin is not connected (NC). DB9 pins which are not in the list are not connected (NC).
Raisecom Technology Co., Ltd 9. Appendix B: Abbreviations EoPDH PDH Ethernet over PDH Pseudo-synchronous Digital Hierarchy.
Raisecom Technology Co., Ltd @2006 Raisecom Technology Co., Ltd. All trademarks are the property of their respective owners. Technical information may be subject to change without prior notification.
