User's Manual
Table Of Contents
- FCC Compliance Statements
- IC Compliance Statements
- Copyright Statement
- Preface
- 1 Introduction to BreadCrumbs
- 2 Description of a BreadCrumb LX/LX3
- 3 Using BC|Commander
- 4 Deploying the BreadCrumb Wireless Network
- 5 BreadCrumb LX/LX3 Firmware Upgrade
- 6 Troubleshooting
- Appendix A: Error and Warning Codes
- Appendix B: Using Pole Mount Bracket
BreadCrumb
®
LX/LX3 User Guide Rajant Corporation
Version: 3.00 03-100101-001
2.2 Enclosure
The LX/LX3 enclosure has been designed to operate in extreme conditions. The Ingress Protection
(IP) rating of the enclosure has been tested per IEC 60529. The enclosure has demonstrated
performance compliant to IP67 requirements, providing complete protection against ingress of dust
(6) as well as protection against immersion in water (7).
The external features of the enclosure are shown in Figure 3 and Figure 4.
8
A: USB Port. (LX and LX3)
B: Status LED. (LX and LX3)
C: ETH0/PWR RJ45 Port. (LX and LX3)
D: ETH1 RJ45 Port. (LX and LX3)
E: Zeroize Keys and Restore Factory Defaults / LED Configuration Switch (LX and LX3)
F: Type N RF Connector for the 2.4 GHz Antenna. (LX and LX3)
Figure 3: BreadCrumb LX/LX3 Enclosure Features (Top-Front Side).