User's Manual
Table Of Contents
- FCC Compliance Statements
- IC Compliance Statements
- Copyright Statement
- Preface
- 1 Introduction to BreadCrumbs
- 2 Description of a BreadCrumb LX/LX3
- 3 Using BC|Commander
- 4 Deploying the BreadCrumb Wireless Network
- 5 BreadCrumb LX/LX3 Firmware Upgrade
- 6 Troubleshooting
- Appendix A: Error and Warning Codes
- Appendix B: Using Pole Mount Bracket
BreadCrumb
®
LX/LX3 User Guide Rajant Corporation
Version: 3.00 03-100101-001
Warning
In order to avoid sparking and possible damage to the unit, be sure to connect the
powered Ethernet cable to the BreadCrumb LX/LX3 before applying power to the
power supply.
2.5 Status LED
The Status LED (see Figure 5) is capable of displaying warning and error codes, and link states. The
LED Mode can be configured in BC|Commander to be ON (switchable), ALERTS ONLY
(switchable), OFF (non-switchable), or OFF (switchable). When the LED Mode is ON, the
BreadCrumb LED alternates between displaying the link state and any warnings or errors. When the
LED Mode is OFF, the BreadCrumb LED does not display any warnings, errors, or the link state.
When the LED Mode is set for ALERTS ONLY, the BreadCrumb LED alternates between displaying
the link state and any warnings or errors only if there are warnings or errors to report. If there are no
warnings or errors, the LED displays nothing.
The Status LED combines the three base colors of red, green and blue to display a broader spectrum
of colors which indicate the current status of a BreadCrumb. The meanings of the color code
indicators are given in Table 7.
12
Figure 5: BreadCrumb LX/LX3 Ethernet and Passive PoE Connections.