User's Manual
Table Of Contents
- FCC Compliance Statements
- IC Compliance Statements
- Copyright Statement
- Preface
- 1 Introduction to BreadCrumbs
- 2 Description of a BreadCrumb LX/LX3
- 3 Using BC|Commander
- 4 Deploying the BreadCrumb Wireless Network
- 5 BreadCrumb LX/LX3 Firmware Upgrade
- 6 Troubleshooting
- Appendix A: Error and Warning Codes
- Appendix B: Using Pole Mount Bracket
Rajant Corporation BreadCrumb
®
LX/LX3 User Guide
03-100101-001 Version: 3.00
Appendix B: Using Pole Mount Bracket
1. Use the supplied four (4) M5 screws to attach the mounting bracket to the LX/LX3.
2. Use the U-Bolts to attach LX/LX3 Pole Mount Bracket to a pole.
3. Tighten the four (4) nuts on the two (2) U-Bolts to secure the LX/LX3 assembly to the pole.
B-1
Figure 7: U-Bolts Holding the LX Pole Mount Bracket to a Pole.
Figure 6: LX Pole Mount Bracket with U-Bolts.