User's Manual

BreadCrumb
®
LX User Guide Rajant Corporation
June 25, 2008 Version 1.02
- 27 -
APPENDIX A
Error codes are divided into groups. Groups are indicated by the first digit of the error number. A full
error code will be formed by prefixing a group number to the error number.
Example: ‘Could not mount the USB drive.’ error (4) of the ‘LX USB Firmware Upgrade’ group (1)
will be represented by error code 14.
Error codes by group (grouped by first digit)
LX USB Firmware Upgrade Error Codes (1*)
11 - Flash image file rajant/
breadcrumb_${UPGRADE_VERSION}_${PLATFORM}${UPGRADE_
ADDITIONALINFO}.flash does not exist.
12 - Current flash image version is greater than or equal to versions of files found on
USB drive
13 - No flash image files found.
14 - Could not mount the USB drive.
15 - Unlocking of /dev/mtd0 failed.
16 - fconfig for SetFailsafeBoot? failed.
17 - Unlocking of /dev/mtd0 failed.
18 - fconfig for SetMainBoot? failed.
19 - Copying of zImage failed!!
111 - Copying of ramdisk failed.
112 - FIS directory update of ramdisk failed.
113 - Copying of etc failed.
114 - FIS directory update of /etc failed.
115 - Copying failed.
116 - flashunbundle failed.
117 - Version information in flash file name and breadcrumb-buildinfo.conf do not
match.
118 - Untar failed.
119 - FIS directory update of zImage failed.
121 - Failed to unmount /etc.
122 -.In Failsafe mode, but no USB drive detected.
Self-Test Error Codes. (3*)
31 - Hardware configuration not set. Run factory-init.
32 - BreadCrumb has been zeroized
33 - Radio not detected. Turn the unit off, and then back on. If the problem persist, contact
technical support.