User's Manual

BreadCrumb
®
LX/LX3 User Guide Rajant Corporation
Version: 2.94 03-100101-001
Problem Resolution
using the software accompanying your
wireless card.
● Ensure that the wireless client’s IP
address settings are configured properly.
● Ensure that the security settings on the
client device and BreadCrumb devices
match.
● Ensure that the client device is not
prevented from connecting by an ACL.
● Ensure that the VLAN settings for the
BreadCrumb allow clients of the ESSID
being used to communicate to the Local
Port of the BreadCrumb. See the VLAN
section of the BC|Commander manual
for more information.
5.2 BreadCrumb Device Cannot Connect to BCWN
Table 11: BreadCrumb to BCWN Connectivity Issues.
Problem Resolution
Discharged batteries can cause the BreadCrumb
device to appear to power up, but not be able to
establish connectivity to the BCWN.
When deploying the BCWN, ensure that the
batteries are fully charged.
When using external antennas, faulty cable
connections or crimped cables can result in
difficulty establishing and maintaining network
connectivity.
Check antenna cables and their connections to
the BreadCrumb device.
26