User's Manual
Table Of Contents
- FCC and IC Statements
- Copyright Statement
- Preface
- 1 Introduction
- 2 Using BC|Commander
- 3 Deploying the BreadCrumb Wireless Network
- 4 BreadCrumb USB Firmware Upgrade
- 5 Troubleshooting
- Appendix A: Error and Warning Codes
- Appendix B: Using Pole Mount Bracket
Rajant Corporation BreadCrumb
®
LX/LX3 User Guide
03-100101-001 Version: 2.94
34*$"7%0
1. Use the supplied four (4) M5 screws to attach the mounting bracket to the LX/LX3.
2. Use the U-Bolts to attach LX/LX3 Pole Top Bracket to a pole.
3. Tighten the four (4) nuts on the two (2) U-Bolts to secure the LX/LX3 assembly to the pole.
B-1
Figure 7: U-Bolts Holding the LX Pole-Top Bracket to a Pole.
Figure 6: LX Pole-Top Bracket with U-Bolts.