User's Guide
Table Of Contents
- FCC Compliance Statements
- IC Compliance Statements
- Copyright Statement
- Preface
- 1 Introduction to BreadCrumbs
- 2 Description of a BreadCrumb LX4
- 3 Using BC|Commander
- 4 Deploying the BreadCrumb Wireless Network
- 5 BreadCrumb LX4 Firmware Upgrade
- 6 Troubleshooting
- Appendix A: Error and Warning Codes
BreadCrumb
®
LX4 User Guide Rajant Corporation
Version: 2.02 03-100117-001
sequence of long and short blinks in red, indicating the error code. Take note of the error
code (see Appendix A for an explanation of error codes). Leaving the USB storage
device connected, turn power to the BreadCrumb OFF and then ON again. Observe the
Status LED to monitor progress. If, during this second firmware upgrade attempt,
another error occurs, take note of the new error code and then apply for technical support.
6. When complete, turn power to the BreadCrumb OFF, disconnect the USB storage device,
then turn power to the BreadCrumb back ON.
24