User's Manual
Table Of Contents
- 1.0 PREFACE
- 2.0 INTRODUCTION
- 3.0 USING BCADMIN™
- _
- 3.1 SCREEN LAYOUT
- 3.2 ANATOMY OF A CONNECTION LINE
- 3.3 CONFIGURING THE BREADCRUMB
- 3.4 RADIO SETTINGS
- 3.5 REACHBACK SETTINGS
- 3.6 FORWARDING SETTINGS
- 3.7 SECURITY
- 3.8 BCADMIN PREFERENCES
- 3.9 MAPPING WITH FUGAWI TRACKER
- 4.0 DEPLOYING THE BREADCRUMB WIRELESS LAN
- 6.0 Troubleshooting
Rajant Corporation ME BreadCrumb User Guide
3.8 BCADMIN PREFERENCES
Settings specific to BCAdmin are available through the View menu, under Preferences. The Preferences
window is shown below:
Figure 17. BC Admin Preferences Window
The first three fields are described in this section. The remaining fields are described below in the Section called
Mapping with Fugawi Tracker.
3.8.1 BREADCRUMB INACTIVITY THRESHOLD (SECONDS)
If BCAdmin receives no update from a BreadCrumb device for this amount of time, the BreadCrumb box will
turn red in the Topology View to call the administrator’s attention to a possible problem. A red BreadCrumb box
will return to normal up on receipt of an update from the BreadCrumb device, and its inactivity timer will be
reset.
3.8.2 GPS STALENESS WARNING THRESHOLD (MINUTES)
For GPS-enabled BreadCrumb devices, position information shown in BCAdmin is marked as ‘stale’ if it has not
been updated for this period of time (for example, if the BreadCrumb device’s GPS receiver is no longer able to
determine its location).
3.8.3 DEFAULT BATTERY WARNING THRESHOLD (MINUTES)
For BreadCrumb devices with no battery warning threshold set, this setting will be used.
- 30 -