RAK4260 LoRa Module User’s Manual v1.0 MAY 2019 Note: All information contained in these materials represents information on the product at the time of publication and is subject to change without notice. Please visit Rakwireless website (www.rakwireless.com) for the latest update.
Rakwireless Public Release Prepared (also subject responsible if other) 2 (20) No. Hairui Tao Approved Checked Ken Yu Date Rev Reference V0.1 Table of Contents 1 1.1 2 Overview ................................................................................................................................ 3 Introduction ................................................................................................................................. 3 RAK4260 LoRa Module...........................
Rakwireless Public Release Prepared (also subject responsible if other) 3 (20) No. Hairui Tao Approved Checked Ken Yu Date Rev Reference V0.1 1 Overview 1.1 Introduction ARAK4260 is a Module that designed base on the chip of Micorchip’sATSAMR34J18B.It uses a 32-bit ARM Cortex -M0+ processor and offers up to 256KB of flash and 40KB SRAM. It combined with a UHF transceiver that can support LoRa and FSK modulation.
Rakwireless Public Release Prepared (also subject responsible if other) 4 (20) No. Hairui Tao Approved Checked Date Rev Ken Yu 2.3 Reference V0.1 Operating Frequencies WISDUO-LORARAK4260LoRaModule support all LoRaWAN frequency channels as below. Which is easy to configure while building the firmware from the source code. Region EU Frequency ( MHz ) 868(863~870) AS 923 KR 920 AU 915 US 915(902~928) IN 865 2.4 Power Consumption Item power consumption OUTPUT POWER 20dB(MAX) 126.
Rakwireless Public Release Prepared (also subject responsible if other) No. Hairui Tao Approved Checked Ken Yu Date Rev V0.1 Receive mode 13.6mA Sleep mode 860nA OUTPUT POWER 20dB(MAX)PA_BOOST mode: OUTPUT POWER 17dB(PA_BOOST mode): V=3.
Rakwireless Public Release Prepared (also subject responsible if other) No. Hairui Tao Approved Ken Yu OUTPUT POWER 14dB(RFO_HF mode): Checked Date Rev V0.
Rakwireless Public Release Prepared (also subject responsible if other) No. Hairui Tao Approved Ken Yu Receive mode: Checked Date Rev V0.
Rakwireless Public Release Prepared (also subject responsible if other) No. Hairui Tao Approved Ken Yu Sleep mode(Backup mode): Checked Date Rev V0.
Rakwireless Public Release Prepared (also subject responsible if other) No. Hairui Tao Approved Ken Yu Checked Date Rev V0.
Rakwireless Public Release Prepared (also subject responsible if other) No. Hairui Tao Approved Ken Yu Checked Date Rev V0.1 2.5 Sensitivity Level The following chart shows the receiving sensitivity of RAK4260 at 868Mhz.
Rakwireless Public Release Prepared (also subject responsible if other) No. Hairui Tao Approved Checked Date Ken Yu Rev Reference V0.1 2.
Rakwireless Public Release Prepared (also subject responsible if other) 12 (20) No. Hairui Tao Approved Checked Ken Yu Date Rev Reference V0.
Rakwireless Public Release Prepared (also subject responsible if other) No. Hairui Tao Approved Checked Date Ken Yu 2.7 Typical Application Circuit Rev V0.
Rakwireless Public Release Prepared (also subject responsible if other) No. Hairui Tao Approved Checked Date Ken Yu 2.8 Rev V0.
Rakwireless Public Release Prepared (also subject responsible if other) No. Hairui Tao Approved Ken Yu Checked Date Rev V0.
Rakwireless Public Release Prepared (also subject responsible if other) No. Hairui Tao Approved Checked Ken Yu Rev V0.1 3 Source Code 4 Required Software 4.1 Uploading Firmware 5 Contact Information Shenzhen Email: Tel: Date ken.yu@rakwireless.
Rakwireless Public Release Prepared (also subject responsible if other) No. Hairui Tao Approved Checked Ken Yu Date Rev V0.1 Fax: 0755-86152201 Website: http://www.rakwireless.
Rakwireless Public Release Prepared (also subject responsible if other) 18 (20) No. Hairui Tao Approved Checked Date Ken Yu Rev Reference V0.1 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Rakwireless Public Release Prepared (also subject responsible if other) 19 (20) No. Hairui Tao Approved Checked Date Rev Ken Yu Reference V0.1 Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules CFR 47 FCC PART 15 SUBPART C has been investigated. It is applicable to the modular. 2.3 Specific operational use conditions This module is stand-alone modular.
Rakwireless Public Release Prepared (also subject responsible if other) 20 (20) No. Hairui Tao Approved Checked Date Ken Yu Rev Reference V0.1 2.10 Additional testing, Part 15 Subpart B disclaimer Host manufacturer is responsible for compliance of the host system with module installed with all other applicable requirements for the system such as Part 15 B Revision History Revision Description Date 1.
