Manualshelf

Installation & Assembly

ManualsBrandsRalph Lauren Home ManualsFlush MountsMarine 2-Light 9.5" Flush Mount
1
RL19026
ASSEMBLY & INSTALLATION GUIDE
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
1. Install threaded stud into cross bar and tighten nut.
The stud should project about 1/4” beyond the fixture body.
2. Mount cross bar to outlet box using outlet box screws.
3. Make electrical connections using wire nuts. If there is no green ground wire from the outlet box,
connect the fixture ground wire to the cross bar with the green screw provided.
4. Attach fixture over outlet box with cap nut.

Summary of content (1 pages)