MSDS

Base 2 Semi Gloss Interior Paint
Product name
1
Product code
Date of issue
Version
RLB4012
12 February 2014
Store in accordance with local regulations. Store in original container protected from
direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials
(see Section 10) and food and drink. Keep container tightly closed and sealed until
ready for use. Containers that have been opened must be carefully resealed and kept
upright to prevent leakage. Do not store in unlabeled containers. Use appropriate
containment to avoid environmental contamination. Do not store below the following
temperature: 32F / 0C.
Put on appropriate personal protective equipment (see Section 8). Eating, drinking
and smoking should be prohibited in areas where this material is handled, stored and
processed. Do not swallow. Do not get in eyes or on skin or clothing. Avoid breathing
vapor or mist. If during normal use the material presents a respiratory hazard, use only
with adequate ventilation or wear appropriate respirator. Keep in the original container
or an approved alternative made from a compatible material, kept tightly closed when
not in use. Empty containers retain product residue and can be hazardous. Do not
reuse container. If this material is part of a multiple component system, read the
Material Safety Data Sheet(s) for the other component or components before blending
as the resulting mixture may have the hazards of all of its parts.
Handling and storage
Handling
Storage
:
:
7 .
Exposure controls/personal protection
8 .
Acceptable Maximum Peak
A
=
ACGIH
=
American Conference of Governmental Industrial Hygienists.
C
=
Ceiling Limit
Potential skin absorption
S
SR
=
Respiratory sensitization
=
Skin sensitization
SS
TD
=
Total dust
Key to abbreviations
Safety glasses with side shields.
Personal protection
Eyes
Consult local authorities for acceptable exposure limits.
:
Engineering measures
:
If user operations generate dust, fumes, gas, vapor or mist, use process enclosures,
local exhaust ventilation or other engineering controls to keep worker exposure to
airborne contaminants below any recommended or statutory limits.
Hygiene measures
:
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Recommended monitoring
procedures
:
If this product contains ingredients with exposure limits, personal, workplace
atmosphere or biological monitoring may be required to determine the effectiveness of
the ventilation or other control measures and/or the necessity to use respiratory
protective equipment. Reference should be made to appropriate monitoring standards.
Reference to national guidance documents for methods for the determination of
hazardous substances will also be required.
=
Threshold Limit Value
TLV
TWA
=
Time Weighted Average
Fume
=
F
IPEL
=
Internal Permissible Exposure Limit
=
Occupational Safety and Health Administration.
OSHA
R
=
Respirable
OSHA 29CFR 1910.1200 Subpart Z - Toxic and Hazardous Substances
=
Z
titanium dioxide
TWA
10 mg/m³
15 mg/m³ TD
10 mg/m³ TD
10 mg/m³
(as Ti)
Not
established
STEL
Not
established
Not
established
Not
established
20 mg/m³
(as Ti)
Not
established
____________________________
___________
___________
___________
___________
___________
___________
Nepheline syenite
TWA
Not
established
Not
established
10 mg/m³ TD
Not
established
Not
established
____________________________
___________
___________
___________
___________
___________
___________
Name
Result
ACGIH
OSHA
Ontario
Mexico
PPG
STEL
=
=
Short term Exposure limit values
Page: 3/7
United States - Canada - Mexico
Pow ered by IHS