Instructions for iPad and other Device Cradles User guide

CHANGING LOCK COMBINATION:
UNLOCK MODE:
National Products, Inc., 8410 Dallas Ave S., Seattle, WA 98108, [phone] www.ram-mount.com
COMBINATION LOCK INSTRUCTIONS
National Products, Inc., 8410 Dallas Ave S., Seattle, WA 98108, [phone] www.ram-mount.com
COMBINATION LOCK INSTRUCTIONS
WARNING: BACKUP CODE NOT AVAILABLE IF
COMBINATION IS FORGOTTEN OR LOST.
FACTORY PRESET: “1 1 1 1”
TO UNLOCK, ALIGN PRESET OR CURRENT COMBINATION (A) AND
PULL PLUNGER OUTWARD (B) UNTIL INDENTATION IN PLUNGER
IS VISIBLE NEXT TO ARROW (C).
2. ON REVERSE SIDE, MOVE THE SLOT TO THE
LEFT OF THE COMBINATION NUMBERS (D)
DOWNWARD UNTIL IT STOPS (E).
3. SET NEW COMBINATION ON THE FRONT SIDE OF
LOCK IN LINE WITH ARROW.
4. MOVE SLOT UPWARD TO ORIGINAL
POSITION UNTIL IT STOPS (F).
D
E
(BACK SIDE OF LOCK)
(BACK SIDE OF LOCK)
1. SET LOCK TO UNLOCK MODE (SEE ABOVE)
F
A
B
C
(FRONT SIDE OF LOCK)