2011 RAM TRUCK CHASSIS CAB Chrysler Group LLC 11DD43-126-AC Second Edition Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION 1 CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Van Conversions/Campers . . . . . . . . . . . . . . . . . 6 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Identification Number .............. 7 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . . 6 䡵 Vehicle Modifications/Alterations . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by Warranty Information, and various customer-oriented documents.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 7 NOTE: It is illegal to remove or alter the VIN. VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is found on the left front corner of the instrument panel, visible through VEHICLE MODIFICATIONS/ALTERATIONS the windshield. This number also appears on the AutoWARNING! mobile Information Disclosure Label affixed to a window on your vehicle, the vehicle registration and title.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 12 ▫ General Information . . . . . . . . . . . . . . . . . . . 18 ▫ Wireless Ignition Node (WIN) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 12 䡵 Vehicle Security Alarm — If Equipped . . . . . . . . 18 ▫ Key FOB . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 ▫ Removing Key FOB From Ignition . . . . . . . . . 14 ▫ Key-In-Ignition Reminder . . . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Remote Open Window Feature — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . 24 ▫ Programming Additional Transmitters . . . . . . 24 ▫ Transmitter Battery Replacement . . . . . . . . . . 24 ▫ General Information . . . . . . . . . . . . . . . . . . . 25 䡵 Remote Starting System — If Equipped . . . . . . . 26 ▫ How To Use Remote Start . . . . . . . . . . . . . . . 26 䡵 Door Locks .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Driver And Right Front Passenger 䡵 Engine Break-In Recommendations . . . . . . . Supplemental Restraint System (SRS) – 䡵 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . Airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 ▫ Transporting Passengers . . . . . . . . . . . . . ▫ Airbag System Components . . . . . . . . . . . . . . 53 ▫ Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . ▫ Advanced Front Airbag Features . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Key Fob with Remote Keyless Entry (RKE) — If Equipped Your vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the Key Fob into the ignition switch with either side up. Standard Blade Ignition Key — If Equipped Your vehicle may use a standard blade key ignition system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Key Fob The Key Fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and rotate to the desired position. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the RKE transmitter go dead.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To remove the emergency key, slide the mechanical latch Removing Key Fob From Ignition at the top of the Key Fob sideways with your thumb and Place the shift lever in PARK (if equipped with an automatic transmission). Turn the Key Fob to the OFF then pull the key out with your other hand. position and then remove the Key Fob.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information. WARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the keys in the ignition. A child could operate power windows, other controls, or move the vehicle.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SENTRY KEY姞 The Sentry Key威 Immobilizer System prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked. bulb check, it indicates that there is a problem with the electronics. In addition, if the light begins to flash after the bulb check, it indicates that someone used an invalid Key Fob to try to start the engine.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 All of the Key Fobs provided with your new vehicle have Duplication of Key Fobs may be performed at an authobeen programmed to the vehicle electronics. rized dealer, this procedure consists of programming a blank Key Fob to the vehicle electronics. A blank Key Fob Replacement Keys is one that has never been programmed.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Security Light will flash. Use of the Sentry Key威 will General Information The Sentry Key威 system complies with FCC rules Part 15 disable the alarm. and with RSS-210 of Industry Canada. Operation is Rearming Of The System subject to the following conditions: The Vehicle Security Alarm will rearm itself after the 15 additional minutes of headlights and Vehicle Security • This device may not cause harmful interference.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 NOTE: If the Vehicle Security Light stays on continu- Vehicle Security Alarm will arm regardless of whether ously during vehicle operation, have the system checked you are in the vehicle or not. If you remain in the vehicle and open a door, the alarm will sound. If this occurs, by an authorized dealer. disarm the Vehicle Security Alarm. To Disarm The System Use the RKE transmitter to unlock the door.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE at speeds 5 mph (8 km/h) and above disables the system NOTE: • The front courtesy overhead console and door cour- from responding to all RKE transmitter buttons for all tesy lights do not turn off if the dimmer control is in RKE transmitters. the “Dome ON” position (extreme top position). • The illuminated entry system will not operate if the dimmer control is in the “dome defeat” position (extreme bottom position).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 setup for driver door first, otherwise this will unlock all doors), or twice within five seconds to unlock all doors. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. Remote Key Unlock, Driver Door/All Doors First This feature lets you program the system to unlock either the driver’s door or all doors on the first press of the UNLOCK button on the RKE transmitter.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Flash Lamps With Remote Key Lock This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmitter. This feature can be turned on or turned off. To change the current setting, proceed as follows: • For vehicles equipped with the EVIC, refer to “Electronic Vehicle Information Center (EVIC)/CustomerProgrammable Features (System Setup)” in “Understanding Your Instrument Panel” for further information. 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Sound Horn With Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the RKE transmitter. This feature can be turned on or turned off. To change the current setting, proceed as follows: • For vehicles equipped with the EVIC, refer to “Electronic Vehicle Information Center (EVIC)/CustomerProgrammable Features (System Setup)” in “Understanding Your Instrument Panel” for further information. 3.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Using The Panic Alarm • You may need to be less than 35 ft (11 m) from the To turn the Panic Alarm feature ON or OFF, press and vehicle when using the RKE transmitter to turn off the hold the PANIC button on the RKE transmitter for at Panic Alarm due to the radio frequency noises emitted least one second and release. When the Panic Alarm is on, by the system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 1. With the RKE transmitter buttons facing down, use a • This device must accept any interference received, flat blade screwdriver to pry the two halves of the RKE including interference that may cause undesired transmitter apart. Make sure not to damage the seal operation. during removal. NOTE: Changes or modifications not expressly ap2. Remove and replace the battery.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE REMOTE STARTING SYSTEM — IF EQUIPPED This system uses the Remote Keyless Entry (RKE) transmitter to start the engine conveniently from outside the vehicle while still maintaining security. The system has a range of approximately 300 ft (91 m). NOTE: The vehicle must be equipped with an automatic transmission to be equipped with Remote Start.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 Remote Start Abort Message On Electronic Vehicle Information Center (EVIC) — If Equipped The following messages will display in the EVIC if the vehicle fails to remote start or exits remote start prematurely: • Remote Start Aborted - Door Ajar • Remote Start Aborted - Hood Ajar • Remote Start Aborted - Fuel Low will chirp twice (if programmed). Once the vehicle has started, the engine will run for 15 minutes.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE message “Turn To On” will flash in the EVIC until you NOTE: To avoid unintentional shut downs, the system turn the ignition switch to the ON/RUN position. will disable the one time press of the REMOTE START button for two seconds after receiving a valid Remote Remote Start Comfort Systems — If Equipped Start request.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 DOOR LOCKS Manual Door Locks Front and rear doors may be locked by moving the lock knob down or unlocked by moving the lock knob up. Front doors may be opened with the inside door handle without lifting the lock knob. Doors locked before closing will remain locked when closed. The emergency key will unlock the driver door lock on your vehicle.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you press the power door LOCK switch while the Key Power Door Locks — If Equipped A power door LOCK switch is on each front door trim Fob is in the ignition, and any front door is open, the panel. Use this switch to lock or unlock the doors. power locks will not operate. This prevents you from accidentally locking your Key Fob in the vehicle. Removing the Key Fob or closing the door will allow the locks to operate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 6. The doors were not previously locked using the power 2. Within 15 seconds, cycle the ignition switch between door lock switch or Remote Keyless Entry (RKE) LOCK and ON/RUN and then back to LOCK four times ending up in the LOCK position (do not start the engine). transmitter 3. Within 30 seconds, press the power door LOCK switch Automatic Door Locks Programming — If to lock the doors. Equipped The Automatic Door Locks feature can be enabled or 4.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Unlock Doors — If Equipped This feature unlocks all of the doors of the vehicle when either front door is opened. This will occur only after the vehicle has been shifted into the PARK position after the vehicle has been driven (shifted out of PARK and all doors closed). 2. Fasten your seat belt. (Fastening the seat belt will cancel any chimes that may be confusing during this programming procedure.) 3. Insert the Key Fob into the ignition. 4.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Child-Protection Door Lock To provide a safer environment for children riding in the rear seat, the rear doors (if equipped) of your vehicle have the Child-Protection Door Lock system. To use the system, open each rear door, use a flat blade screwdriver (or emergency key) and rotate the dial to engage and disengage the Child-Protection locks.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged. WINDOWS Power Windows – If Equipped NOTE: • After setting the Child-Protection Door Lock system, always test the door from the inside to make certain it is in the desired position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 The control on the left front door panel has UP-DOWN switches that give you fingertip control of all power windows. There is a single opening and closing switch on the front passenger door for passenger window control and on the rear doors of the Crew Cab models. The windows will operate when the ignition switch is turned to the ON/RUN or ACC position, and for up to 10 minutes after the ignition is turned OFF or until a front door is opened.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To open the window part way, press to the first detent conditions may trigger the auto reverse function unexpectedly during auto closure. If this happens, pull the and release it when you want the window to stop. switch lightly to the first detent and hold to close the Auto-Up Feature With Anti-Pinch Protection window manually.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 2. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open. Window LOCKOUT Switch (4–Door Models Only) The window LOCKOUT switch on the driver’s door allows you to disable the window control on the other doors. To disable the window controls on the other doors, press the window LOCK button into the latched or down position.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE normal occurrence and can be minimized. If the rear If you will be carrying children too small for adult-sized windows are open and buffeting occurs, open the front seat belts, the seat belts or the Lower Anchors and Tether for CHildren (LATCH) feature also can be used to hold and rear windows together to minimize the buffeting. infant and child restraint systems.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 WARNING! In an accident, you and your passengers can suffer much greater injuries if you are not properly buckled up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly. of ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In an accident, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and using a seat belt properly. • Wearing a seat belt incorrectly is dangerous.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2 2. The seat belt latch plate is above the back of the front seat, next to your arm in the rear seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” Latch Plate To Buckle WARNING! • A belt buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 WARNING! (Continued) • A shoulder belt placed behind you will not protect you from injury during an accident. You are more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and shoulder belt are meant to be used together. 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A lap belt worn too high can increase the risk of internal injury in an accident. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt will not protect you properly. In a collision, it could even cut into you. Be sure the belt is straight.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 Regular Cab Front Center Three Point Belt 1. The front center seat belt on the Regular Cab may be disconnected to open up utilization of the storage areas behind the front seats. The black latch plate can be detached from the black keyed seat belt buckle located on the inboard side of the passenger seat. Insert the seat belt tongue into the center red slot on the black buckle.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • If the black latch and black buckle are not properly connected when the seat belt is used by an occupant, the seat belt will not be able to provide proper restraint and will increase the risk of injury in an accident. • When reattaching the black latch and black buckle, ensure the seat belt webbing is not twisted.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 WARNING! In Use Position • If the black latch and black buckle are not properly connected when the seat belt is used by an occupant, the seat belt will not be able to provide proper restraint and will increase the risk of injury in an accident. • When reattaching the black latch and black buckle, ensure the seat belt webbing is not twisted.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Adjustable Upper Shoulder Belt Anchorage In the front row outboard seats, the shoulder belt can be adjusted upward or downward to help position the belt away from your neck. Press the button located on the upper belt guide, and then move it up or down to the position that fits you best.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 WARNING! • A lap belt worn too loose or too high is dangerous. • A belt worn too loose can allow you to slip down and under the belt in a collision. • A belt that is too loose or too high will apply crash forces to the abdomen, not to the stronger hip bones. In either case, the risk of internal injuries is greater. Wear a lap belt low and snug. Automatic Locking Retractor (ALR) Mode – If Equipped In this mode, the shoulder belt is automatically prelocked.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual. • Failure to replace the belt and retractor assembly could increase the risk of injury in collisions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 2. Turn the ignition switch to the ON/RUN position and Seat Belts And Pregnant Women We recommend that pregnant women use seat belts wait for the Seat Belt Reminder Light to turn off. throughout their pregnancies. Keeping the mother safe is 3. Within 60 seconds of starting the vehicle, unbuckle the best way to keep the baby safe.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Using a seat belt extender when not needed can increase the risk of injury in an accident. Only use the seat belt extender when the lap belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 The Advanced Front Airbags have a multistage inflator Airbag System Components design. This allows the airbag to have different rates of Your vehicle may be equipped with the following airbag system components: inflation based on the severity and type of collision.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Advanced Front Airbag Features The Advanced Front Airbag system has multistage driver and front passenger (if equipped) airbags. This system provides output appropriate to the severity and type of collision as determined by the Occupant Restraint Controller (ORC). The first stage inflator is triggered immediately during an impact that requires airbag deployment. This low output is used in less severe collisions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Here are some simple steps you can take to minimize the ride properly buckled up in the rear seat. Never allow risk of harm from a deploying airbag: children to slide the shoulder belt behind them or under their arm. Children 12 years old and under should always ride buckled up in a rear seat.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the airbag system in this vehicle needs to be modified Airbag Deployment Sensors And Controls to accommodate a disabled person, contact the Customer Occupant Restraint Controller (ORC) Center. Phone numbers are provided under ⬙If You Need The ORC is part of a Federally regulated safety system Assistance⬙. required for this vehicle. WARNING! • Relying on the airbags alone could lead to more severe injuries in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 vehicle damage — for example, some pole collisions, The ORC contains a backup power supply system that truck underrides, and angle offset collisions. On the other may deploy the airbags even if the battery loses power or hand, depending on the type and location of impact, it becomes disconnected prior to deployment.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignoring the Airbag Warning Light in your instrument panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the airbag system immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 • Flash hazard lights as long as the battery has power or until the ignition key is turned off. • Turn on the interior lights, which remain on as long as the battery has power or until the ignition key is removed. • Unlock the doors automatically. passenger as the airbags deploy and unfold. The abrasions are similar to friction rope burns or those you might get sliding along a carpet or gymnasium floor. They are not caused by contact with chemicals.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Do not drive your vehicle after the airbags have de- Maintaining Your Airbag System ployed. If you are involved in another collision, the WARNING! airbags will not be in place to protect you. WARNING! Deployed airbags cannot protect you in another collision. Have the airbags replaced by an authorized dealer immediately. Also, have the Occupant Restraint Controller (ORC) system serviced as well.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 WARNING! (Continued) • Do not attempt to modify any part of your airbag system. The airbag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any airbag system service. If your seat including your trim cover and cushion needs to be serviced in any way (including removal or loosening/tightening of seat attachment bolts), take the vehicle to your authorized dealer.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Event Data Recorder (EDR) This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Child Restraints Everyone in your vehicle needs to be buckled up all the time, including babies and children. Every state in the United States and all Canadian provinces require that small children ride in proper restraint systems. This is the law, and you can be prosecuted for ignoring it. Children 12 years or younger should ride properly buckled up in a rear seat, if available.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Safety experts recommend that children ride rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). Two types of child restraints can be used rearward-facing: infant carriers and ⬙convertible⬙ child seats. Both types of child restraints are held in the vehicle by the lap/ • shoulder belt. vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 WARNING! • Rearward-facing child seats must never be used in the front seat of a vehicle with a front passenger airbag. An airbag deployment could cause severe injury or death to infants in this position. • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If the belt still can’t be tightened, or if pulling and pushing on the restraint loosens the belt, disconnect the latch plate from the buckle, turn the latch plate around, and insert the latch plate into the buckle again. If you still can’t make the child restraint secure, try a different seating position. • Buckle the child into the seat according to the child restraint manufacturer’s directions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 • Check belt fit periodically. A child’s squirming or slouching can move the belt out of position. If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind their back. Lower Anchors and Tether for CHildren (LATCH) Each vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tether for CHildren.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the seat belt out of the reach of an inquisitive child. Because the lower anchorages are to be introduced to Remind all children in the vehicle that the seat belts are passenger carrying vehicles over a period of years, child not toys and should not be played with, and never leave restraint systems having attachments for those anchoryour child unattended in the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 We urge you to carefully follow the directions of the WARNING! manufacturer when installing your child restraint. Many, but not all, restraint systems will be equipped with Improper installation of a child restraint to the separate straps on each side, with each having a hook or LATCH anchorages can lead to failure of an infant or connector, and a means for adjusting the tension in the child restraint. The child could be badly injured or strap.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To install a child restraint, first, pull enough of the seat belt webbing from the retractor to route it through the belt path of the child restraint and slide the latch plate into the buckle. Next, extract all the seat belt webbing out of the retractor and then allow the belt to retract into the retractor. Finally, pull on any excess webbing to tighten the lap portion around the child restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Tether Anchorage Points at the Right and Center Front Seat (Regular Cab - All Seats) 1. Place the child restraint on the seat and adjust the tether strap so that it will reach over the seat back under the head restraint to the tether anchor directly behind the seat. 2 2. Lift the cover (if so equipped), and attach the hook to the square opening in the sheet metal. 3.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Multiple Child Restraint Installation Sequence (Crew Cab — Rear Seats) Crew Cab 1. The tether straps loops are located between the rear glass and the rear seat. There is a tether strap loop located behind each seating position. You can gain access to the center seating position tether strap loop by raising the head restraint and reaching between the rear glass and rear seat. Head Restraint Adjustment 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 3. Pass each tether strap hook under the head restraint and through the loop of webbing behind the child seat. 4. Route each tether strap to the anchor behind the center seat, and attach the hooks to the anchor loop. 2 5.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Transporting Pets Airbags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly injured, or injure a passenger during panic braking or in an accident. Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts. The engine oil installed in the engine at the factory is a high-quality energy conserving type lubricant.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 WARNING! • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the complete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Floor Mat Safety Information Always use floor mats designed to fit the footwell of your vehicle. Use only floor mats that leave the pedal area unobstructed and that are firmly secured so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways. WARNING! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious personal injury.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Always make sure that objects cannot fall into the driver footwell while the vehicle is moving. Objects can become trapped under the brake pedal and accelerator pedal causing a loss of vehicle control. • If required, mounting posts must be properly installed, if not equipped from the factory.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 ▫ Illuminated Vanity Mirror — If Equipped . . . . 89 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . 83 ▫ “Slide-On-Rod” Features Of Sun Visor — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 ▫ Automatic Dimming Mirror — If Equipped . . . 84 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . . 85 ▫ Outside Mirrors Folding Feature . . . . .
80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Things You Should Know About Your Uconnect™ Phone . . . . . . . . . . . . . . . . . . . . . 111 ▫ General Information . . . . . . . . . . . . . . . . . . 122 䡵 Voice Command — If Equipped . . . . . . . . . . . 122 ▫ Voice Command System Operation . . . . . . . . 122 ▫ Heated Seats — If Equipped . . . . . . . . . . . . 135 ▫ Ventilated Seats — If Equipped . . . . . . . . . . 138 ▫ 40-20-40 Front Bench Seat — If Equipped . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81 ▫ Automatic Headlights . . . . . . . . . . . . . . . . . 146 ▫ Mist Feature . . . . . . . . . . . . . . . . . . . . . . . . 154 ▫ Headlight Delay . . . . . . . . . . . . . . . . . . . . . 147 䡵 Tilt Steering Column . . . . . . . . . . . . . . . . . . . 154 ▫ Parking Lights And Panel Lights . . . . . . . . . 147 䡵 Driver Adjustable Pedals — If Equipped . . . . . 155 ▫ Fog Lights — If Equipped . . . . . . . . . . . . . .
82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Electrical Power Outlets . . . . . . . . . . . . . . . . . 163 䡵 Cigar Lighter And Ash Receiver — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 167 ▫ Center Storage Compartment — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . 174 ▫ Seatback Storage . . . . . . . . . . . . . . . . . . . . . 176 䡵 Power Inverter — If Equipped . . . . . . . . . . . . 168 ▫ Storage (Regular Cab) . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 The mirror should be adjusted with the lever set in the day position (lever flipped toward the windshield). The Inside Day/Night Mirror mirror should be adjusted to center on the view through Headlight glare can be reduced by moving the small the rear window. control lever under the mirror to the night position (lever flipped toward the rear of vehicle).
84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated. The sensor to the right of the button does not illuminate.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 Outside Mirrors To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror. WARNING! Vehicles and other objects seen in a passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object.
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The power mirror controls consist of mirror select butPower Mirrors — If Equipped The controls for the power mirrors are located on the tons and a four-way mirror control switch. driver’s door trim panel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 To adjust a mirror, press the mirror select button for the mirror that you want to adjust. Using the mirror control switch, press on any of the four arrows for the direction that you want the mirror to move. Power Mirror Movement Power Folding Outside Mirrors — If Equipped If equipped with power folding mirrors, they can be electrically folded rearward and unfolded into the drive position.
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The switch for the power folding mirrors is located between the power mirror switches L (left) and R (right). Press the switch once and the mirrors will fold in, pressing the switch a second time will return the mirrors to the normal driving position. Power Folding Mirror Switch NOTE: Ten or more switch activations within one minute will disable the fold/unfold feature to protect the motors from overheating.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 Illuminated Vanity Mirror — If Equipped Illuminated vanity mirrors are located on each sun visor. To use the mirror, rotate the sun visor down and swing the mirror cover upward. The lights will turn on automatically. Closing the mirror cover turns off the light. “Slide-On-Rod” Features Of Sun Visor — If Equipped The sun visor “Slide-On-Rod” feature allows for additional flexibility in positioning the visor to block out the sun.
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To use the “Slide-On-Rod” feature, rotate the sun visor downward and unclip it. Pull the sun visor along the “Slide-On-Rod” until the sun visor is in the desired position. Trailer Towing Mirrors — If Equipped These mirrors are designed with an adjustable mirror head to provide a greater vision range when towing extra-wide loads. To change position inboard or outboard, the mirror head should be rotated (flipped in or out).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 NOTE: Fold the trailer towing mirrors rearward prior to Uconnect™ Phone — IF EQUIPPED Uconnect™ Phone is a voice-activated, hands-free, inentering an automated car wash. vehicle communications system. Uconnect™ Phone alA small blindspot mirror is located next to main mirror lows you to dial a phone number with your mobile and can be adjusted separately. phone using simple voice commands (e.g., “Call” ѧ “Mike” ѧ “Work” or “Dial” ѧ “248-555-1212”).
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • www.jeep.com/uconnect • or call 1–877–855–8400 Uconnect™ Phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. system. Only one linked (or paired) mobile phone can be used with the system at a time. The system is available in English, Spanish, or French languages.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 Voice Command Button Actual button location may vary with the radio. The individual buttons are described in the “Operation” section. Operation Voice commands can be used to operate the Uconnect™ Phone and to navigate through the Uconnect™ Phone menu structure. Voice commands are required after most Uconnect™ Phone prompts.
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE example, you can use the compound form voice command “Phonebook New Entry”, or you can break the compound form command into two voice commands: “Phonebook” and “New Entry”. Please remember, the Uconnect™ Phone works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/meters away from you. Voice Command Tree Refer to “Voice Tree” in this section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 • When prompted, after the beep, say “Pair a Phone” and follow the audible prompts. • You will be asked to say a four-digit Personal Identification Number (PIN), which you will later need to enter into your mobile phone. You can enter any four-digit PIN. You will not need to remember this PIN after the initial pairing process. phone to use if multiple mobile phones are in the vehicle at the same time.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Uconnect™ Phone will confirm the phone number • The Uconnect™ system will confirm the name and and then dial. The number will appear in the display then dial the corresponding phone number, which of certain radios. may appear in the display of certain radios. Call By Saying A Name Add Names To Your Uconnect™ Phonebook • Press the NOTE: Adding names to the Uconnect™ Phonebook is recommended when the vehicle is not in motion. button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 • When prompted, enter the number designation (e.g., “Home”, “Work”, “Mobile”, or “Other”). This will allow you to store multiple numbers for each phonebook entry, if desired. Phonebook Download – Automatic Phonebook Transfer From Mobile Phone If equipped and specifically supported by your phone, Uconnect™ Phone automatically downloads names (text names) and number entries from your mobile phone’s • When prompted, recite the phone number for the phonebook.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Depending on the maximum number of entries downloaded, there may be a short delay before the latest downloaded names can be used. Until then, if available, the previously downloaded phonebook is available for use. Phonebook Download — Single Entry If equipped and supported by your phone, Uconnect™ Phone also allows the user to download entries one at a time from their phone via Bluetooth威. To use this feature, button and say “Phonebook Download.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 first disconnect or drop the Bluetooth威 connection to • You will then be asked for the name of the phonebook the Uconnect™ Phone, and then send the address entry that you wish to edit. book entry via Bluetooth威. Please see your phone • Next, choose the number designation (home, work, Owner’s Manual for specific instructions on how to mobile, or other) that you wish to edit. drop the Bluetooth威 connection.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After you enter the name, the Uconnect™ Phone will ask you which designation you wish to delete: home, NOTE: Editing phonebook entries is recommended work, mobile, other, or all. Say the designation you when the vehicle is not in motion. wish to delete. • Press the button to begin. • Note that only the phonebook entry in the current language is deleted. • After the “Ready” prompt and the following beep, say “Phonebook Delete”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 • Note that only the phonebook in the current language • The Uconnect™ Phone will then prompt you as to the is deleted. number designation you wish to call. • Automatic downloaded phonebook entries cannot be • The selected number will be dialed. deleted or edited. Phone Call Features List All Names In The Uconnect™ Phonebook The following features can be accessed through the Uconnect™ Phone if the feature(s) are available on your button to begin.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE call, press and hold the button until you hear a by the phone number or phonebook entry you wish to single beep, indicating that the incoming call was call. The first call will be on hold while the second call is in progress. To go back to the first call, refer to “Toggling rejected. Between Calls” in this section. To combine two calls, refer Answer Or Reject An Incoming Call — Call to “Conference Call” in this section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 Conference Call When two calls are in progress (one active and one on button until you hear a hold), press and hold the double beep indicating that the two calls have been joined into one conference call. on hold may not become active automatically. This is cell phone-dependent. To bring the call back from hold, press and hold the button until you hear a single beep. Redial • Press the button to begin.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the ignition key is switched to OFF, a call can • After the “Ready” prompt and the following beep, say continue on the Uconnect™ Phone either until the call the name of the language you wish to switch to ends, or until the vehicle battery condition dictates English, Espanol, or Francais. cessation of the call on the Uconnect™ Phone and • Continue to follow the system prompts to complete transfer of the call to the mobile phone. the language selection.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 If the phone is not reachable and the Uconnect™ Phone is • If supported, this number may be programmable on button and operational, you may reach the emergency number as some systems. To do this, press the follows: say “Setup”, followed by “Emergency”. • Press the • The Uconnect™ Phone does slightly lower your chances of successfully making a phone call as to that • After the ⬙Ready⬙ prompt and the following beep, say for the mobile phone directly.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the “Ready” prompt and the following beep, say certain companies, which time out a little too soon to work properly with the Uconnect™ Phone. “Towing Assistance”. NOTE: • The towing assistance number dialed is based on the country where the vehicle is purchased (1-800-5282069 for the U.S., 1-877-213-4525 for Canada, 55-143454 for Mexico City and 1-800-712-3040 for outside Mexico City in Mexico).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 on your mobile phone keypad, you can press the button and say the sequence you wish to enter, followed by the word “Send”. For example, if required to enter your PIN followed with a pound, (3 7 4 6 #), you can button and say, “3 7 4 6 # Send”. Saying press the a number, or sequence of numbers, followed by “Send”, is also to be used for navigating through an automated customer service center menu structure, and to leave a number on a pager.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Press the caution and take precautionary safety measures). By dialing a number with your paired Bluetooth威 mobile • After the “Ready” prompt and the following beep, say phone, the audio will be played through your vehicle’s one of the following: audio system. The Uconnect™ Phone will work the same as if you dial the number using Voice Command. − “Setup Confirmation Prompts On” button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 • Following the beep, say “Mute”. In order to un-mute the Uconnect™ Phone: • Press the button. • Following the beep, say “Mute off”. Connect Or Disconnect Link Between The Uconnect™ Phone And Mobile Phone Your mobile phone can be paired with many different electronic devices, but can only be actively “connected” with one electronic device at a time.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Uconnect™ Phone will play the phone names of • The selected phone will be used for the next phone all paired mobile phones in order from the highest to call. If the selected phone is not available, the the lowest priority. To “select” or “delete” a paired Uconnect™ Phone will return to using the highest button and phone being announced, press the priority phone present in or near (approximately within 30 ft (9 m)) the vehicle. say “Select” or “Delete”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Things You Should Know About Your Uconnect™ Phone Uconnect™ Phone Tutorial To hear a brief tutorial of the system features, press the button and say “Uconnect™ Tutorial.” Voice Training For users experiencing difficulty with the system recognizing their voice commands or numbers, the Uconnect™ Phone Voice Training feature may be used.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Command • fully closed windows, • dry weather condition. • For best performance, adjust the rearview mirror to provide at least 1⁄2 in (1 cm) gap between the overhead • Even though the system is designed for users speaking console (if equipped) and the mirror. in North American English, French, and Spanish ac• Always wait for the beep before speaking. cents, the system may not always work for some.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 • Numbers must be spoken in single digits. “800” must be spoken “eight-zero-zero” not “eight hundred”. • You can say “O” (letter “O”) for “0” (zero). • fully closed windows, • dry weather conditions, and • operation from the driver’s seat.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Send Messages: SMS Uconnect™ Phone can read or send new messages on You can send messages using Uconnect™ Phone. To send a new message: your phone. • Press the button. Read Messages: If you receive a new text message while your phone is • After the “Ready” prompt and the following beep, say connected to Uconnect™ Phone, an announcement will “SMS Send” or “Send Messages.” be made to notify you that you have a new text message.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 3. Where are you? 16. Can this wait? 4. I need more direction. 17. Bye for now 5. L O L 18. When can we meet 6. Why 19. Send number to call 7. I love you 20. Start without me 8. Call me 10. Thanks Turn SMS Incoming Announcement ON/OFF Turning the SMS Incoming Announcement OFF will stop the system from announcing the new incoming messages. 11. See You in 15 minutes • Press the 12.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Bluetooth威 Communication Link Mobile phones have been found to lose connection to the Uconnect™ Phone. When this happens, the connection can generally be reestablished by switching the phone off/on. Your mobile phone is recommended to remain in Bluetooth威 ON mode. Power-Up After switching the ignition key from OFF to either the ON or ACC position, or after a language change, you must wait at least fifteen seconds prior to using the system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 3
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 3
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) Voice Commands Alternate(s) Primary call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 Primary language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) pairing phone book Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call Uconnect™ Tutorial try again voice training work yes 3
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 NOTE: If you do not say a command within a few When using this system, you should speak clearly and at seconds, the system will present you with a list of a normal speaking volume. options. The system will best recognize your speech if the winIf you ever wish to interrupt the system while it lists dows are closed, and the heater/air conditioning fan is button, listen set to low. options, press the Voice Command for the beep, and say your command.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Changing the Volume • “Memo” (to switch to the memo recorder) 1. Start a dialogue by pressing the Voice Command button. • “System Setup” (to switch to system setup) Radio AM (or Radio Long Wave or Radio Medium Wave — If Equipped) 2. Say a command (e.g., “Help”). To switch to the AM band, say “AM” or “Radio AM”. In 3.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 • “Next Station” (to select the next station) • “Menu Radio” (to switch to the radio menu) • “Previous Station” (to select the previous station) • “Main Menu” (to switch to the main menu) • “Menu Radio” (to switch to the radio menu) Disc To switch to the disc mode, say “Disc”.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “New Memo” (to record a new memo) — During the recording, you may press the Voice Command button to stop recording.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 NOTE: Keep in mind that you have to press the Voice SEATS button first and wait for the beep Seats are a part of the Occupant Restraint System of the Command vehicle. before speaking the “Barge In” commands. Voice Training For users experiencing difficulty with the system recognizing their voice commands or numbers the Uconnect™ Voice “Voice Training” feature may be used. button, say “System 1.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Seat Adjuster — If Equipped Both front seats are independently adjustable forward or rearward and are equipped with a seatback recliner. The manual forward or rearward seat adjustment handle is found under the seat cushion at the front edge of each seat. Pull up on the handle and slide the seat forward or backward to move the seat into the most comfortable position, then release the handle to lock the seat into position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust any seat only while the vehicle is parked. Manual Reclining Seats — If Equipped The recliner handle is located on the outside of the seat cushion and is used to adjust the seatback position.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) • Actuating the recliner handle will allow the seatback to swing (dump) forward on manual recliner seats. Do not stand or lean in front of the seat while actuating the handle. The seatback may swing forward and hit you causing injury. This dump feature allows access to the storage bin behind the seat. To avoid injury, place your hand on the seatback and actuate the handle then position the seatback in the desired position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Head Restraints Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact. Head restraints should be adjusted so that the top of the head restraint is located above the top of your ear. Front Head Restraints To raise the head restraint, pull upward on the head restraint.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Head Restraints The outboard head restraints can be adjusted. To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the large button, located on the base of the head restraint, and push downward on the head restraint. NOTE: The rear center head restraint (Crew Cab only) is fixed and cannot be adjusted. Power Seats — If Equipped Some models may be equipped with driver and passenger eight-way power seats.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 move in the direction of the switch. Release the switch when you have reached the desired position. Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the seat switch, the seat will move in the direction of the switch. Release the switch when you have reached the desired position.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seatbelts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seatbelt. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 WARNING! Lumbar Control Switch Heated Seats — If Equipped On some models, the front and rear seats may be equipped with heaters in both the seat cushions and seatbacks. • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Repeated overheating of the seat could damage the heating element and/or degrade the material of the seat. Press the switch once to select HIGHlevel heating. Press the switch a second time to select LOW-level heating. Press the switch a third time to shut the heating elements OFF. Front Heated Seats There are two heated seat switches that allow the driver NOTE: and passenger to operate the seats independently.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 before automatically shutting OFF. The heated seats can indicator lights in each switch indicate the level of heat in shut OFF early or may not turn on when the seat is use. Two indicator lights will illuminate for HIGH, one for LOW and none for OFF. already warm. Vehicle Equipped With Remote Start On models that are equipped with remote start, the driver’s heated seat can be programmed to come on during a remote start.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the switch once to choose HIGH, press it a second time to choose LOW. Pressing the switch a third time will turn the ventilated seat OFF. When HIGH speed is selected both lights on the switch will be illuminated. When LOW speed is selected one light will heat for a maximum of 60 minutes before switching to LOW heat. Once a seat has switched to the LOW heat setting it may operate for a maximum of 45 minutes before automatically shutting OFF.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 40-20-40 Front Bench Seat — If Equipped The seat is divided into three segments. The outboard seat portions are each 40% of the total width of the seat. The back of the center portion (20%) easily folds down to provide an armrest/center storage compartment (if equipped). 3 DRIVER MEMORY SEAT — IF EQUIPPED Driver memory seats allow the driver to recall settings for the adjustable pedals, mirrors, seats and the radio presets using the key fob.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Keyless Entry (RKE) transmitters can also be pro- 2. Adjust the driver’s seat, recliner, and both sideview grammed to recall the same positions when the UN- mirrors to the desired positions. LOCK button is pressed. NOTE: Not all motors may be moved at one time. Refer NOTE: The power lumbar option is not programmable to “Power Seats — If Equipped” in this section for further information. with driver memory seats.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 7. Within five seconds, press and release MEMORY button 1 or 2 on the driver’s seat. The next steps must be performed within 10 seconds if you desire to also use a RKE transmitter to recall memory positions. 8. Turn the ignition OFF and remove the key. To recall the memory settings for driver one, press MEMORY button number 1 on the driver’s seat or the UNLOCK button on the RKE transmitter linked to memory position 1.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: A chime sound may be heard if setting memory vehicles equipped with the Electronic vehicle Information Center (EVIC), refer to “Electronic Vehicle Informawas inhibited for any reason. tion Center (EVIC)/Customer-Programmable Features” To Disable A RKE Transmitter Linked To Memory in “Understanding Your Instrument Panel” for further 1. Turn the ignition switch to the OFF position and information. remove the key. Self-Limiting Control 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Driver Easy Exit And Easy Entry Control This additional feature provides automatic driver’s seat positioning which will enhance driver mobility into and out of the vehicle. The seat cushion will move rearward approximately 2.5 in (60 mm) when the key is removed from the ignition switch. The seat will move forward approximately 2.5 in (60 mm) when the key is placed into the ignition and turned out of the LOCK position.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Reach into the opening beneath the center of the hood and push the safety latch lever from right to left to release it, before raising the hood. CAUTION! To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the front center of the hood to ensure that both latches engage. WARNING! Be sure the hood is fully latched before driving your vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 LIGHTS The headlight switch is located on the left side of the instrument panel, next to the steering wheel. The headlight switch controls the operation of the headlights, parking lights, instrument panel lights, cargo lights and fog lights (if equipped). Your vehicle is equipped with plastic headlight and fog light (if equipped) lenses that are lighter and less susceptible to stone breakage than glass lights.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights To turn on the headlights, rotate the headlight switch clockwise. When the headlight switch is on the parking lights, taillights, license plate light and instrument panel lights are also turned on. To turn off the headlights, rotate the headlight switch back to the O (Off) position. Automatic Headlights This system automatically turns the headlights on or off according to ambient light levels.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 NOTE: The engine must be running before the head- The headlight delay time is programmable on vehicles equipped with an Electronic Vehicle Information Center lights will turn on in the Automatic Mode. (EVIC).
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fog Lights — If Equipped The fog lights are turned on by placing the headlight rotary control in the parking light or headlight position and pushing in the headlight rotary control. Fog Light Switch The fog lights will operate only when the parking lights are on or when the vehicle headlights are on low beam. An indicator light located in the instrument cluster will illuminate when the fog lights are on.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 The brightness of the instrument panel lighting can be regulated by rotating the dimmer control right (brighter) or left (dimmer). When the headlights are on you can supplement the brightness of the odometer, trip odometer, radio and overhead console by rotating the control to the right until you hear a click. This feature is termed the “Parade” mode and is useful when headlights are required during the day.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Light Lights-On Reminder The cargo lights are turned on by pressing on the cargo If the headlights, parking lights, or cargo lights are left on button. after the ignition is turned OFF, a chime will sound when the driver’s door is opened. Battery Saver To protect the life of your vehicle’s battery, load shedding is provided for both the interior and exterior lights.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Daytime Running Lights — If Equipped The headlights on your vehicle will illuminate when the engine is started and the transmission is in any gear except PARK. This provides a constant ⬙Lights ON⬙ condition until the ignition is turned OFF. The lights illuminate at less than 50% of normal intensity. If the parking brake is applied, the Daytime Running Lights (DRL) will turn OFF.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lane Change Assist Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. Flash-To-Pass You can signal another vehicle with your headlights by partially pulling the multifunction lever toward the steering wheel. This will cause the high beam headlights to turn on until the lever is released.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 The delay interval decreases as you rotate the knob until it enters the low continual speed position. The delay can be regulated from a maximum of about 18 seconds between cycles, to a cycle every one second. The delay intervals will double in duration when the vehicle speed is 10 mph (16 km/h) or less.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To prevent freeze-up of your windshield washer system in cold weather, select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers. WARNING! Sudden loss of visibility through the windshield could lead to a collision. You might not see other vehicles or other obstacles.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Pull the lever toward the steering wheel to unlock the steering column. With one hand firmly on the steering wheel, move the steering column up or down, as desired. Release the lever to lock the steering column firmly in place. Tilt Steering Lever WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The adjustable pedal switch is located to the left side of the steering column. on vehicles equipped with the Electronic Vehicle Information System (EVIC) if the pedals are attempted to be adjusted when the system is locked out (“Adjustable Pedal Disabled — Cruise Control Engaged” or “Adjustable Pedal Disabled — Vehicle In Reverse”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 HEATED STEERING WHEEL — IF EQUIPPED The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on it will operate for approximately 58 to 70 minutes before automatically shutting off. The heated steering wheel can shut off early or may not turn on when the steering wheel is already warm.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Do not place anything on the steering wheel that insulates against heat, such as a blanket or cushion. This may cause the steering wheel heater to overheat. ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, Electronic Speed Control takes over the accelerator operation at speeds greater than 25 mph (40 km/h). The Electronic Speed Control lever is located on the right side of the steering wheel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 NOTE: In order to ensure proper operation, the Electronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Deactivating Electronic Speed Control A soft tap on the brake pedal or pulling the Electronic Speed Control lever (CANCEL) toward you will deactivate the Electronic Speed Control without erasing the set speed memory. Pushing the ON/OFF button to the OFF position or turning OFF the ignition erases the set speed memory. To Resume Speed To resume a previously set speed, raise the Electronic Speed Control lever (RESUME ACCEL) upwards and release.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 To Accelerate For Passing Press the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed. NOTE: The Electronic Speed Control system maintains speed up and down hills. A slight speed change on moderate hills is normal. WARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Power Sliding Rear Window Switch — If Equipped UNLOCK button is pressed on the Remote Keyless Entry (RKE) transmitter, if equipped. These lights are also operated individually as reading lights by pressing on the corresponding lens.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 ELECTRICAL POWER OUTLETS The auxiliary 12 Volt (13 Amp) power outlets can provide power for in-cab accessories designed for use with the standard “cigar lighter” plug. The 12 Volt power outlets have a cap attached to the outlet indicating “12V DC”, together with either a key symbol or a battery symbol. A key symbol indicates that the key must be in the ON or ACC positions for the outlet to provide power.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. • Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlets as this will damage the outlet and blow the fuse. Improper use of the power outlet can cause damage not covered by your warranty.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 • Inside the upper lid of the center storage compartment • Rear of the center console storage compartment — — if equipped. Crew Cab.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The key symbol indicates that this outlet can supply power when the key is in the ON or ACC positions. All accessories connected to the outlet(s) should be removed or turned off when the vehicle is not in use to protect the battery against discharge.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.), will discharge the battery even more quickly.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For vehicles equipped with a floor console the cuphold- To avoid overloading the circuit, check the power ratings on electrical devices prior to using the inverter. ers may be used. POWER INVERTER — IF EQUIPPED A 115 Volt (150 Watts Maximum) outlet is located on the center stack of the instrument panel, to the right of the radio. This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 Watts.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 The power inverter switch is located on the switch bank below the Climate Controls. To turn on the power outlet, press the switch once. Press the switch a second time to turn the power outlet off. NOTE: • When the power inverter switch is pressed, there will be a delay of approximately one second before the power inverter status indicator turns on. The status indicator of the AC power inverter indicates whether the inverter is producing AC power.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS Front Instrument Panel Cupholders — (40–20–40 Seats) The cupholders are located in the pull-out tray on the center stack of the instrument panel. Front Instrument Panel Cupholders — Floor Storage Bin For vehicles equipped with bucket seats two cupholders are located in the floor storage bin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Rear Cupholder — Crew Cab STORAGE Crew Cab vehicles are equipped with rear cupholders Glove Box Storage The glove box is located on the passenger side of the located in the center armrest. instrument panel and features both an upper (if equipped) and lower storage area.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open the upper glove box push upward on the handle To open the lower glove box, pull on the handle to release release. The glove box door will automatically open. the latch and lower the door.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 Door Storage Front Door Storage — If Equipped Storage areas and bottle holders (drivers side only) are located in the door trim panels. Rear Door Storage — Crew Cab Storage compartments are located in both the driver and passenger door trim panels.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Center Storage Compartment — If Equipped The center storage compartment is located between the driver and passenger seats. The storage compartment provides an armrest and contains both and upper and lower storage area. Center Storage Compartment WARNING! • This armrest is not a seat. Anyone seated on the armrest could be seriously injured during vehicle operation, or a collision. Only use the center seating position when the armrest is fully upright.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 Pull on the upper handle on the front of the armrest to With the upper lid closed, pull on the lower handle to raise the cover. The upper storage area contains a 12 Volt open the lower storage bin. power outlet that can be used to power small electrical devices, refer to “Electrical Power Outlets” for further information.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not operate this vehicle with a console compartment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distraction, resulting in death or injury. Seatback Storage Located in the back of both the driver and passenger front seats are pockets that can be used for storage.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 3 Storage Bin Storage and Seats (Crew Cab) The Crew Cab models provide additional storage under the rear seats. Lift the seats to access the storage compartment. To open the storage compartments, lift upward on the handle of the latch and open the lid. Crew Cab Storage CAUTION! Always lift the storage compartment lids by using the handle. Failure to lift the lids by using the handle can result in damage to the lids.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Plastic Grocery Bag Retainers (Regular Cab REAR WINDOW FEATURES Models) Rear Window Defroster Retainer hooks which will hold plastic grocery bag The rear window defroster button is located on the handles are built into the back panel of the cab, behind climate control panel. Press this button to turn on the seats. the rear window defroster and the heated outside mirrors (if equipped).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Sliding Rear Window — If Equipped A locking device in the center of the window helps to prevent entry from the rear of the vehicle. Squeeze the lock to release the window.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . 184 ▫ Trip Functions . . . . . . . . . . . . . . . . . . . . . . 209 䡵 Instrument Cluster — Base . . . . . . . . . . . . . . . 185 ▫ Vehicle Info (Customer Information Features) . . . . . . . . . 210 䡵 Instrument Cluster — Premium . . . . . . . . . . . 186 䡵 Instrument Cluster Descriptions . . . . . . . . . . . 187 䡵 Electronic Vehicle Information Center (EVIC) — If Equipped . . . . . . . . . . . . . .
182 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Operating Instructions (Voice Command System) — If Equipped . . . . . . . . . . . . . . . . 219 ▫ Operating Instructions (Uconnect™ Phone) — If Equipped . . . . . . . . . . . . . . . . . . . . . . 219 䡵 Media Center 130 (Sales Code RES) . . . . . . . . . 219 ▫ Operating Instructions — Radio Mode . . . . . 220 ▫ Operation Instructions — CD Mode For CD And MP3 Audio Play . . . . . . . . . . . . . . . . . 223 ▫ Notes On Playing MP3 Files . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 183 ▫ System Activation . . . . . . . . . . . . . . . . . . . . 250 䡵 CD/DVD Disc Maintenance . . . . . . . . . . . . . . 255 ▫ Electronic Serial Number/Sirius Identification Number (ESN/SID) . . . . . . . . . 250 䡵 Radio Operation And Mobile Phones ▫ Selecting Uconnect™ Multimedia (Satellite) Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251 ▫ Satellite Antenna . . . . . . . . . . . . . . . . . . . . . 251 ▫ Reception Quality . . . . . . . . . . . .
184 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 2 3 4 5 6 — — — — — — Headlight Switch Instrument Cluster Radio Upper Switch Bank Upper Glove Compartment Lower Glove Compartment 7 — 115v Power Inverter Outlet 8 — Power Outlet 9 — Lower Switch Bank 10 — Cup Holders 11 — Climate Controls 12 — Power Outlet/Cigar Lighter 13 14 15 16 — — — — Transfer Case Position Switch Ignition Switch Hood Release Parking Brake Release
UNDERSTANDING YOUR INSTRUMENT PANEL 185 INSTRUMENT CLUSTER — BASE 4
186 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — PREMIUM
UNDERSTANDING YOUR INSTRUMENT PANEL 187 INSTRUMENT CLUSTER DESCRIPTIONS • Check for an inoperative outside light bulb if either indicator flashes at a rapid rate. 1. Tachometer The Tachometer indicates engine speed in revolutions per 3. Fuel Gauge minute (RPM x 1000). Shows level of fuel in tank when ignition switch is in the ON/RUN position. CAUTION! Do not operate the engine with the tachometer pointer at high RPM for extended periods. Engine damage may occur. 4.
188 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! WARNING! Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H” and you hear continuous chimes, turn the engine off immediately and call an authorized dealership for service. A hot engine cooling system is dangerous.
UNDERSTANDING YOUR INSTRUMENT PANEL 189 rotate at the same speed. Low range provides a greater required and you may experience reduced performance, gear reduction ratio to provide increased torque at the an elevated/rough idle or engine stall and your vehicle may require towing. wheels. 7. Electronic Throttle Control (ETC) Light This light informs you of a problem with the Electronic Throttle Control (ETC) system.
190 UNDERSTANDING YOUR INSTRUMENT PANEL For vehicles equipped with a premium cluster this indi- lubrication system malfunction. Immediate service cator will display in the Electronic Vehicle Information should be obtained from an authorized dealer. Center (EVIC). Refer to ”Electronic Vehicle Information 13. Odometer/Trip Odometer Button Center (EVIC) — If Equipped” for further information. Press this button to toggle between the odometer and the trip odometer display. Holding the button in resets the 10.
UNDERSTANDING YOUR INSTRUMENT PANEL 191 mileage was before the repair or service. It is a good idea for you to make a record of the odometer reading before the repair/service, so that you can be sure that it is properly reset, or that the door jamb sticker is accurate if the odometer must be reset at zero. NOTE: There is also an engine hour function. This indicates the total number of hours the engine has been running.
192 UNDERSTANDING YOUR INSTRUMENT PANEL If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a loose gascap indicator Loose will display in the odometer display area. Gascap Tighten the fuel filler cap properly and press Indicator the TRIP button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. CHAngE OIL Your vehicle is equipped with an engine oil change indicator system.
UNDERSTANDING YOUR INSTRUMENT PANEL 193 2. Fully depress the accelerator pedal slowly three shift the transmission into NEUTRAL and idle the vehicle. If the temperature reading does not return to times within 10 seconds. normal, turn the engine off immediately and call for 3. Turn the ignition switch to the OFF/LOCK position. service. Refer to “If Your Engine Overheats” in “What To NOTE: If the indicator message illuminates when you Do In Emergencies” for further information.
194 UNDERSTANDING YOUR INSTRUMENT PANEL lever to activate ERS. Refer to “Automatic Transmission” 19. Voltmeter — If Equipped in “Starting And Operating” for further information. When the engine is running, the gauge indicates the electrical system voltage. The pointer should stay within 17. Low Fuel Light the normal range if the battery is charged. If the pointer When the fuel level reaches approximately 3.0 gal moves to either extreme left or right and remains there (11.
UNDERSTANDING YOUR INSTRUMENT PANEL 195 to the brake booster, the ABS pump will run when 20. Cargo Light The cargo light will illuminate when the cargo applying the brake and a brake pedal pulsation may be light is activated by pressing the cargo light felt during each stop. button on the headlight switch. The dual brake system provides a reserve braking capacity in the event of a failure to a portion of the hydraulic 21. Brake Warning Light system.
196 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. You could have a collision. Have the vehicle checked immediately. The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN position. NOTE: This light shows only that the parking brake is applied. It does not show the degree of brake application. 22.
UNDERSTANDING YOUR INSTRUMENT PANEL 197 Center (EVIC). Refer to ”Electronic Vehicle Information Although your vehicle will usually be drivable and not Center (EVIC) — If Equipped” for further information. need towing, see your authorized dealer for service as soon as possible. 23.
198 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants, wood, cardboard, etc. This could result in death or serious injury to the driver, occupants or others. 24.
UNDERSTANDING YOUR INSTRUMENT PANEL 199 27. Transmission Temperature Warning Light WARNING! This light indicates that there is excessive transmission fluid temperature that might occur If the Transmission Temperature Warning Light is with severe usage such as trailer towing.
200 UNDERSTANDING YOUR INSTRUMENT PANEL 28. Seat Belt Reminder Light When the ignition switch is first turned to ON/ RUN, this light will turn on for four to eight seconds as a bulb check. During the bulb check, if the driver’s seat belt is unbuckled, a chime will sound. After the bulb check or when driving, if the driver’s seat belt remains unbuckled, the seat belt reminder light will flash or remain on continuously.
UNDERSTANDING YOUR INSTRUMENT PANEL 201 ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED The Electronic Vehicle Information Center (EVIC) features a driver-interactive display that is located in the instrument cluster. NOTE: The compass on your vehicle is self-calibrating, eliminating the need to manually calibrate the compass. This system conveniently allows the driver to select a variety of useful information by pressing the switches mounted on the steering wheel.
202 UNDERSTANDING YOUR INSTRUMENT PANEL • Audio Modes display Steering wheel EVIC control button, as it appears on the left side of the steering wheel. Press and release the UP button to scroll upward through the main menus (DTE, mi/gal, System Info, Messages, Units, Setup) and submenus. Press and release the DOWN button to scroll downward through the main menus and submenus. Steering wheel EVIC control button as it appears on the right side of the steering wheel.
UNDERSTANDING YOUR INSTRUMENT PANEL 203 Electronic Vehicle Information Center (EVIC) • Check Trailer Brake Wiring Displays • Service Trailer Brake System When the appropriate conditions exist, the EVIC displays the following messages: • Trailer Brake Connected • Left front turn signal lamp out • Trailer Brake Disconnected • Right front turn signal lamp out • Lights On • Left rear turn signal lamp out • Keyfob Battery Low • Right rear turn signal lamp out • ECO (Fuel Saver Indicator) — If Equipped •
204 UNDERSTANDING YOUR INSTRUMENT PANEL • Turn Signal On • Trailer Brake (with icon and voltage readout) • RKE Battery Low • Personal Settings Not Available — Vehicle Not in Park • LOW WASHER FLUID • Remote start aborted — Door ajar • Oil Change Due > Dealer Info • Remote start aborted — Hood ajar • Park Assist On • Remote start aborted — Fuel low • Park Assist Off • Remote start disabled — System fault • Warning Object Detected • Remote start disabled — Turn key • Left Front Turn Signal Ligh
UNDERSTANDING YOUR INSTRUMENT PANEL 205 • Memory System Unavailable — Seatbelt Buckled • Memory 1 Profile Recall • Memory 2 Profile Recall • Adjustable Pedals Unavailable — Vehicle in Reverse • Adjustable Pedals Unavailable — Cruise Engaged is started. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound for four minutes when this light turns on. Do not operate the vehicle until the cause is corrected.
206 UNDERSTANDING YOUR INSTRUMENT PANEL If the light remains lit with the engine running, your • Electronic Speed Control Light This light will turn on when the electronic vehicle will usually be drivable. However, see an authorized dealer for service as soon as possible. If the light is speed control is ON. flashing when the engine is running, immediate service is required.
UNDERSTANDING YOUR INSTRUMENT PANEL 207 If the light turns on while driving, safely pull over and stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the vehicle. If the temperature reading does not return to normal, turn the engine off immediately and call for service. Refer to “If Your Engine Overheats” in “What To Do In Emergencies” for more information. torque converter slip condition, such as 4-wheel-drive operation (e.g.
208 UNDERSTANDING YOUR INSTRUMENT PANEL • Loose Gascap Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a loose gascap icon will display in the telltale display area. Tighten the fuel filler cap properly and press the SELECT button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started.
UNDERSTANDING YOUR INSTRUMENT PANEL 209 Distance To Empty (DTE) EVIC Average Fuel Economy Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. DTE cannot be reset through the RETURN button. Shows the average fuel economy since the last reset.
210 UNDERSTANDING YOUR INSTRUMENT PANEL The Trip Functions mode displays the following informa- To Reset The Display Reset will only occur while a resettable function is being tion: displayed. Press and release the ODOMETER/TRIP • Trip A ODOMETER button once to clear the resettable function Shows the total distance traveled for Trip A since the last being displayed. reset.
UNDERSTANDING YOUR INSTRUMENT PANEL 211 • Trans Temperature Displays the actual transmission temperature. • Engine Hours Displays the number of hours of engine operation. Compass / Temperature Display The compass readings indicate the direction the vehicle is facing. The EVIC will display one of eight compass readings and the outside temperature.
212 UNDERSTANDING YOUR INSTRUMENT PANEL temperature sensor caused by the snowplow. In addition, on vehicles equipped with Automatic Temperature Control (ATC), it is suggested that the interior cabin temperature be manually controlled should the system not perform as desired while in automatic mode. Both the outside temperature display and ATC operation will return to normal when the snowplow is removed.
UNDERSTANDING YOUR INSTRUMENT PANEL 213 5. Complete one or more 360–degree turns (in an area free from large metal or metallic objects) until the “CAL” indicator turns off. The compass will now function normally. Compass Variance Compass Variance is the difference between Magnetic North and Geographic North. To compensate for the differences the variance should be set for the zone where the vehicle is driven, per the zone map.
214 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Press the DOWN button until the “Compass Variance” Use the UP or DOWN button to display one of the message is displayed in the EVIC, then press the SELECT following choices. button. The last variance zone number displays in the Select Language EVIC. When in this display you may select one of five lan4. Press and release the SELECT button until the proper guages for all display nomenclature, including the trip functions and the navigation system (if equipped).
UNDERSTANDING YOUR INSTRUMENT PANEL 215 the feature showing the system has been activated or the feature showing the system has been activated, or the check-mark is removed showing the system has been check-mark is removed showing the system has been deactivated. deactivated. Auto Lock Doors When this feature is selected, all doors will lock automatically when the vehicle reaches a speed of 15 mph (24 km/h).
216 UNDERSTANDING YOUR INSTRUMENT PANEL when the Remote Keyless Entry (RKE) transmitter UNLOCK button is pressed. If this feature is not selected then the memory seat, mirror, and radio settings can only return to the memory set position using the seat mounted switch. To make your selection, press and release the SELECT button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated.
UNDERSTANDING YOUR INSTRUMENT PANEL 217 Headlamp Off Delay When this feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle. To make your selection, scroll up or down until the preferred setting is highlighted, then press and release the SELECT button until a checkmark appears next to the setting, showing that the setting has been selected.
218 UNDERSTANDING YOUR INSTRUMENT PANEL Easy Exit Seat — If Equipped This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. To make your selection, press and release the SELECT button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated.
UNDERSTANDING YOUR INSTRUMENT PANEL 219 Calibrate Compass Refer to “Compass Display” for more information. MEDIA CENTER 730N/430/430N (RHR/RER/RBZ/ RHB) CD/DVD/HDD/NAV — IF EQUIPPED MEDIA CENTER 130 (SALES CODE RES) NOTE: The radio sales code is located on the lower right side of the radio faceplate. NOTE: The sales code is located on the lower right side of the unit’s faceplate. 4 Refer to your Uconnect™ Multimedia RHR, RER, RBZ or RHB user’s manual for detailed operating instructions.
220 UNDERSTANDING YOUR INSTRUMENT PANEL to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make NOTE: The ignition switch must be in the ON or ACC another selection. Holding either button will bypass position to operate the radio. stations without stopping, until you release it. Power Switch/Volume Control (Rotary) TIME Button Push the ON/VOLUME control knob to turn on the Press the TIME button to alternate display of the time radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 221 4. Adjust the minutes using the right side TUNE/ Push the rotary TUNE/SCROLL control knob a second SCROLL control knob. Press the TUNE/SCROLL control time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the knob to save time change. mid-range tones. 5. To exit, press any button/knob, or wait five seconds. Push the rotary TUNE/SCROLL control knob a third RW/FF time and TREBLE will display.
222 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob again to SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory. exit setting tone, balance, and fade. The stations stored in SET 2 memory can be selected by AM/FM Button pressing the pushbutton twice. Press the buttons to select either AM or FM mode. Every time a preset button is used, a corresponding SET/RND Button — To Set the Pushbutton button number will display.
UNDERSTANDING YOUR INSTRUMENT PANEL 223 If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and • The ignition switch must be in the ON or ACC seconds. Play will begin at the start of track 1. position to operate the radio.
224 UNDERSTANDING YOUR INSTRUMENT PANEL EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD and MP3 modes. TIME Button Press this button to change the display from a large CD If you have ejected a disc and have not removed it within playing time display to a small CD playing time display. 10 seconds, it will be reloaded.
UNDERSTANDING YOUR INSTRUMENT PANEL 225 SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play. This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension.
226 UNDERSTANDING YOUR INSTRUMENT PANEL exceeding 20 folders will result in this display. With Supported MP3 File Formats 200 files, exceeding 50 folders will result in this The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 display.) extension may cause playback problems. The radio is • Maximum number of characters in file/folder names: designed to recognize the file as an invalid MP3 and will • Level 1: 12 (including a separator ⬙.
UNDERSTANDING YOUR INSTRUMENT PANEL 227 MPEG Specification MPEG-1 Audio Layer 3 MPEG-2 Audio Layer 3 Sampling Bit Rate (kbps) Frequency (kHz) 320, 256, 224, 192, 160, 128, 48, 44.1, 32 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 24, 22.05, 16 56, 48, 40, 32, 24, 16, 8 Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium.
228 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player, or cassette player, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. MEDIA CENTER 130 WITH SATELLITE RADIO (SALES CODE RES+RSC) NOTE: The radio sales code is located on the lower right side of the radio faceplate.
UNDERSTANDING YOUR INSTRUMENT PANEL 229 to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make NOTE: The ignition switch must be in the ON or ACC another selection. Holding either button will bypass position to operate the radio. stations without stopping until you release it.
230 UNDERSTANDING YOUR INSTRUMENT PANEL 3. After adjusting the hours, press the right side TUNE/ Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone feature SCROLL control knob to set the minutes. The minutes (if equipped). Refer to “Uconnect™ Phone” in “Under- will begin to blink. standing The Features If Your Vehicle”. 4. Adjust the minutes using the right side TUNE/ If your vehicle is not equipped with or this feature is not SCROLL control knob.
UNDERSTANDING YOUR INSTRUMENT PANEL 231 INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio Text message broadcast from an FM station (FM mode only). Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the mid-range tones.
232 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob again to exit setting tone, balance, and fade. MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information.
UNDERSTANDING YOUR INSTRUMENT PANEL 233 • Set Clock — Pressing the SELECT button will allow you to set the clock. Adjust the hours by turning the TUNE/SCROLL control knob. After adjusting the hours, press the TUNE/SCROLL control knob to set the minutes. The minutes will begin to blink. Adjust the minutes using the right side TUNE/SCROLL control knob. Press the TUNE/SCROLL control knob to save time change.
234 UNDERSTANDING YOUR INSTRUMENT PANEL not selected within five seconds after pressing the SET/ DISC/AUX Button RND button, the station will continue to play but will not Pressing the DISC/AUX button will allow you to switch from AM/FM modes to DISC/AUX mode. be stored into pushbutton memory. You may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET/RND button twice and SET 2 will show in the display window.
UNDERSTANDING YOUR INSTRUMENT PANEL 235 radio display. If a CD does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and must be ejected before a new disc can be loaded. CAUTION! (Continued) • RES is a single CD player. Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player.
236 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Button Press the right SEEK button for the next selection on the CD. Press the left SEEK button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first second of the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD and MP3 modes.
UNDERSTANDING YOUR INSTRUMENT PANEL 237 exceeding 20 folders will result in this display. With Supported Medium Formats (File Systems) 200 files, exceeding 50 folders will result in this The medium formats supported by the radio are ISO 9660 display.) Level 1 and Level 2 and includes the Joliet extension. When reading discs recorded using formats other than • Maximum number of characters in file/folder names: ISO 9660 Level 1 and Level 2, the radio may fail to read • Level 1: 12 (including a separator ⬙.
238 UNDERSTANDING YOUR INSTRUMENT PANEL Supported MP3 File Formats The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. MPEG Specification MPEG-1 Audio Layer 3 Sampling Bit Rate (kbps) Frequency (kHz) 320, 256, 224, 192, 160, 128, 48, 44.1, 32 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 24, 22.
UNDERSTANDING YOUR INSTRUMENT PANEL 239 Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob.
240 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds to return to ⬙elapsed time⬙ display. Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3 player or cassette player and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. TIME Button (Auxiliary Mode) Press this button to change the display to time of day.
UNDERSTANDING YOUR INSTRUMENT PANEL 241 radio system in your vehicle. Sirius will supply a welcome kit that contains general information, including how to setup your on-line listening account. For further information, call the toll-free number 888-539-7474, or visit the Sirius web site at www.sirius.com, or at www.siriuscanada.ca for Canadian residents. using the TUNE/SCROLL control knob until Sirius ID is selected. Press the TUNE/SCROLL control knob and the Sirius ID number will display.
242 UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality SEEK Buttons Satellite reception may be interrupted due to one of the Press and release the SEEK buttons to search for the next following reasons: channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will • The vehicle is parked in an underground parking remain tuned to the new channel until you make another structure or under a physical obstacle. selection.
UNDERSTANDING YOUR INSTRUMENT PANEL 243 additional three seconds will make the radio display the Toggle the MUSIC TYPE button again to select the music Song Title all of the time (press and hold again to return type. to normal display). By pressing the SEEK button when the Music Type function is active, the radio will be tuned to the next RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons channel with the same selected Music Type name.
244 UNDERSTANDING YOUR INSTRUMENT PANEL SET Button – To Set the Pushbutton Memory When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button. The symbol SET 1 will now show in the display window. Select the button (1-6) you wish to lock onto this channel and press and release that button. If a button is not selected within five seconds after pressing the SET button, the channel will continue to play but will not be stored into pushbutton memory.
UNDERSTANDING YOUR INSTRUMENT PANEL 245 This feature allows an iPod威 to be plugged into the the glove compartment on some vehicles). Once the vehicle’s sound system through a 16–pin connector, using iPod威 is connected and synchronized to the vehicle’s iPod威 control system (iPod威 may take a few seconds to the provided interface cable. connect), the iPod威 starts charging and is ready for use iPod威 control supports Mini, 4G, Photo, Nano, 5G iPod威 by pressing radio switches, as described below.
246 UNDERSTANDING YOUR INSTRUMENT PANEL • The iPod威 audio can be played on the vehicle’s sound Play Mode system, providing metadata (artist, track title, album, When switched to iPod威 control mode, the iPod威 automatically starts Play mode. In Play mode, use the followetc.) information on the radio display. ing buttons on the radio faceplate to control the iPod威 • The iPod威 can be controlled using the radio buttons to and display data: Play, Browse, and List the iPod威 contents.
UNDERSTANDING YOUR INSTRUMENT PANEL 247 • Jump backward in the current track by pressing and • While a track is playing, press the INFO button to see holding the << RW button. Holding the << RW the associated metadata (artist, track title, album, etc.) button long enough will jump to the beginning of for that track. Pressing the INFO button again jumps the current track. to the next screen of data for that track.
248 UNDERSTANDING YOUR INSTRUMENT PANEL Shuffle OFF modes for the iPod威. If the RND icon is showing on the radio display, then the shuffle mode is ON. fast will scroll through the list faster. During fast scroll, a slight delay in updating the information on the radio display may be noticed. List Or Browse Mode During Play mode, pressing any of the buttons described below, will bring up List mode. List mode enables scrolling through the list of menus and tracks on the iPod威.
UNDERSTANDING YOUR INSTRUMENT PANEL 249 • Pressing a PRESET button will display the current list on the top line and the first item in that list on the second line. • To Exit List mode without selecting a track, press the same PRESET button again to go back to Play mode. • LIST button: The LIST button will display the top level menu of the iPod威. Turn the TUNE control knob to list the top-menu item to be selected and press the TUNE control knob.
250 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect™ Multimedia (SATELLITE RADIO) — IF EQUIPPED (REN/RER/RES RADIOS ONLY) Satellite radio uses direct satellite-to-receiver broadcasting technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Radio. This service offers over 130 channels of music, sports, news, entertainment, and programming for children, directly from its satellites and broadcasting studios.
UNDERSTANDING YOUR INSTRUMENT PANEL 251 Sirius ID number will display. The Sirius ID number bikes should be placed as far rearward as possible, within display will time out in two minutes. Press any button on the loading design of the rack. Do not place items directly on or above the antenna. the radio to exit this screen. ESN/SID Access With REN/RER Radios Reception Quality While in SAT mode, press the MENU button on the radio Satellite reception may be interrupted due to one of the faceplate.
252 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button Pressing the INFO button will cycle the display information between Artist, Song Title, and Composer (if availNOTE: The ignition switch must be in the ON or ACC able). Also, pressing and holding the INFO button for an position to operate the radio. additional three seconds will make the radio display the SEEK Buttons Song Title all of the time (press and hold again to return Press and release the SEEK buttons to search for the next to normal display).
UNDERSTANDING YOUR INSTRUMENT PANEL 253 or turning the TUNE/SCROLL control knob within five • Display Sirius ID number — Press the AUDIO/ seconds will allow the program format type to be seSELECT button to display the Sirius ID number. This lected. number is used to activate, deactivate, or change the Sirius subscription. Toggle the MUSIC TYPE button again to select the music SET Button – To Set the Pushbutton Memory type.
254 UNDERSTANDING YOUR INSTRUMENT PANEL pushbutton memory. The channels stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 These buttons tune the radio to the channels that you commit to pushbutton memory (12 Satellite stations). Operating Instructions - Uconnect™ Phone (If Equipped) Refer to “Uconnect™ Phone” in “Understanding The Features Of Your Vehicle”.
UNDERSTANDING YOUR INSTRUMENT PANEL 255 The button located in the center of the right hand control CD Player will switch modes to Radio, CD or other valid audio Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom of the switch once source. will go to the beginning of the current track or to the The left hand control is a rocker type switch with a beginning of the previous track if it is within one second pushbutton in the center.
256 UNDERSTANDING YOUR INSTRUMENT PANEL 2. If the disc is stained, clean the surface with a soft cloth, RADIO OPERATION AND MOBILE PHONES Under certain conditions, the mobile phone being on in wiping from center to edge. your vehicle can cause erratic or noisy performance from 3. Do not apply paper or tape to the disc; avoid scratchyour radio. This condition may be lessened or eliminated ing the disc. by relocating the mobile phone antenna. This condition is 4.
UNDERSTANDING YOUR INSTRUMENT PANEL 257 higher temperatures than the outside ambient temperature. The higher displayed temperature is due to blocked or reduced airflow to the underhood ambient temperature sensor caused by the snowplow. In addition, on vehicles equipped with Automatic Temperature Control (ATC), it is suggested that the interior cabin temperature be manually controlled should the system not perform as desired while in automatic mode.
258 UNDERSTANDING YOUR INSTRUMENT PANEL Front Blower Control There are four blower speeds. Use this control to regulate the amount of air forced through the system in any mode you select. The blower speed increases as you move the control clockwise from the OFF position. temperatures. Rotating the knob clockwise, into the red area, indicates warmer temperatures.
UNDERSTANDING YOUR INSTRUMENT PANEL 259 Panel Mode Mix Mode Air is directed through the outlets in the instrument Air is directed through the floor, defrost and side panel. These outlets can be adjusted to direct airflow. window demist outlets. This setting works best in cold or snowy conditions that require extra heat at Bi-Level Mode the windshield. This setting is good for maintaining Air is directed through the panel and floor outlets. comfort, while reducing moisture on the windshield.
260 UNDERSTANDING YOUR INSTRUMENT PANEL Recirculation Control Press this button to choose between outside air intake or recirculation of the air inside the vehicle. A LED will illuminate when you are in Recirculation mode. Only use the Recirculation mode to temporarily block out any outside odors, smoke, or dust, and to cool the interior rapidly upon initial start-up in very hot or humid weather.
UNDERSTANDING YOUR INSTRUMENT PANEL 261 Economy Mode MAX A/C If ECONOMY mode is desired, press the A/C button to turn off the LED indicator and the A/C compressor. Rotate the temperature control knob to the desired temperature. For maximum cooling, when MAX A/C is selected the A/C is turned on automatically and the air is recirculated. Air Conditioning Operation Push this button to engage the Air Conditioning (A/C).
262 UNDERSTANDING YOUR INSTRUMENT PANEL • When occupants in the vehicle select an Auto mode operation, Auto blower operation is set by using rotary knobs on the control unit and a comfort temperature setting by using the temperature up and down buttons. • The system provides set-and-forget operation for optimum comfort and convenience. • The system can be controlled manually, if desired.
UNDERSTANDING YOUR INSTRUMENT PANEL 263 Automatic Operation the temperature, mode and fan speed to provide comfort as quickly as possible. 1. Position the MODE control knob to the Auto position • The temperature can be displayed in U.S. or Metric on the Automatic Temperature Control (ATC) Panel. units by selecting the US/M customer-programmable 2. Position the BLOWER control knob in the Auto posifeature. Refer to the “Electronic Vehicle Information tion on the ATC Panel.
264 UNDERSTANDING YOUR INSTRUMENT PANEL selected. This allows the front occupants to control the Manual Operation This system offers a full complement of manual override volume of air circulated in the vehicle and cancel the Auto mode. features. NOTE: Each of these features operate independently The operator can also select the direction of the airflow from each other. If any one feature is controlled manually, by selecting one of the following positions.
UNDERSTANDING YOUR INSTRUMENT PANEL 265 The Air Conditioning (A/C) button allows the Floor Mode Air comes from the floor outlets. A slight amount of operator to manually activate or deactivate the air conditioning system. When in A/C mode and the air is directed through the defrost and side window ATC is set to a cool temperature, dehumidified air flows demister outlets. through the air outlets.
266 UNDERSTANDING YOUR INSTRUMENT PANEL Recirculation mode should only be used temporarily. The recirculation LED will illuminate on the blower control knob when this button is selected. Push the button a second time to turn off the Recirculation mode LED and allow outside air into the vehicle. Summer Operation The engine cooling system in air conditioned vehicles must be protected with a high-quality antifreeze coolant to provide proper corrosion protection and to protect against engine overheating.
UNDERSTANDING YOUR INSTRUMENT PANEL 267 Vacation/Storage Any time you store your vehicle or keep it out of service (i.e., vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in fresh air with the blower setting in high. This will ensure adequate system lubrication to minimize the possibility of compressor damage when the system is started again. Window Fogging and Frosting Vehicle windows tend to fog on the inside of the glass in mild, rainy and/or humid weather.
268 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Tips
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 273 ▫ Key Ignition Park Interlock . . . . . . . . . . . . . 277 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . 273 ▫ Brake/Transmission Shift Interlock System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277 ▫ Automatic Transmission . . . . . . . . . . . . . . . 273 ▫ Extreme Cold Weather (Below –20°F Or ⫺29°C) . . . . . . . . . . . . . . . 274 ▫ If Engine Fails To Start . . . . . . . .
270 STARTING AND OPERATING ▫ Transfer Case Position Indicator Light . . . . . . 287 䡵 Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . 300 ▫ Electronically Shifted Transfer Case (Four-Position Switch) – If Equipped . . . . . . . 288 䡵 Brake System . . . . . . . . . . . . . . . . . . . . . . . . 302 ▫ Shifting Procedure . . . . . . . . . . . . . . . . . . . 292 䡵 Limited-Slip Differential . . . . . . . . . . . . . . . . . 294 䡵 Driving On Slippery Surfaces . . . . . . . . . . . . .
STARTING AND OPERATING 271 ▫ Spare Tire Matching Original Equipped Tire And Wheel – If Equipped . . . . . . . . . . . . . . 320 ▫ Compact Spare Tire – If Equipped . . . . . . . . 321 ▫ Full Size Spare – If Equipped . . . . . . . . . . . . 322 ▫ Limited-Use Spare – If Equipped . . . . . . . . . 322 ▫ Tire Spinning . . . . . . . . . . . . . . . . . . . . . . . 323 ▫ Tread Wear Indicators . . . . . . . . . . . . . . . . . 323 ▫ Life Of Tire . . . . . . . . . . . . . . . . . . . . . . . .
272 STARTING AND OPERATING 䡵 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . 340 ▫ Common Towing Definitions . . . . . . . . . . . . 340 ▫ Trailer Hitch Classification . . . . . . . . . . . . . . 343 ▫ Over The Road Operation With Snowplow Attached . . . . . . . . . . . . . . . . . . . . . . . . . . 356 ▫ Operating Tips . . . . . . . . . . . . . . . . . . . . . . 356 ▫ General Maintenance . . . . . . . . . . . . . . ▫ Trailer Towing Weights (Maximum Trailer Weight Ratings) . . . . . . . .
STARTING AND OPERATING 273 STARTING PROCEDURES pedal. Turn the key fob to the START position and release Before starting your vehicle, adjust your seat, adjust both when the engine starts. If the engine fails to start within inside and outside mirrors, and fasten your seat belt. 10 seconds, turn the key fob to the OFF position, wait five seconds, then repeat the “Normal Starting” procedure. The starter should not be operated for more than 15second intervals.
274 STARTING AND OPERATING Extreme Cold Weather (Below –20°F or ⫺29°C) To ensure reliable starting at these temperatures, use of an externally powered electric engine block heater (available from your authorized dealer) is recommended. If Engine Fails To Start If the engine fails to start after you have followed the “Normal Starting” procedure, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there while cranking the engine.
STARTING AND OPERATING 275 If the engine has been flooded, it may start to run, but not have enough power to continue running when the key fob is released. If this occurs, continue cranking with the accelerator pedal pushed all the way to the floor. Release the accelerator pedal and the key fob once the engine is running smoothly. 3500 Models — 5.7L Engine Only The engine block heater cord is routed through the grille by the right front tow hook.
276 STARTING AND OPERATING AUTOMATIC TRANSMISSION CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from REVERSE, PARK, or NEUTRAL into any forward gear when the engine is above idle speed.
STARTING AND OPERATING 277 WARNING! (Continued) • Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should always shift the transmission into PARK, remove the key fob from the ignition, and apply the parking brake. Once the key fob is removed from the ignition, the shift lever is locked in the PARK position, securing the vehicle against unwanted movement.
278 STARTING AND OPERATING Five–Speed Automatic Transmission (545RFE) — into 3 (third gear), the transmission will never shift above third gear, but can shift down to 2 (second gear) or 1 (first 5.7L Engine Only The shift lever display located in the instrument panel gear), when needed. cluster indicates the transmission gear range. The shift lever is mounted either on the right side of the steering column (if equipped) or on the floor console (if equipped).
STARTING AND OPERATING 279 accelerations. This additional gear improves vehicle perfor- To exit ERS mode, press and hold the top of the switch/ mance and cooling capability when towing a trailer on shift lever in the (+) direction until “D” is once again certain grades. In ERS mode, first through third gear are highlighted in the instrument cluster display. underdrive gears, and fourth gear is direct drive. ERS fifth gear (Overdrive) is the same as the normal fourth gear.
280 STARTING AND OPERATING Gear Ranges Do not race the engine when shifting from PARK or NEUTRAL position into another gear range. PARK This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never use PARK while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. Always apply the parking brake first, then place the shift lever in the PARK position.
STARTING AND OPERATING 281 NEUTRAL • the engine coolant (antifreeze) has reached normal This range is for when the vehicle is standing for prooperating temperature; longed periods with the engine running. The engine may • vehicle speed is above approximately 30 mph be started in this range. Set the parking brake and shift (48 km/h); the transmission into PARK if you must leave the vehicle.
282 STARTING AND OPERATING Temperature Warning Light” may illuminate and the transmission may downshift out of Overdrive until the transmission cools down. After cool down, the transmission will resume normal operation. The transmission will downshift from Overdrive to DRIVE if the accelerator pedal is fully pressed at vehicle speeds above approximately 35 mph (56 km/h). When To Use “TOW/HAUL” Mode When driving in hilly areas, towing a trailer, carrying a heavy load, etc.
STARTING AND OPERATING 283 The “TOW/HAUL Indicator Light” will illuminate in the NOTE: instrument cluster to indicate when the switch has been • The torque converter clutch will not engage until the transmission fluid and engine coolant (antifreeze) are activated. Pressing the switch a second time restores warm [usually after 1 to 3 miles (1.6 to 4.8 km) of normal operation. If the “TOW/HAUL” mode is desired, driving].
284 STARTING AND OPERATING FOUR-WHEEL DRIVE OPERATION — IF EQUIPPED Four-wheel drive trucks are equipped with either a manually shifted transfer case or an electronically shifted transfer case. Refer to the operating instructions for your transfer case, located in this section for further information. Manually Shifted Transfer Case – If Equipped The transfer case provides four mode positions.
STARTING AND OPERATING 285 When operating your vehicle in 4L, the engine speed is approximately three times that of the 2H or 4H positions at a given road speed. Take care not to overspeed the engine and do not exceed 25 mph (40 km/h). Proper operation of four-wheel drive vehicles depends on tires of equal size, type and circumference on each wheel. Any difference will adversely affect shifting and can cause damage to the drivetrain.
286 STARTING AND OPERATING For additional information on the appropriate use of each 4L transfer case mode position, see the information below: Four-Wheel Drive Low Range - This range locks the front and rear driveshafts together forcing the front and rear 2H wheels to rotate at the same speed. Additional traction Rear-Wheel Drive High Range - This range is for normal and maximum pulling power for loose, slippery road street and highway driving on dry hard surfaced roads. surfaces only.
STARTING AND OPERATING 287 2H or 4H ⇔ 4L • Shifting into or out of 4L is possible with the vehicle With the vehicle rolling at 2 to 3 mph (3 to 5 km/h), shift completely stopped, however difficulty may occur due the transmission into NEUTRAL. While the vehicle is to the mating clutch teeth not being properly aligned. coasting at 2 to 3 mph (3 to 5 km/h), shift the transfer Several attempts may be required for clutch teeth case lever firmly to the desired position.
288 STARTING AND OPERATING Electronically Shifted Transfer Case (Four-Position Switch) – If Equipped This is an electronic shift transfer case and is operated by the 4WD Control Switch (Transfer Case Switch), which is located on the instrument panel.
STARTING AND OPERATING 289 desired position. Refer to “Shifting Procedure” for specific shifting instructions. The 4WD LOCK and 4WD LOW positions are designed for loose, slippery road surfaces only. Driving in the 4WD LOCK and 4WD LOW positions on dry hard surfaced roads may cause increased tire wear and damage to the driveline components. NOTE: The transfer case NEUTRAL position is selected by pressing the recessed button located on the lower left hand corner of the 4WD Control Switch.
290 STARTING AND OPERATING NOTE: Before retrying a selection, make certain that all the necessary requirements for selecting a new transfer case position have been met. To retry the selection, turn the control knob back to the current position, wait five seconds, and retry selection. To find the shift requirements, refer to the ⬙Shifting Procedure⬙ in this section for further information. The “SVC 4WD Warning Light” monitors the electronic shift four-wheel drive system.
STARTING AND OPERATING 291 Proper operation of four-wheel drive vehicles depends For additional information on the appropriate use of each on tires of equal size, type and circumference on each transfer case mode position, see the information below: wheel. Any difference in tire size can cause damage to the 2WD drivetrain. Rear Wheel Drive High Range - This range is for normal Because four-wheel drive provides improved traction, street and highway driving on dry, hard surfaced roads.
292 STARTING AND OPERATING N • If all the requirements to select a new transfer case Neutral - This range disengages both the front and rear position have been met, the current position indicator driveshafts from the powertrain. To be used for flat light will turn OFF, the selected position indicator light towing behind another vehicle. Refer to “Recreational will flash until the transfer case completes the shift.
STARTING AND OPERATING 293 NOTE: The four-wheel drive system will not allow shifts between 2WD/4WD LOCK if the front and/or rear wheels are spinning (no traction). In this situation, the selected position indicator light will flash and the original position indicator light will remain ON. At this time, reduce speed and stop spinning the wheels to complete the shift. 2. Shift the transmission into NEUTRAL. 3. While still rolling, rotate the transfer case control switch to the desired position. 4.
294 STARTING AND OPERATING NOTE: • If Steps 1 or 2 of either the Preferred or Alternate Procedure are not satisfied prior to attempting the shift, then the desired position indicator light will flash continuously while the original position indicator light is ON, until all requirements have been met. • The ignition switch must be in the ON position for a shift to take place and for the position indicator lights to be operable.
STARTING AND OPERATING 295 WARNING! On vehicles equipped with a limited-slip differential never run the engine with one rear wheel off the ground since the vehicle may drive through the rear wheel remaining on the ground. You could lose control of the vehicle. Care should be taken to avoid sudden accelerations when both rear wheels are on a slippery surface. This could cause both rear wheels to spin, and allow the vehicle to slide sideways on the crowned surface of a road or in a turn.
296 STARTING AND OPERATING Traction When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface. This is known as hydroplaning and may cause partial or complete loss of vehicle control and stopping ability. To reduce this possibility, the following precautions should be observed: 1. Slow down during rainstorms or when the roads are slushy. 2. Slow down if the road has standing water or puddles. 3.
STARTING AND OPERATING 297 Shallow Standing Water Although your vehicle is capable of driving through shallow standing water, consider the following Caution and Warning before doing so. CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle.
298 STARTING AND OPERATING WARNING! • Driving through standing water limits your vehicle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances. Therefore, after driving through standing water, drive slowly and lightly press on the brake pedal several times to dry the brakes.
STARTING AND OPERATING 299 • Upon initial start-up in cold weather, the power steering pump may make noise for a short amount of time. This is due to the cold, thick fluid in the steering system. This noise should be considered normal, and it does not in any way damage the steering system. WARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible.
300 STARTING AND OPERATING WARNING! Fluid level should be checked on a level surface and with the engine off to prevent injury from moving parts and to ensure accurate fluid level reading. Do not overfill. Use only manufacturer’s recommended power steering fluid. The foot operated parking brake is located below the lower left corner of the instrument panel. To apply the park brake, firmly push the park brake pedal fully. To release the parking brake, pull the parking brake release handle.
STARTING AND OPERATING 301 When the parking brake is applied with the ignition The parking brake should always be applied whenever switch ON, the “Brake Warning Light” in the instrument the driver is not in the vehicle. cluster will illuminate. NOTE: • When the parking brake is applied and the automatic transmission is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver.
302 STARTING AND OPERATING WARNING! (Continued) • Always fully apply the parking brake when leaving your vehicle or it may roll and cause damage or injury. Also, be certain to leave an automatic transmission in PARK, a manual transmission in REVERSE or first gear. Failure to do so may cause the vehicle to roll and cause damage or injury. CAUTION! If the “Brake Warning Light” remains on with the parking brake released, a brake system malfunction is indicated.
STARTING AND OPERATING 303 Four-Wheel Anti-Lock Brake System WARNING! The Four-Wheel Anti-Lock Brake System contains sophisticated electronic equipment. It may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capability. Installation of such equipment should be performed by qualified professionals. The system’s pump motor runs during an ABS stop to provide regulated hydraulic pressure.
304 STARTING AND OPERATING ABS Warning Light The ABS includes an amber warning light. When the light is illuminated, the ABS is not functioning. The system reverts to standard, non-anti-lock brakes. WARNING! • Pumping of the anti-lock brakes will diminish their effectiveness and may lead to a collision. Pumping makes the stopping distance longer. Just press firmly on your brake pedal when you need to slow down or stop.
STARTING AND OPERATING 305 TIRE SAFETY INFORMATION Tire Markings NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter ⬙P⬙ is absent from this tire size designation.
306 STARTING AND OPERATING Tires designed to this standard have the letter “T” • High flotation tire sizing is based on U.S. design molded into the sidewall preceding the size designastandards and it begins with the tire diameter molded tion. Example: T145/80D18 103M. into the sidewall. Example: 31x10.5 R15 LT. Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ....blank....
STARTING AND OPERATING 307 EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
308 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
STARTING AND OPERATING 309 Tire Terminology And Definitions Term B-Pillar Cold Tire Pressure Maximum Inflation Pressure Recommended Inflation Pressure Tire Placard Definition The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.
310 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar.
STARTING AND OPERATING 311 To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on the Tire and Loading Information placard. Loading The combined weight of occupants, cargo/luggage and The vehicle maximum load on the tire must not exceed trailer tongue weight (if applicable) should never exceed the load carrying capacity of the tire on your vehicle. You the weight referenced here.
312 STARTING AND OPERATING 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if “XXX” • The following table shows examples on how to calculate total load, cargo/luggage, and towing capacities amount equals 1,400 lbs (635 kg) and there will be five of your vehicle with varying seating configurations 150 lb (68 kg) passengers in your vehicle, the amount of and number and size of occupants.
STARTING AND OPERATING 313 5
314 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
STARTING AND OPERATING 315 WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Tire Inflation Pressures The proper cold tire inflation pressure is listed on the driver’s side “B” Pillar or rear edge of the driver’s side door.
316 STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the winter.
STARTING AND OPERATING 317 Tire Inflation Pressure – 4500/5500 With Steel Carcass Ply Tires This type of tire utilizes steel cords in the sidewall. As such, they cannot be treated like normal light truck tires. Adjusting tire pressure must be performed by personnel trained, supervised and equipped accordingly.
318 STARTING AND OPERATING 4500/5500 Tire Inflation
STARTING AND OPERATING 319 When adjusting inflation pressure to a tire and wheel Tire Pressures For High Speed Operation assembly mounted on a vehicle, use a Remote Mount The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condiAutomatic Inflation Kit or see your authorized dealer.
320 STARTING AND OPERATING Radial Ply Tires WARNING! Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly. The instability could cause a collision resulting in serious injury or death. Always use radial ply tires in sets of four (or six, in case of trucks with dual rear wheels). Never combine them with other types of tires.
STARTING AND OPERATING 321 CAUTION! Because of the reduced ground clearance, do not take your vehicle through an automatic car wash with a compact, full size or limited-use temporary spare installed. Damage to the vehicle may result. Compact Spare Tire – If Equipped The compact spare is for temporary emergency use only.
322 STARTING AND OPERATING your original equipment tire, replace (or repair) the Full Size Spare – If Equipped The full size spare is for temporary emergency use only. original equipment tire and reinstall on the vehicle at the This tire may look like the original equipped tire on the first opportunity. front or rear axle of your vehicle, but it is not. This spare WARNING! tire may have limited tread life.
STARTING AND OPERATING 323 Tire Spinning When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping when you are stuck. Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. Refer to “Freeing A Stuck Vehicle” in “What To Do In Emergencies” for further information.
324 STARTING AND OPERATING These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Many states have laws requiring tire replacement at this point. WARNING! Tires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure.
STARTING AND OPERATING 325 Information” placard for the size designation of your tire. The Load Index and Speed Symbol for your tire will be found on the original equipment tire sidewall. See the Tire Sizing Chart example found in the Tire Safety Information section of this manual for more information relating to the Load Index and Speed Symbol of a tire. It is recommended to replace the two front tires or two rear tires as a pair. Replacing just one tire can seriously affect your vehicle’s handling.
326 STARTING AND OPERATING WARNING! (Continued) • Never use a tire with a smaller load index or capacity, other than what was originally equipped on your vehicle. Using a tire with a smaller load index could result in tire overloading and failure. You could lose control and have a collision resulting in serious injury or death. • Failure to equip your vehicle with tires having adequate speed capability can result in sudden tire failure and loss of vehicle control resulting in serious injury or death.
STARTING AND OPERATING 327 CAUTION! (Continued) CAUTION! (Continued) • Because of limited chain clearance between tires and other suspension components, it is important that only chains in good condition are used. Broken chains can cause serious vehicle damage. Stop the vehicle immediately if noise occurs that could suggest chain breakage. Remove the damaged parts of the chain before further use. • Install chains as tightly as possible and then retighten after driving about 1/2 mi (0.8 km).
328 STARTING AND OPERATING • On 4X2 vehicles, class “U” snow chains are permitted on the rear wheels only of vehicles equipped with LT245/70R17, LT265/70R17, and LT235/80R17 size tires. SNOW TIRES Some areas of the country require the use of snow tires during the winter. All season tires can be identified by the M+S designation on the tire sidewall.
STARTING AND OPERATING 329 While studded tires improve performance on ice, skid and traction capability on wet or dry surfaces may be poorer than that of non-studded tires. Some states prohibit studded tires; therefore, local laws should be checked before using these tire types. Refer to the “Maintenance Schedule” for the proper maintenance intervals. More frequent rotation is permissible if desired. The reasons for any rapid or unusual wear should be corrected prior to rotation being performed.
330 STARTING AND OPERATING NOTE: On Canadian vehicles only, if your vehicle is Dual Rear Wheels equipped with All-Season type tires on the front and On/Off Road type tires mounted on the rear, do not use a front to back rotation pattern. Instead, rotate your tires side to side at the recommended intervals. Tire Rotation The tires used on dual wheel assemblies should be matched for wear to prevent overloading one tire in a set. To check if tires are even, lay a straight edge across all four tires.
STARTING AND OPERATING 331 CAUTION! 4500/5500 Dual Rear Tires have only one approved direction of rotation. This is to accommodate the asymmetrical design (tread pattern) of the On/Off road tire. • When replacing a flat, the spare tire may have to be remounted on the rim or installed at a different location to maintain the correct placement of the tire on the wheel relative to the tire/wheel position on the vehicle.
332 STARTING AND OPERATING Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the Worldwide Fuel Charter, WWFC) to define fuel properties necessary to deliver enhanced emissions, performance and durability for your vehicle. We recommend the use of gasolines that meet the WWFC specifications if they are available. Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as 10% ethanol, MTBE, and ETBE.
STARTING AND OPERATING 333 E-85 Usage In Non-Flex Fuel Vehicles • disconnect and reconnect the battery to reset the Non-FFV vehicles are compatible with gasoline containengine controller memory ing 10% ethanol (E10). Gasoline with higher ethanol More extensive repairs will be required for prolonged content may void the vehicle’s warranty. exposure to E-85 fuel.
334 STARTING AND OPERATING allowed in the United States. MMT is prohibited in Federal and California reformulated gasoline. Materials Added To Fuel All gasolines sold in the United States are required to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and would result in unnecessary cost. Therefore, you should not have to add anything to the fuel.
STARTING AND OPERATING 335 CAUTION! (Continued) • The use of fuel additives which are now being sold as octane enhancers is not recommended. Many of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsibility of the manufacturer. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you.
336 STARTING AND OPERATING WARNING! (Continued) CAUTION! • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open. • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap). A poorly fitting cap could let impurities into the fuel system.
STARTING AND OPERATING 337 WARNING! WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is being filled. • Never add fuel to the vehicle when the engine is running. This is in violation of most state and federal fire regulations and may cause the MIL to turn on. A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling.
338 STARTING AND OPERATING VEHICLE LOADING rear axle systems (GAWR). Total load must be limited so GVWR and front and rear GAWR are not exceeded. Certification Label As required by National Highway Traffic Safety Admin- Payload istration regulations, your vehicle has a certification label The payload of a vehicle is defined as the allowable load weight a truck can carry, including the weight of the affixed to the driver’s side door or pillar. driver, all passengers, options and cargo.
STARTING AND OPERATING 339 Tire Size The tire size on the Label represents the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size. Loading The actual total weight and the weight of the front and rear of your vehicle at the ground can best be determined by weighing it when it is loaded and ready for operation.
340 STARTING AND OPERATING Improper weight distributions can have an adverse effect To maintain warranty coverage, follow the requirements on the way your vehicle steers and handles and the way and recommendations in this manual concerning vethe brakes operate. hicles used for trailer towing. CAUTION! Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWR. If you do, parts on your vehicle can break, or it can change the way your vehicle handles.
STARTING AND OPERATING 341 The recommended way to measure GTW is to put your fully loaded trailer on a vehicle scale. The entire weight of the trailer must be supported by the scale. Gross Combination Weight Rating (GCWR) The GCWR is the total permissible weight of your vehicle and trailer when weighed in combination. WARNING! It is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded.
342 STARTING AND OPERATING that typically provides adjustable friction associated with safety. The addition of a friction/hydraulic sway control the telescoping motion to dampen any unwanted trailer also dampens sway caused by traffic and crosswinds and contributes positively to tow vehicle and trailer stability. swaying motions while traveling.
STARTING AND OPERATING 343 Fifth-Wheel Hitch The fifth-wheel hitch is a special high platform with a coupling that mounts over the rear axle of the tow vehicle in the truck bed. It connects a vehicle and fifth-wheel trailer with a coupling king pin. Gooseneck Hitch The gooseneck hitch employs a pivoted coupling arm which attaches to a ball mounted in the bed of a pickup truck. The coupling arm connects to the hitch mounted over the rear axle in the truck bed.
344 STARTING AND OPERATING All trailer hitches should be professionally installed on Never exceed the maximum tongue weight stamped on your trailer hitch. your vehicle. Trailer Towing Weights (Maximum Trailer Weight Ratings) NOTE: For additional trailer towing information (maximum trailer weight ratings) refer to the following website addresses: • http://www.ramtrucks.com. • http://www.dodge.ca (Canada).
STARTING AND OPERATING 345 • The weight of any other type of cargo or equipment put in or on your vehicle • The weight of the driver and all passengers. NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle. Refer to “Tire Safety Information/Tire and Loading Information Placard” in “Starting and Operating” for further information.
346 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have a collision. • When hauling cargo or towing a trailer, do not overload your vehicle or trailer.
STARTING AND OPERATING 347 WARNING! (Continued) 4. Trailer tongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). • Check for signs of tire wear or visible tire damage before towing a trailer. Refer to “Tires – General Information” in “Starting and Operating” for the proper inspection procedure.
348 STARTING AND OPERATING • An electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. • Trailer brakes are recommended for trailers over 1,000 lbs (454 kg) and required for trailers in excess of 2,000 lbs (907 kg).
STARTING AND OPERATING 349 NOTE: This module has been designed and verified for The user interface consists of the following: electric trailer brakes. To determine the type of brakes on GAIN/ Brake Output Power Display your trailer, check with your trailer manufacturer or Shows the current GAIN setting. dealer. This display may also be used to display diagnostic information, if needed.
350 STARTING AND OPERATING lever is activated while the brake is also applied, the GAIN Adjustment Buttons (+/-) greater of the two inputs determines the power sent to Pressing these buttons will adjust the brake control the trailer brakes. power output to the trailer brakes in 0.5 increments. The GAIN setting can be increased to a maximum of 10 or The trailer and the vehicle’s brake lamps will come on decreased to a minimum of 0 (no trailer braking).
STARTING AND OPERATING 351 1. Make sure the trailer brakes are in good working Repeat Steps 5 and 6 until the GAIN setting is at a point condition, functioning normally, and properly adjusted. just below trailer wheel lockup. If towing a heavier See your trailer dealer if necessary. trailer, trailer wheel lockup may not be attainable even with the maximum GAIN setting of 10. 2. Hook up the trailer and make the electrical connections according to the trailer manufacturer’s instructions.
352 STARTING AND OPERATING CAUTION! The ITBM module has been designed and verified for electric trailer brakes. Connecting a trailer that is not compatible with the ITBM system may result in reduced or complete loss of trailer braking. There may be a increase in stopping distance or trailer instability which could result in damage to your vehicle, trailer, or other property. WARNING! The ITBM module has been designed and verified for electric trailer brakes.
STARTING AND OPERATING 353 WARNING! Any work done to the vehicle’s electrical system or wiring should be performed by a qualified automotive technician. If done improperly it may cause damage to the electrical system wiring and could result in serious or fatal injury. NOTE: Using “TOW/HAUL” mode or a lower gear range while operating the vehicle under heavy operating conditions will improve performance and extend transmission life by reducing excessive shifting and heat build up.
354 STARTING AND OPERATING Electronic Speed Control – If Equipped − Do not use in hilly terrain or with heavy loads. − Air Conditioning Turn off temporarily. − When using the speed control, if you experience speed SNOWPLOW drops greater than 10 mph (16 km/h), disengage until Snowplow Prep Packages are available as a factory installed option. These packages include components you can get back to cruising speed. necessary to equip your vehicle with a snowplow.
STARTING AND OPERATING 355 WARNING! Attaching a snowplow to this vehicle could adversely affect performance of the airbag system in a collision. Do not expect that the airbag will perform as described earlier in this manual CAUTION! The “Lamp Out” indicator could illuminate if exterior lamps are not properly installed. Before Plowing • Check the runners and cutting edge for excessive wear. The cutting edge should be 1/4 to 1/2 in (6 cm to 1.2 cm) above ground in snow plowing position.
356 STARTING AND OPERATING The loaded vehicle weight, including the snowplow system, all aftermarket accessories, driver, passengers, options, and cargo, must not exceed either the Gross Vehicle Weight (GVWR) or Gross Axle Weight (GAWR) ratings. These weights are specified on the Safety Compliance Certification Label on the driver’s side door opening. Maintain and operate your vehicle and snowplow equipment following the recommendations provided by the specific snowplow manufacturer.
STARTING AND OPERATING 357 NOTE: During snowplow usage on vehicles equipped with outside temperature display, the display may show higher temperatures than the outside ambient temperature. The higher displayed temperature is due to blocked or reduced airflow to the underhood ambient temperature sensor caused by the snowplow.
358 STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.
STARTING AND OPERATING 359 This may be accomplished using a tow dolly or vehicle trailer. If using a tow dolly, follow this procedure: 1. Properly secure the dolly to the tow vehicle, following the dolly manufacturer’s instructions. 2. Drive the rear wheels onto the tow dolly. 3. Firmly set the parking brake. Place automatic transmission in PARK, manual transmission in gear (not in Neutral). CAUTION! • Towing with the rear wheels on the ground will cause severe transmission damage.
360 STARTING AND OPERATING CAUTION! CAUTION! (Continued) • Front or rear wheel lifts should not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when recreational towing. • Tow only in the forward direction. Towing this vehicle backwards can cause severe damage to the transfer case. • Automatic transmissions must be placed in the PARK position for recreational towing.
STARTING AND OPERATING 361 WARNING! You or others could be injured if you leave the vehicle unattended with the transfer case in the Neutral (N) position without first fully engaging the parking brake. The transfer case Neutral (N) position disengages both the front and rear driveshafts from the powertrain and will allow the vehicle to move, even if the transmission is in PARK. The parking brake should always be applied when the driver is not in the vehicle.
362 STARTING AND OPERATING 12. Shift the transmission into PARK or place manual Shifting Out Of Neutral (N) – Manual Shift transmission in gear (not in Neutral). Transfer Case (If Equipped) Use the following procedure to prepare your vehicle for CAUTION! normal usage. Damage to the transmission may occur if the transmission is shifted into PARK with the transfer case in Neutral (N) and the engine running.
STARTING AND OPERATING 363 7. Shift the automatic transmission into PARK, or place manual transmission in Neutral. 8. Release the brake pedal. 9. Disconnect vehicle from the tow vehicle. 10. Start the engine. 11. Press and hold the brake pedal. 12. Release the parking brake. 13. Shift the transmission into gear, release the brake pedal (and clutch pedal on manual transmissions), and check that the vehicle operates normally.
364 STARTING AND OPERATING 1. Bring the vehicle to a complete stop. Shift automatic 9. Shift the transmission into REVERSE. transmission into PARK. 10. Release the brake pedal (and clutch pedal on manual 2. Turn OFF the engine. transmissions) for five seconds and ensure that there is no vehicle movement. 3. Turn the ignition switch to the ON/RUN position, but do not start the engine. 11. Repeat steps 9 and 10 with automatic transmission in DRIVE or manual transmission in first gear. 4.
STARTING AND OPERATING 365 CAUTION! Damage to the transmission may occur if the transmission is shifted into PARK with the transfer case in NEUTRAL and the engine running. With the transfer case in NEUTRAL, ensure that the engine is OFF prior to shifting the transmission into PARK. continue to be met until the shift has been completed.
366 STARTING AND OPERATING 1. Bring the vehicle to a complete stop, leaving it con- NOTE: When shifting out of transfer case NEUTRAL, nected to the tow vehicle. turning the engine OFF may be required to avoid gear clash. 2. Firmly apply the parking brake. 9. Shift the automatic transmission into PARK, or place 3. Insert the key fob into the ignition switch and turn it to manual transmission in Neutral. the ON/RUN position, but do not start the engine. 10. Release the brake pedal. 4.
STARTING AND OPERATING 367 and must continue to be met until the shift has been • The ignition switch must be in the ON/RUN position completed. If any of these requirements are not met for a transfer case shift to take place and for the prior to pressing the NEUTRAL button, or are no position indicator lights to be operable.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flashers . . . . . . . . . . . . . . . . 370 ▫ Jump-Starting Procedure . . . . . . . . . . . . . . . 384 䡵 Jacking And Tire Changing . . . . . . . . . . . . . . . 370 䡵 Freeing A Stuck Vehicle . . . . . . . . . . . . . . . . . 386 ▫ 3500 Models — If Equipped . . . . . . . . . . . . . 371 䡵 Emergency Tow Hooks — If Equipped . . . . . . 387 ▫ Preparations For Jacking . . . . . . . . . . . . . . . 372 䡵 Shift Lever Override . . . . . . . . . . . . . .
370 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS JACKING AND TIRE CHANGING The Hazard Warning flasher switch is located on the WARNING! upper switch bank just below the radio. Press the switch to turn on the Hazard Warning flasher. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Press the switch a second time to turn off the Hazard Warning flashers.
WHAT TO DO IN EMERGENCIES 371 WARNING! (Continued) • The jack is designed to use as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas. 3500 Models — If Equipped The jack and jack tools are stored under the front passenger seat. Lift the flap on the side of the seat for access.
372 WHAT TO DO IN EMERGENCIES WARNING! After using the jack and tools, always reinstall them in the original carrier and location. While driving you may experience abrupt stopping, rapid acceleration, or sharp turns. A loose jack, tools, bracket or other objects in the vehicle may move around with force, resulting in serious injury. 4500/5500 Models These vehicles do not come equipped with a jack. Preparations For Jacking 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas.
WHAT TO DO IN EMERGENCIES 373 6. Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if the right front wheel is being changed, block the left rear wheel. NOTE: Passengers should not remain in the vehicle when the vehicle is being jacked.
374 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • If working on or near a roadway, be extremely careful of motor traffic. • To assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground. CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. 1. If equipped, remove the spare wheel, jack, and tools from storage. 2.
WHAT TO DO IN EMERGENCIES 375 6 Front Jacking Locations Rear Jacking Location When changing a rear wheel, assemble the jack drive tube to the jack and connect the drive tube to the extension tube. Securely place the jack under the sway bar bracket (unless both tires are flat on one side, then place jack under shock bracket) facing forward in vehicle. Connect the jack tube extension and lug wrench.
376 WHAT TO DO IN EMERGENCIES 4. By rotating the wheel wrench clockwise, raise the 6. Using the wheel wrench, finish tightening the nuts vehicle until the wheel just clears the surface. using a crisscross pattern. The correct nut tightness is 135 ft lbs (183 N·m) torque for single rear wheel (SRW) WARNING! models and 145 ft lbs (197 N·m) for dual rear wheel models.
WHAT TO DO IN EMERGENCIES 377 8. Lower the jack to its fully closed position. If the jack will not lower by turning the dial (thumbwheel) by hand, it may be necessary to use the jack drive tube in order to lower the jack. Stow the replaced tire, jack, and tools as previously described. 9. Adjust the tire pressure when possible. CAUTION! Use extreme caution when removing the front and rear center caps. Damage can occur to the center cap and/or the wheel if screwdriver type tools are used.
378 WHAT TO DO IN EMERGENCIES On 3500 models with dual rear wheels (DRW), you must first remove the hub caps. The jack handle driver has a hook at one end that will fit in the pry off notch of the rear hub caps. Position the hook and pull out on the ratchet firmly. The hub cap should pop off. The wheel skins can now be removed. For the front hub cap on models use the blade on the end of the lug wrench to pry the caps off. The wheel skin can now be removed.
WHAT TO DO IN EMERGENCIES 379 Dual Rear Wheels Dual wheels are flat mounted, center piloted. The lug nuts are a two-piece assembly. When the tires are being rotated or replaced, clean these lug nuts and add two drops of oil at the interface between the hex and the washer. Slots in the wheels will assist in properly orienting the inner and outer wheels. Align these slots when assembling the wheels for best access to the tire valve on the inner wheel.
380 WHAT TO DO IN EMERGENCIES These dual rear wheels should be tightened as follows: Tightening Pattern (10 Studs) Tightening Pattern (8 Studs) 1. Tighten the wheel nuts in the numbered sequence to a snug fit. 2. Retighten the wheel nuts in the same sequence to the torques listed in the table.
WHAT TO DO IN EMERGENCIES 381 second time to verify that specific torque has been bolt holes in the wheels becoming elongated. This is achieved. Retighten to specifications at 100 miles especially important during the first few hundred miles/ kilometers of operation to allow the wheel nuts to (160 km) and after 500 miles (800 km). become properly set. All nuts should first be firmly It is recommended that wheel stud nuts be kept torqued seated against the wheel.
382 WHAT TO DO IN EMERGENCIES HOISTING NOTE: When using a portable battery booster pack A conventional floor jack may be used at the jacking follow the manufacturer’s operating instructions and locations. Refer to the graphics that show jacking loca- precautions. tions. However, a floor jack or frame hoist must never be CAUTION! used on any other parts of the underbody. CAUTION! Never use a floor jack directly under the differential housing of a loaded truck or damage to your vehicle may result.
WHAT TO DO IN EMERGENCIES 383 NOTE: The positive battery post is covered with a protective cap. Lift up on the cap to gain access to the positive battery post. Positive Battery Post WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be seriously injured.
384 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. WARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure WARNING! Failure to follow this procedure could result in personal injury or property damage due to battery explosion.
WHAT TO DO IN EMERGENCIES 385 WARNING! Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. 8. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery. 9. Disconnect the positive (+) end of the jumper cable from the positive (+) post of the discharged vehicle.
386 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE If the vehicle becomes stuck in snow, sand, or mud, it can often be moved by a rocking motion. Move the shift lever rhythmically between DRIVE and REVERSE while applying slight pressure to the accelerator. CAUTION! • Racing the engine or spinning the wheels may lead to transmission overheating and failure. Allow the engine to idle with the shift lever in NEUTRAL for at least one minute after every five rocking-motion cycles.
WHAT TO DO IN EMERGENCIES 387 WARNING! WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping when you are stuck and do not let anyone near a spinning wheel, no matter what the speed. • Chains are not recommended for freeing a stuck vehicle.
388 WHAT TO DO IN EMERGENCIES SHIFT LEVER OVERRIDE If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use the following procedure to temporarily move the shift lever: 1. Firmly set the parking brake. 2. Turn the ignition switch to the ON/RUN position without starting the engine. 3. Tilt the steering wheel to the full up position. 4. Press and maintain firm pressure on the brake pedal. 5.
WHAT TO DO IN EMERGENCIES 389 TOWING A DISABLED VEHICLE Proper towing or lifting equipment is required to prevent damage to your vehicle. Use only tow bars and other equipment designed for the purpose, following equipment manufacturer’s instructions. Use of safety chains is mandatory. Attach a tow bar or other towing device to the main structural members of the vehicle—not to bumpers or associated brackets. State and local laws applying to vehicles under tow must be observed.
390 WHAT TO DO IN EMERGENCIES CAUTION! Towing faster than 30 mph (50 km/h) or for more than 15 miles (25 km) can cause severe damage to the transmission. Such damage is not covered by the New Vehicle Limited Warranty. If the vehicle is to be towed faster than 30 mph (50 km/h) or more than 15 miles (25 km) the vehicle must be towed with the rear wheels OFF the ground.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 5.7L . . . . . . . . . . . . . 393 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . 400 䡵 Onboard Diagnostic System (OBD II) . . . . . . . 394 ▫ Engine Air Cleaner Filter . . . . . . . . . . . . . . . 401 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . 394 ▫ Maintenance-Free Battery . . . . . . . . . . . . . . 402 䡵 Emissions Inspection And Maintenance Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . .
392 MAINTAINING YOUR VEHICLE ▫ Exhaust System . . . . . . . . . . . . . . . . . . . . . 406 䡵 Replacement Bulbs . . . . . . . . . . . . . . . . . . . . 434 ▫ Cooling System . . . . . . . . . . . . . . . . . . . . . 409 䡵 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 434 ▫ Brake System . . . . . . . . . . . . . . . . . . . . . . . 415 ▫ Dual Or Quad Headlamp/Front Park And Turn Signal – If Equipped . . . . . . . . . . . . . . 434 ▫ Rear Axle And 4X4 Front Driving Axle Fluid Level . . . .
MAINTAINING YOUR VEHICLE 393 ENGINE COMPARTMENT — 5.
394 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM (OBD II) Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
MAINTAINING YOUR VEHICLE 395 the SELECT button to turn off the message. If the Normally, the OBD II system will be ready. The OBD II problem continues, the message will appear the next time system may not be ready if your vehicle was recently serviced, recently had a dead battery or a battery replacethe vehicle is started. ment. If the OBD II system should be determined not A loose, improperly installed, or damaged fuel filler cap ready for the I/M test, your vehicle may fail the test.
396 MAINTAINING YOUR VEHICLE 4. Approximately 15 seconds later, one of two things will system to update. A recheck with the above test routine happen: may then indicate that the system is now ready. a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
MAINTAINING YOUR VEHICLE 397 DEALER SERVICE Your authorized dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner. Service Manuals are available which include detailed service information for your vehicle. Refer to these Service Manuals before attempting any procedure yourself. NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you.
398 MAINTAINING YOUR VEHICLE CAUTION! (Continued) • Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty.
MAINTAINING YOUR VEHICLE 399 CAUTION! recommends engine oils that are API Certified and meet the requirements of Chrysler Material Standard MS-6395. Overfilling or underfilling the crankcase will cause oil aeration or loss of oil pressure. This could damage your engine. American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Change Engine Oil Petroleum Institute (API).
400 MAINTAINING YOUR VEHICLE Engine Oil Viscosity (SAE Grade) SAE 5W-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to “Engine Compartment” in “Maintaining Your Vehicle” for further information.
MAINTAINING YOUR VEHICLE 401 Engine Oil Filter Selection The manufacturer’s engines have a full-flow type oil filter. Use a filter of this type for replacement. The quality of replacement filters varies considerably. Only highquality filters should be used to assure most efficient service. MOPAR威 engine oil filters are a high-quality oil filter and are recommended. Engine Air Cleaner Filter Refer to the “Maintenance Schedule” for the proper maintenance intervals.
402 MAINTAINING YOUR VEHICLE Maintenance-Free Battery Your vehicle is equipped with a maintenance-free battery. You will never have to add water, nor is periodic maintenance required. WARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water.
MAINTAINING YOUR VEHICLE 403 CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and are identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion.
404 MAINTAINING YOUR VEHICLE WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air conditioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Section 3 of the Warranty Information Book, located on the DVD, for further warranty information. • The air conditioning system contains refrigerant under high pressure.
MAINTAINING YOUR VEHICLE 405 Body Lubrication Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, sliding doors and hood hinges, should be lubricated periodically with a lithium based grease, such as MOPAR威 Spray White Lube or equivalent, to assure quiet, easy operation and to protect against rust and wear. Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit.
406 MAINTAINING YOUR VEHICLE present please proceed to clean wiper blades with humid cloth removing any debris that may be affecting its function. Adding Washer Fluid The fluid reservoir is located under the hood and should be checked for fluid level at regular intervals. Fill the reservoir with windshield washer solvent only (not radiator antifreeze). When refilling the washer fluid reservoir, take some washer fluid and apply it to a cloth or towel and wipe the wiper blades clean.
MAINTAINING YOUR VEHICLE 407 If you notice a change in the sound of the exhaust system; or if the exhaust fumes can be detected inside the vehicle; or when the underside or rear of the vehicle is damaged; have an authorized technician inspect the complete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment.
408 MAINTAINING YOUR VEHICLE CAUTION! • The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the catalyst as an emissions control device and may seriously reduce engine performance and cause serious damage to the engine. • Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition.
MAINTAINING YOUR VEHICLE 409 To minimize the possibility of catalytic converter dam- Cooling System age: • Do not shut off the engine or interrupt the ignition, when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. WARNING! You or others can be badly burned by hot coolant or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool.
410 MAINTAINING YOUR VEHICLE Check the coolant recovery bottle tubing for brittle rub- Refer to the “Maintenance Schedule” for the proper ber, cracking, tears, cuts and tightness of the connection maintenance intervals. at the bottle and radiator. Inspect the entire system for Selection Of Coolant leaks. Use only the manufacturer’s recommended engine coolWith the engine at normal operating temperature (but ant (antifreeze).
MAINTAINING YOUR VEHICLE 411 CAUTION! (Continued) • Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be compatible with the engine coolant (antifreeze) and may plug the radiator. • This vehicle has not been designed for use with Propylene Glycol based engine coolant (antifreeze). Use of Propylene Glycol based engine coolant (antifreeze) is not recommended.
412 MAINTAINING YOUR VEHICLE Please note that it is the owner’s responsibility to maintain the proper level of protection against freezing according to the temperatures occurring in the area where the vehicle is operated. NOTE: Mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifreeze) and will require more frequent coolant changes.
MAINTAINING YOUR VEHICLE 413 To check the coolant level: Disposal Of Used Coolant Used ethylene glycol-based engine coolant (antifreeze) is 1. Open the coolant reservoir. a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community. To prevent ingestion by animals or children do not store ethylene glycol-based engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground.
414 MAINTAINING YOUR VEHICLE 2. Lift and remove the plastic dipstick from the reservoir of this. As long as the engine operating temperature is neck. satisfactory, the coolant bottle need only be checked once a month. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points To Remember 3. Check the coolant level on the dipstick.
MAINTAINING YOUR VEHICLE 415 • Do not overfill the coolant recovery bottle. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the • Check engine coolant (antifreeze) freeze point in the condenser clean, also. radiator and in the coolant recovery bottle. If engine coolant (antifreeze) needs to be added, contents of • Do not change the thermostat for Summer or Winter operation.
416 MAINTAINING YOUR VEHICLE WARNING! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full braking capacity in an emergency. The brake master cylinder has a translucent plastic reservoir. On the outboard side of the reservoir, there is a “MAX” dot and an “MIN” dot.
MAINTAINING YOUR VEHICLE 417 WARNING! WARNING! (Continued) • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also identified on the original factory installed hydraulic master cylinder reservoir.
418 MAINTAINING YOUR VEHICLE WARNING! (Continued) • Do not allow petroleum based fluid to contaminate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in a collision. fill hole on the front axle. The fluid level should be level with the bottom of the fill hole on the rear axle. Drain And Refill On 4500/5500 vehicles, remove the lower bolt to drain the axle fluid. Rear Axle And 4x4 Front Driving Axle Fluid Level For models with 9.
MAINTAINING YOUR VEHICLE 419 Refer to the “Maintenance Schedule” for the proper on concrete or dry pavement. These conditions should be considered normal operation of the limited slip maintenance intervals. differential. Lubricant Selection Refer to “Fluids, Lubricants, and Genuine Parts” in Transfer Case “Maintaining Your Vehicle” for further information.
420 MAINTAINING YOUR VEHICLE Automatic Transmission Selection Of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission performance. Use only the manufacturer’s recommended transmission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. It is important that the transmission fluid be maintained at the prescribed level using the recommended fluid.
MAINTAINING YOUR VEHICLE 421 Fluid Level Check If equipped with a dipstick, use the following procedure. If your vehicle has a capped dipstick tube, it is sealed and should not be tampered with. Your authorized dealer has the proper tools to ensure that the fluid level is set properly. The fluid level should be checked when the engine is fully warmed up and the fluid in the transmission is at normal operating temperature.
422 MAINTAINING YOUR VEHICLE 6. Remove the dipstick again and note the fluid level on CAUTION! both sides. The fluid level should be between the “HOT” (upper) reference holes on the dipstick at normal operat- Be aware that if the fluid temperature is below 50°F ing temperature. Verify that solid coating of oil is seen on (10°C) it may not register on the dipstick. Do not add both sides of the dipstick.
MAINTAINING YOUR VEHICLE 423 NOTE: If the transmission is disassembled for any The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion reason, the fluid and filter(s) should be changed. resistance built into your vehicle. It is important that proper lubricant is used in the transmission.
424 MAINTAINING YOUR VEHICLE Washing • Wash your vehicle regularly. Always wash your vehicle in the shade using MOPAR威 Car Wash or equivalent, or a mild car wash soap and rinse the panels completely with clear water. • If insects, tar or other similar deposits have accumulated on your vehicle, use MOPAR威 Super Kleen Bug and Tar Remover or equivalent to remove. CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder which will scratch metal and painted surfaces.
MAINTAINING YOUR VEHICLE 425 • If you detect any stone chips or scratches in the paint, Wheel And Wheel Trim Care touch them up immediately. The cost of such repairs is All wheels and wheel trim, especially aluminum and chrome-plated wheels should be cleaned regularly with a considered the responsibility of the owner. mild soap and water to prevent corrosion.
426 MAINTAINING YOUR VEHICLE • Blot any remaining stain with a clean, damp towel. MOPAR威 Total Clean or equivalent is specifically recommended for leather upholstery. • For tough stains, apply MOPAR威 Total Clean or equivalent, or a mild soap solution to a clean, damp Your leather upholstery can be best preserved by regular cloth and remove stain. Use a fresh, damp towel to cleaning with a damp soft cloth.
MAINTAINING YOUR VEHICLE 427 cleaner. Use caution when cleaning the inside rear window equipped with electric defrosters or the right rear quarter window equipped with the radio antenna. Do not use scrapers or other sharp instruments which may scratch the elements. When cleaning the rearview mirror, Plastic is not as scratch resistant as glass and therefore spray cleaner on the towel or rag that you are using. Do different lens cleaning procedures must be followed. not spray cleaner directly on the mirror.
428 MAINTAINING YOUR VEHICLE Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the belts need cleaning, use a mild soap solution or lukewarm water. Do not remove the belts from the car to wash them. Dry with a soft cloth. Replace the belts if they appear frayed or worn or if the buckles do not work properly.
MAINTAINING YOUR VEHICLE 429 Cavity J03 J04 J05 J06 J07 J08 J09 Cartridge Fuse 25 Amp Natural 40 Amp Green 30 Amp Pink 30 Amp Pink 25 Amp Natural 30 Amp Pink 30 Amp Pink Mini Fuse Description Bat – Passenger Door Node Bat – ABS Pump Cavity J10 J11 Cartridge Fuse 40 Amp Green 30 Amp Pink Mini Fuse Bat – L/Bar/OffRoad Bat – Sway/ Thatchum/Rear Doors Starter Solenoid Bat – ABS Valve J12 Bat – H/Lamp Wash/MTV/ CM2200/Elec Vac Pump Bat – Driver Door Node Bat – DTCM/Axle Locks Bat – Plg/Electric Brake
430 MAINTAINING YOUR VEHICLE Cavity M18 M19 M20 M21 M22 M23 M24 M25 Cartridge Fuse Mini Fuse 25 Amp Natural 5 Amp Tan 25 Amp Natural 25 Amp Natural 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow 10 Amp Red Description Cavity TCM/Trans Range M26 Ign R/ACC – Sunroof/Window Sw Illum Frt Wiper M27 Door Locks M29 Fuel Pump M30 Bat – Trlr Light/ Pre-Safe #2 Bat – Trlr Tow BUX/HGM Bat – J1962 Diag/ Mirrors M31 M28 M32 M33 Cartridge Fuse Mini Fuse 10 Amp Red 15 Amp Blue 10 Amp Red 15 Amp Blue 25 Amp
MAINTAINING YOUR VEHICLE 431 Cavity M34 M35 M36 M37 M38 M39 M40 Cartridge Fuse Mini Fuse 15 Amp Blue 20 Amp Yellow 20 Amp Yellow 10 Amp Red 20 Amp Yellow 30 Amp Green 25 Amp Natural Description Cavity Bat – CCN/Interior Light/SCM/Sw Bank Htd Seat/Htd Str Wheel/Rear Htd Seat Ign R-Rear Seat/ Steer Wheel Horn #1 M41 IOD-CCN/Interior Mods IOD-Amp/Radio M45 Rear Wiper M47 M42 M43 M44 M46 Cartridge Fuse Mini Fuse 15 Amp Blue 10 Amp Red 10 Amp Red 10 Amp Red 10 Amp Red 20 Amp Yellow 10 Amp Red
432 MAINTAINING YOUR VEHICLE Cavity M48 M49 M50 M51 M52 Cartridge Fuse Mini Fuse 20 Amp Yellow 20 Amp Yellow 25 Amp Natural 20 Amp Yellow 10 Amp Red M53 15 Amp Blue M54 20 Amp Yellow Description IGN R/ACC-Pwr Outlet #2 IGN R/ACC/BatPwr Outlet #3 ASD #1, #2 ASD #3 IGN R/S-SWAY/ TCASE/DTCM/ FAD/TRLR BRAKE MOD.
MAINTAINING YOUR VEHICLE 433 NOTE: VEHICLE STORAGE If you are storing your vehicle for more than 21 days, we • When reinstalling the IOD fuse push firmly until fully recommend that you take the following steps to miniseated; the gauges in the instrument cluster will do a mize the drain on your vehicle’s battery: full sweep when the ignition switch is turned to the RUN position. This is a normal condition.
434 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS BULB REPLACEMENT LIGHT BULBS – Interior Bulb No. Dual Or Quad Headlamp/Front Park And Turn Overhead Console Lamps . . . . . . . . . . . . . . . TS 212-2 Signal – If Equipped Dome Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . 7679 1. Open the hood. NOTE: For lighted switches, see your authorized dealer 2. Disconnect and isolate the negative battery cable. for replacement instructions. All of the inside bulbs are brass or glass-wedge base. 3.
MAINTAINING YOUR VEHICLE 435 6. Remove the two headlamp assembly attachment 8. Reach through the access hole of the wheel house screws. splash shield and lift the slide lock upward far enough to disengage it from the lock post on the back of the front lamp unit housing. 7 7. Reach into the front wheel house ahead of the front wheel, remove the fastener, and lift the cover over the access hole in the front of the wheel house splash shield. 9. Remove the headlamp assembly.
436 MAINTAINING YOUR VEHICLE 10. Disconnect electrical connectors. Fog Lamps – If Equipped 11. Replace bulb(s) as necessary. 1. Reach under and behind the front bumper to access the back of the front fog lamp housing. CAUTION! • Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result. • Always use the correct bulb size and type for replacement.
MAINTAINING YOUR VEHICLE 437 Center High-Mounted Stoplamp (CHMSL) With Cargo Lamp 2. Separate the connector holding the housing and wiring harness to the body. 1. Remove the two screws holding the housing/lens to the body as shown. 7 3. Turn the desired bulb socket ⁄ turn and remove the socket and bulb from housing.
438 MAINTAINING YOUR VEHICLE 4. Pull the desired bulb straight from the socket. CAUTION! Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result. • Outside Bulbs: Cargo Lamps • Inside Bulb: Center High-Mounted Stop Lamp 5. Reverse the procedure for installation of bulbs and housing.
MAINTAINING YOUR VEHICLE 439 Cab Top Clearance Lamps – If Equipped 1. Remove the two screws from the top of the lamp. 2. Rotate the socket 1⁄4 turn and pull it from the lamp assembly.
440 MAINTAINING YOUR VEHICLE 3. Pull the bulb straight from it’s socket and replace.
MAINTAINING YOUR VEHICLE 441 FLUID CAPACITIES Fuel (Approximate) Standard Rear Tank Optional Midship Tank Engine Oil with Filter 5.7L Engine (SAE 5W-20, API Certified) Cooling System 5.7L Engine (MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula) or equivalent. U.S. Metric 52 Gallons 22 Gallons 197 Liters 83 Liters 7 Quarts 6.6 Liters 18.7 Quarts 17.
442 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Engine Coolant Engine Oil – 5.7L Engine Engine Oil Filter – 5.7L Engine Spark Plugs – 5.7L Engine Fuel Selection – 5.7L Engine Fluid, Lubricant, or Genuine Part MOPAR威 Antifreeze/Coolant 5–Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395.
MAINTAINING YOUR VEHICLE 443 Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission (Five-Speed MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed 545RFE) ATF+4威 product. Transfer Case MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product. Front and Rear Axle Fluid (4500/ GL-5 SAE 75W-90 Synthetic (MS-9763) or equivalent. 5500) Brake Master Cylinder MOPAR威 DOT 3 and SAE J1703 should be used or equivalent.
M A I N T E N A N C ▫ Required Maintenance Intervals . . . . . . . . . . 448 E MAINTENANCE SCHEDULES CONTENTS 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . 446 ▫ 5.7L Gas Engine . . . . . . . . . . . . . . . . . . . . .
M A I N T E N A N C E 446 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE 5.7L Gas Engine The Scheduled Maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensure the best vehicle performance and reliability. More frequent maintenance may be needed for vehicles in severe operating S conditions, such as dusty areas and very short trip C driving. Inspection and service should also be done H anytime a malfunction is suspected.
MAINTENANCE SCHEDULES 447 M A • Under no circumstances should oil change intervals exceed 8,000 miles (13 000 km) or 6 months, whichever comes first. the vehicle is on level ground will improve the accu- I racy of the oil level reading. Add oil only when the N T level is at or below the ADD or MIN mark. Your authorized dealer will reset the oil change indicator message after completing the scheduled oil change.
M A I N T E N A N C E S C H E D U L E S 8 448 MAINTENANCE SCHEDULES At Each Oil Change • Change the engine oil filter. • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle. Required Maintenance Intervals Refer to the Maintenance Schedules on the following pages for the required maintenance intervals.
MAINTENANCE SCHEDULES 449 M 8,000 Miles (13,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 8,000 miles (13 000 km). ❏ Lube the front drive shaft fitting (4x4 only). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 16,000 Miles (26,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
M 450 MAINTENANCE SCHEDULES A I 24,000 Miles (39,000 km) or N T 18 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 24,000 miles (39 000 km). ❏ Lube the front drive shaft fitting (4x4 only). ❏ Inspect the CV joints. ❏ Inspect exhaust system.
MAINTENANCE SCHEDULES 451 M 40,000 Miles (65,000 km) or 30 Months Maintenance Service Schedule 48,000 Miles (78,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 40,000 miles (65 000 km). ❏ Lube the front drive shaft fitting (4x4 only). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code ❏ Change the engine oil and engine oil filter.
M 452 MAINTENANCE SCHEDULES A I 56,000 Miles (91,000 km) or N T 42 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 56,000 miles (91 000 km). ❏ Lube the front drive shaft fitting (4x4 only).
MAINTENANCE SCHEDULES 453 M 64,000 Miles (104,000 km) or 48 Months Maintenance Service Schedule ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ Change the engine oil and engine oil filter. Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 64,000 miles (104 000 km). Replace the engine air cleaner filter. Replace the spark plugs. Lube the front drive shaft fitting (4x4 only). Inspect the brake linings; replace if necessary. Adjust parking brake on vehicles equipped with four-wheel disc brakes.
M 454 MAINTENANCE SCHEDULES A I 72,000 Miles (117,000 km) or N T 54 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 72,000 miles (117 000 km). ❏ Lube the front drive shaft fitting (4x4 only). ❏ Inspect the CV joints. ❏ Inspect exhaust system.
MAINTENANCE SCHEDULES 455 M 88,000 Miles (143,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 88,000 miles (143 000 km). ❏ Lube the front drive shaft fitting (4x4 only).
M 456 MAINTENANCE SCHEDULES A I 96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule N ❏ Change the engine oil and engine oil filter. T E ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km). N ❏ Replace the engine air cleaner filter. A ❏ Replace the spark plugs. N ❏ Inspect and replace PCV valve if necessary.† C ❏ Lube the front drive shaft fitting (4x4 only).
MAINTENANCE SCHEDULES 457 M 104,000 Miles (169,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 104,000 miles (169 000 km). ❏ Lube the front drive shaft fitting (4x4 only). ❏ Flush and replace the engine coolant at 104,000 miles (169 000 km) or 60 months whichever comes first. ❏ Flush and replace power steering fluid.
M 458 MAINTENANCE SCHEDULES A I 120,000 Miles (195,000 km) or 90 Months Maintenance Service N T Schedule E ❏ Change the engine oil and engine oil filter. N ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 120,000 miles (195 000 km). A N ❏ Lube the front drive shaft fitting (4x4 only). C ❏ Inspect the CV joints. E ❏ Inspect exhaust system.
MAINTENANCE SCHEDULES 459 M 128,000 Miles (208,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 128,000 miles (208 000 km). ❏ Replace the engine air cleaner filter. ❏ Replace the spark plugs. ❏ Lube the front drive shaft fitting (4x4 only). ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes. ❏ Change the transfer case fluid.
M 460 MAINTENANCE SCHEDULES A I 144,000 Miles (234,000 km) or 108 Months Maintenance Service N T Schedule E ❏ Change the engine oil and engine oil filter. N ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 144,000 miles (234 000 km). A N ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the C engine air cleaner filter; replace if necessary. E ❏ Lube the front drive shaft fitting (4x4 only).
MAINTENANCE SCHEDULES 461 M † This maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 465 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . 467 ▫ Prepare For The Appointment . . . . . . . . . . . 465 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . 467 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . 465 䡵 Warranty Information . . . . . . . . . . . . . . . . . .
464 IF YOU NEED CONSUMER ASSISTANCE 䡵 Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 471 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 471 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . 471 ▫ Temperature Grades . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 465 the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the for an appointment. right papers with you. Take your warranty folder. All work to be performed may not be covered by the IF YOU NEED ASSISTANCE warranty.
466 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized • Vehicle delivery date and mileage dealer’s service manager first. Most matters can be reChrysler Group LLC Customer Center solved with this process. P.O. Box 21–8004 • If for some reason you are still not satisfied, talk to the Auburn Hills, MI 48321–8004 general manager or owner of the authorized dealer- Phone: (866) 726–4636 ship. They want to know if you need assistance. Chrysler Canada Inc.
IF YOU NEED CONSUMER ASSISTANCE 467 Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1–800–380–CHRY.
468 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to resolve any warranty issues or related concerns.
IF YOU NEED CONSUMER ASSISTANCE 469 If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. To contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– 9153), or go to http://www.safercar.
470 IF YOU NEED CONSUMER ASSISTANCE • Service Manuals These comprehensive Service Manuals provide the information that students and professional technicians need in diagnosing/troubleshooting, problem solving, maintaining, servicing, and repairing Chrysler Group LLC vehicles. A complete working knowledge of the vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts.
IF YOU NEED CONSUMER ASSISTANCE 471 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle. significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate.
472 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
474 INDEX Adding Engine Coolant (Antifreeze) . . . . . . . . . . 411 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 336 Adjustable Pedals . . . . . . . . . . . . . . . . . . . . . . . 155 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 401 Air Conditioner Maintenance . . . . . . . . . . . . . . . 403 Air Conditioning . . . . . . . . . . . . . . . . . . . . . . . . 257 Air Conditioning Controls . . . . . . . . . . . . . . . . . 257 Air Conditioning Refrigerant . . . . . . . . . . .
INDEX 475 Anti-Lock (ABS) . . . . . . . . . . . . . Automatic Transmission Fluid Check . . . . . . . . . . . . . . . . Adding Fluid . . . . . . . . . . . . . . . . . . . . . . . 422 Master Cylinder . . . . . . . . . . . . . Fluid and Filter Changes . . . . . . . . . . . . . . . 422 Parking . . . . . . . . . . . . . . . . . . . Fluid Level Check . . . . . . . . . . . . . . . . . 420,421 Warning Light . . . . . . . . . . . . . . . Fluid Type . . . . . . . . . . . . . . . . . . . . . . 420,443 Shifting . . .
476 INDEX Cargo Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 Cellular Phone . . . . . . . . . . . . . . . . . . . . . . . . 91,256 Center High Mounted Stop Light . . . . . . . . . . . . 437 Center Lap Belts . . . . . . . . . . . . . . . . . . . . . . . . . 48 Center Seat Storage Compartment . . . . . . . . . . . . 174 Certification Label . . . . . . . . . . . . . . . . . . . . . . . 338 Chart, Tire Sizing . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 477 Inspection . . . . . . . . . . . . . . . . Points to Remember . . . . . . . . Pressure Cap . . . . . . . . . . . . . . Radiator Cap . . . . . . . . . . . . . Selection of Coolant (Antifreeze) Cruise Control (Speed Control) . . . . Cupholders . . . . . . . . . . . . . . . . . . Customer Assistance . . . . . . . . . . . . . . . . . . . . . 413 . . . . . . . . . . 414 . . . . . . . . . . 412 . . . . . . . . . . 412 . . . . . . . 410,442 . . . . . . . . . . 158 . . . . . . . . . . 170 . . . . . . .
478 INDEX Jump Starting . . . . . . . . . . . . . . . . . . . . . . . 382 Tow Hooks . . . . . . . . . . . . . . . . . . . . . . . . . 387 Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389 Emission Control System Maintenance . . . . . . . . . 395 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393 Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . 401 Block Heater . . . . . . . . . . . . . . . . . . . . . . . . 275 Break-In Recommendations . . . . . . . . . .
INDEX 479 Fluid Level Checks Automatic Transmission . . . . . . . . . . . . . . . . 421 Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 416 Power Steering . . . . . . . . . . . . . . . . . . . . . . 299 Fluid, Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . 443 Fluids, Lubricants and Genuine Parts . . . . . . . . . . 442 Fog Lights . . . . . . . . . . . . . . . . . . . . . . . 148,198,436 Four Wheel Drive . . . . . . . . . . . . . . . . . . . . . . .
480 INDEX Heated Mirrors . . . . . . . . . . . . . . . . . . . . . . . 88,178 Heated Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257 Heater, Engine Block . . . . . . . . . . . . . . . . . . . . . 275 High Beam/Low Beam Select (Dimmer) Switch . . 152 Hands-Free Phone (uconnect™) . . . . . . . . . . . . . . 91 Hitches Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . 343 Hazard Hoisting . . . . . . . . . . . .
INDEX 481 Inside Rearview Mirror . . . . . . . . . . . . . . . . . . . . 83 Instrument Cluster . . . . . . . . . . . . . . . . . . . . 185,187 Instrument Panel and Controls . . . . . . . . . . . . . . 184 Instrument Panel Lens Cleaning . . . . . . . . . . . . . 427 Integrated Power Module (Fuses) . . . . . . . . . . . . 428 Integrated Trailer Brake Controls . . . . . . . . . . . . . 348 Interior Appearance Care . . . . . . . . . . . . . . . . . . 426 Interior Lights . . . . . . . . . . . . . . . . . . . .
482 INDEX Lights On Reminder . . . . . . . . . . . . . . . . . . 150 Brake Warning . . . . . . . . . . . . . . . . . . . . . . 195 Low Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 194 Bulb Replacement . . . . . . . . . . . . . . . . . . . . 434 Oil Pressure . . . . . . . . . . . . . . . . . . . . . . . . 196 Cap Top Clearance . . . . . . . . . . . . . . . . . . . 439 Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 Cargo . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 483 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Outside . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Rearview . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . 90 Modifications/Alterations, Vehicle . . . . . . . . . . . . . 7 . 402 Mopar Parts . . . . . . . . . . . . . . . . . . . . . . . . . 396,468 . 397 Multi-Function Control Lever . . . . . . . . . . . . . . . 151 . 446 .
484 INDEX Change Interval . . . . . . . . . . . . . . . . . . . . . 399 Dipstick . . . . . . . . . . . . . . . . . . . . . . . . . . . 398 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Filter . . . . . . . . . . . . . . . . . . . . . . . . . . 400,442 Filter Disposal . . . . . . . . . . . . . . . . . . . . . . . 400 Identification Logo . . . . . . . . . . . . . . . . . . . 399 Materials Added to . . . . . . . . . . . . . . . . . . . 400 Pressure Gauge . . . . . . . . . . . . . . . . .
INDEX 485 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Power Steering Fluid . . . . . . . . . . . . . . . . . . . . . 443 Pregnant Women and Seat Belts . . . . . . . . . . . . . . 51 Programmable Electronic Features . . . . . . . . . . . . 214 Programming Transmitters (Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . . 20 Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . . . . . 320 Radiator Cap (Coolant Pressure Cap) . . . . . . . 410,412 Radio Operation . . . . . .
486 INDEX Safety Checks Inside Vehicle . . . . . . . . . . . . . . . . . 76 Safety Checks Outside Vehicle . . . . . . . . . . . . . . . 78 Safety Defects, Reporting . . . . . . . . . . . . . . . . . . 468 Safety Information, Tire . . . . . . . . . . . . . . . . . . . 305 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Safety, Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . 75 Satellite Radio (uconnect™ studios) . . . . . . . . . . . 250 Satellite Radio Antenna . . . . . .
INDEX 487 Automatic Transmission . . . . . . . . . . . . . . . . 278 Transfer Case . . . . . . . . . . . . . . . . . . . . . . . 286 Transfer Case, Shifting into Transfer Case Neutral (N) . . . . . . . . . . . . . . . . . . . . . . 360,363 Transfer Case, Shifting out of Transfer Case Neutral (N) . . . . . . . . . . . . . . . . . . . . . . 362,365 Shoulder Belt Upper Anchorage . . . . . . . . . . . . . . 48 Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Signals, Turn . . . . . . . .
488 INDEX Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 Temperature Control, Automatic (ATC) . . . . . . . . 261 Temperature Gauge, Engine Coolant . . . . . . . . . . 187 Tether Anchor, Child Restraint . . . . . . . . . . . . . 67,70 Tilt Steering Column . . . . . . . . . . . . . . . . . . . . . 154 Tip Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273 Tire and Loading Information Placard . . . . . . 310,326 Tire Identification Number (TIN) . . . . . . . . . . .
INDEX 489 Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344 Recreational . . . . . . . . . . . . . . . . . . . . . . . . 358 Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344 Towing Assistance . . . . . . . . . . . . . . . . . . . . . . . 105 Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . . 340 Cooling System Tips . . . . . . . . . . . . . . . . . . 354 Hitches . . . . . . . . . . .
490 INDEX Vehicle Modifications/Alterations . . . . . . . . . . . . . . 7 Vehicle Storage . . . . . . . . . . . . . . . . . . . . . . . 267,433 Voice Recognition System (VR) . . . . . . . . . . . . . . 122 Voltmeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 Warning Lights (Instrument Cluster Description) . . . . . . . . . . . . . 187 Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . 6 Warranty Information . . . . . . . . . . . . . . . . . . . . . 468 Washers, Windshield .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
Chrysler Group LLC 11DD43-126-AG Seventh Edition Printed in U.S.A.
