Manual
Table Of Contents
- INTRODUCTION
- THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
- UNDERSTANDING YOUR INSTRUMENT PANEL
- INSTRUMENT CLUSTER — 3.5” EVIC
- INSTRUMENT CLUSTER — 7” EVIC
- INSTRUMENT CLUSTER DESCRIPTIONS
- ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — 3.5”
- Electronic Vehicle Information Center (EVIC) Displays
- Electronic Vehicle Information Center (EVIC) Messages
- EVIC Red Telltales
- EVIC Amber Telltales
- EVIC White Telltales
- EVIC Green Telltales
- Personal Settings (Customer-Programmable Features)
- Language
- Units
- Nav–Turn By Turn – If Equipped
- Park Assist System — If Equipped
- Tilt Mirror In Reverse
- Auto Wipers — If Equipped
- Hill Start Assist (HSA)
- Headlamp Off Delay
- Illuminated Approach
- Headlamps With Wipers
- Automatic High Beams — If Equipped
- Flash Lamps With Lock
- Auto Lock Doors
- Auto Unlock Doors
- Horn with Remote Start
- Sound Horn With Remote Lock
- Remote Unlock Sequence
- Key Fob Linked To Memory
- Keyless Enter-N-Go™ (Passive Entry)
- Remote Start Comfort Sys.
- Key-Off Power Delay
- Commercial Settings — If Equipped
- Trailer Select
- Trailer Brake Type
- Trailer Name
- Calibrate Compass
- Compass Variance
- STARTING AND OPERATING
- MAINTAINING YOUR VEHICLE
- MAINTENANCE SCHEDULE
- INDEX
21. Electronic Vehicle Information Center (EVIC) Menu
The Electronic Vehicle Information Center (EVIC) fea-
tures a driver-interactive display that is located in the
instrument cluster. For further information, refer to
“Electronic Vehicle Information Center (EVIC)”.
22. Electronic Stability Control (ESC) OFF Indicator
Light — If Equipped
This light indicates that the Electronic Stability
Control (ESC) is in Partial Off or Full Off mode.
23. TOW/HAUL
The TOW HAUL button is located on the center
stack upper switch bank. This light will illumi-
nate when TOW HAUL mode is selected.
24. Electronic Stability Control (ESC)
Activation/Malfunction Indicator Light — If Equipped
The “ESC Activation/Malfunction Indicator
Light” in the instrument cluster will come on
when the ignition switch is turned to the
ON/RUN position. It should go out with the
engine running. If the “ESC Activation/Malfunction In-
dicator Light” comes on continuously with the engine
running, a malfunction has been detected in the ESC
system. If this light remains on after several ignition
cycles, and the vehicle has been driven several miles
(kilometers) at speeds greater than 30 mph (48 km/h), see
your authorized dealer as soon as possible to have the
problem diagnosed and corrected.
3
UNDERSTANDING YOUR INSTRUMENT PANEL 23