Manual
Table Of Contents
- INTRODUCTION
- THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
- UNDERSTANDING YOUR INSTRUMENT PANEL
- INSTRUMENT CLUSTER — 3.5” EVIC
- INSTRUMENT CLUSTER — 7” EVIC
- INSTRUMENT CLUSTER DESCRIPTIONS
- ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — 3.5”
- Electronic Vehicle Information Center (EVIC) Displays
- Electronic Vehicle Information Center (EVIC) Messages
- EVIC Red Telltales
- EVIC Amber Telltales
- EVIC White Telltales
- EVIC Green Telltales
- Personal Settings (Customer-Programmable Features)
- Language
- Units
- Nav–Turn By Turn – If Equipped
- Park Assist System — If Equipped
- Tilt Mirror In Reverse
- Auto Wipers — If Equipped
- Hill Start Assist (HSA)
- Headlamp Off Delay
- Illuminated Approach
- Headlamps With Wipers
- Automatic High Beams — If Equipped
- Flash Lamps With Lock
- Auto Lock Doors
- Auto Unlock Doors
- Horn with Remote Start
- Sound Horn With Remote Lock
- Remote Unlock Sequence
- Key Fob Linked To Memory
- Keyless Enter-N-Go™ (Passive Entry)
- Remote Start Comfort Sys.
- Key-Off Power Delay
- Commercial Settings — If Equipped
- Trailer Select
- Trailer Brake Type
- Trailer Name
- Calibrate Compass
- Compass Variance
- STARTING AND OPERATING
- MAINTAINING YOUR VEHICLE
- MAINTENANCE SCHEDULE
- INDEX
Power Take-Off Settings
When this feature is selected, the PTO mode and Param-
eters can be adjusted. The To make your selection, scroll
up or down until PTO Mode or Parameters is high-
lighted, then press and release the SELECT button to
enter that feature. Once PTO Mode or Parameters is
selected, use the UP/DOWN buttons to scroll through
the sub-menus.
PTO Mode Sub-Menus:
• Standard
• Remote
• Mobile
Parameters Sub-Menus:
• Single Set RPM
• Remote RPMs
• Auto Resume
• Max Speed
To make your selection, scroll up or down until the
preferred setting is highlighted, then press and release
the SELECT button until a check-mark appears next to
the setting, showing that the setting has been selected.
AUX Switch Settings
When this feature is selected, the Auxiliary Switch set-
tings can be adjusted. Once AUX Switches is selected, use
the UP/DOWN buttons to scroll through the sub-menus.
AUX Switch Sub-Menus:
• Type
• Latching (stays active after the button is pressed)
• Momentary (is only active when the button is held
down)
44 UNDERSTANDING YOUR INSTRUMENT PANEL