User Guide Instruction Manual

Uconnect® 3.0

Clock Setting

1. Press the Menu button at the bottom of the radio, and push the Enter/Browse

button for System Settings. Next, select the Time and Format setting and then

select Set Time by pushing the Enter/Browse button.

2. Adjust the hours or minutes by turning the Tune/Scroll knob, then pressing the

Enter/Browse button to move to the next entry. You can also select 12hr or 24hr

format by turning the Tune/Scroll knob, then pressing the Enter/Browse button on

the desired selection.

3. Once the time is set press the “Back” button to exit the time screen.

Audio

• Press the AUDIO button on the radio faceplate.

• The Audio Menu shows the following options for you to customize your audio

settings.

Treble, Mid, Bass, Fade, Balance, Speed Adjusted Volume, Loudness and Auto Volume

Offset

• Select the desired setting to adjust, then push the ENTER/BROWSE button. Turn

the TUNE/SCROLL knob to adjust the setting + or - 9. Press the “Back” button

when done.

ELECTRONICS