Owner Manual User Manual

If you prefer, you can set ⬙Auto Switch⬙ to ⬙ON⬙ (see
SETUP MENU section). The radio will then follow two
parameters: ignition and previous state. If the ignition is
turned off with the radio on, the radio will be turned off,
but will come on again when the ignition is turned on.
When it is turned on, the radio will display a greeting
message. When it is turned off, the radio will display the
message ⬙GOOD BYE⬙ before it switches off.
Audio
You can use the AUDIO button to access the available
audio settings (described in the sections below).
Equalizer
Pressing the AUDIO button for more than two seconds
activates the audio equalizer functions in the following
sequence: FLAT
POP ROCK CLASSIC
VOCAL JAZZ USER FLAT. Press AUDIO
repeatedly to change the equalization. If this button is
not pressed again within five seconds, or if you press
the ROTARY knob, the display returns to the previ-
ously selected view and the settings will be saved.
Custom Audio Setting Functions
Press the AUDIO button for less than two seconds to
activate the Balance function.
Repeatedly pressing the AUDIO button activates the
other custom audio setting functions in the following
sequence: Bass
Treble Balance Fader Loud-
ness Bass. If this button is not pressed again within
five seconds, or if you press the ROTARY knob, the
display returns to the previously selected view and the
settings will be saved. USER equalization must be
selected to activate the Bass and Treble functions.
Bass
The display will show ⬙BASS 00⬙ to indicate that the Bass
function can be set. To increase the bass level, turn the
4
UNDERSTANDING YOUR INSTRUMENT PANEL 151