User Guide

FLUID CAPACITIES — DIESEL ENGINE
U.S. Metric
Fuel (Approximate)
3.0L Diesel Engine 24 Gallons 90 Liters
Diesel Exhaust Fluid Tank 5 Gallons 18.9 Liters
Engine Oil with Filter
3.0L Diesel Engine 9.5 Quarts 9.0 Liters
Cooling System *
3.0L Diesel Engine With MTA Trans-
mission (MOPAR
®
Antifreeze/Engine
Coolant 10 Year/150,000 Mile Formula
or equivalent)
12.7 Quarts 12 Liters
* Includes heater and coolant recovery bottle filled to MAX level. Add 2.9 Qts (2.8 L)
if equipped with a rear heater.
FLUIDS, LUBRICANTS AND GENUINE PARTS — DIESEL ENGINE
Engine
Component Fluid, Lubricant, or Genuine Part
Engine Coolant
We recommend you use MOPAR
®
Antifreeze/Coolant 10 Year/
150,000 Mile Formula OAT (Organic Additive Technology).
Engine Oil Only use ACEA C3 5W-30 Synthetic Low Ash engine oil
meeting Chrysler material standard MS-11106 or Pennzoil
Ultra Euro L full synthetic 5W-30 motor oil.
Engine Oil Filter We recommend you use MOPAR
®
Engine Oil Filters.
Fuel Filter We recommend you use MOPAR
®
Fuel Filter. Must meet
3 micron rating. Using a fuel filter that does not meet the
manufacturers filtration and water separating requirements can
severely impact fuel system life and reliability.
Fuel Selection Use good quality diesel fuel from a reputable supplier in
your vehicle. Federal law requires that you must fuel this
vehicle with Ultra Low Sulfur Highway Diesel fuel (15 ppm
Sulfur maximum) and prohibits the use of Low Sulfur
Highway Diesel fuel (500 ppm Sulfur maximum) to avoid
damage to the emissions control system. For most year-
round service, No. 2 diesel fuel meeting ASTM specification
D-975 Grade S15 will provide good performance. We rec-
ommend you use a blend of up to 5% biodiesel, meeting
ASTM specification D-975 with your diesel engine.
This vehicle is compatible with biodiesel blends greater than
5% but no greater than 20% biodiesel meeting ASTM specifi-
cation D-7467 provided the shortened maintenance intervals
are followed as directed.
MAINTAINING YOUR VEHICLE
80