Specifications

16 Program window
5 Program window
The Miray RAM Drive program window is dis-
played at startup and can always be accessed
from the system tray (46 Tray icon). The pro-
gram window has three layouts (4
Fig. 9),
which correspond to the different states of
the RAM drive: Active (45.2 Active RAM
drive), inactive (45.1 Inactive RAM drive)
and inactive in persistence mode (45.3 Inac-
tive RAM drive (persistence)). The applica-
tion window is not displayed when it is not
needed. You can open it via the system tray
(46 Tray icon).
5.1 Inactive RAM drive
Whilst the RAM drive is inactive, the program window shows a
slider (4
Fig. 11) next to the Miray RAM Drive icon and the On/
Off button; the slider can be used to adjust the capacity of the
RAM drive.
5.1.1 Adjust the capacity
The capacity of the RAM drive can be adjust-
ed with the slider (4
Fig. 11), before the RAM
drive is switched on. The value markers on the
slider are based on the maximum available
memory for the RAM drive, and they adapt
automatically to the available space. There are
three different ways of setting the desired ca-
pacity:
Fig. 9: Program window states
Fig. 10: Inactive
Fig. 11: Slider