Specifications

20 Program window
5.3.1 Setting the capacity (persistence)
Changing the capacity of a persistent RAM
drive causes the deletion of that drive and the
setting up of a new one with the desired ca-
pacity; thus, any data previously saved on the
drive is lost. Please follow these steps, if you
wish to change the capacity of the drive in
persistence mode:
{
Disable the persistence mode (47.5.3 Per-
sistence).
{
Switch off the RAM drive.
{
The program window displays the slider: set the new desired capacity (45.1.1
Adjust the capacity).
{
Turn on the RAM drive again and reactivate persistence mode; you will be
presented with a new blank RAM drive with the new capacity.
Note: If required, back up or copy your data before turning off the RAM
drive. The data can be restored on the new RAM drive after resizing.
5.3.2 Turning on the RAM drive (persistence)
The program window appears different in persistence mode
than without persistence when the RAM drive is inactive. The
RAM drive can be turned on using the button from the bot-
tom of the window (4
Fig. 18).
In persistence mode, Miray RAM Drive automatically loads the
data from the persistence file to the RAM drive. After the transfer is complete,
the RAM drive is available with the same content it had before being switched
off.
Fig. 17: Persistence settings
Fig. 18: On/Off