Specifications

34 Troubleshooting
10.3.2 Insufficient disk space
Explanation: In order to make the RAM drive
persistent, its contents will be saved to the
persistence file when switching it off. This file
has the same size as the RAM drive. If there is
not enough free space on the specified drive,
this error message will appear (4
Fig. 40).
Solution: There are two ways to fix this:
{
Create enough free space on the specified
drive, for example by deleting files.
{
Change the location of the persistence file to another drive with sufficient free
disk space.
10.3.3 Error opening persistence file
Explanation: When the persistence mode is
enabled and Miray RAM Drive is started
(manually or automatically), it will immediate-
ly attempt to open the persistence file in or-
der to initialize the RAM drive. If the persis-
tence file is available, but it cannot be
accessed, this error message will appear
(4
Fig. 41).
Solution: The persistence file is likely to have
been opened by another application. Make sure that the persistence file is
closed and turn on the RAM drive again.
10.3.4 Persistence file damaged
Explanation: If the persistence file is available
and accessible, but the data stored within is
invalid, for example, because the file has
been modified by another program or has be-
come corrupted, this error message will ap-
pear (4
Fig. 42).
Solution: You have three options:
{
Click Cancel to restore the original state of
Fig. 40: Persistence file too large
Fig. 41: Problem opening the file
Fig. 42: Persistence file damaged