Specifications

Persistence file problems 35
the persistence file and restart the RAM drive.
{
Create persistence file will start the RAM drive with a newly created persis-
tence file.
{
To start the RAM drive without persistence, click Deactivate persistence.
10.3.5 Persistence file not found
Explanation: This message (4Fig. 43) ap-
pears when Miray RAM Drive is switched on
manually (45.1.2 Turning on the RAM drive)
or automatically (44.2 Autostart), but the
persistence file in the set file path cannot be
found; as such, the RAM drive cannot be ini-
tialized.
Solution: The persistence file is likely to have
been moved, renamed or deleted. You have three options:
{
If the persistence file has been moved or renamed, you can specify the new
file path and/or file name using the Persistence settings
button.
{
Alternatively, select Cancel, move the persistence file back to its original loca-
tion or rename it with its original name, and restart the RAM drive.
{
If the persistence file was deleted, select the Create persistence file, button to
start the RAM drive with a newly created persistence file.
10.3.6 Error saving the persistence file
Explanation: When quitting Miray RAM Drive
in persistence mode, the contents of the RAM
drive are saved in the persistence file. If sav-
ing fails for any reason, this error message will
appear (4
Fig. 44).
Solution: The persistence file is likely to be
opened by another program. You have three
options:
{
Select No, meaning not to switch off the
RAM drive. Make sure that the persistence
file is not opened by any other program, and retry.
{
Select No, meaning not to switch off the RAM drive. Change the persistence
Fig. 43: Persistence file not found
Fig. 44: Error saving the persistence
file