Specifications

Chapter 2 Connecting Peripherals 23
Important: Make sure that the ATX power supply can take at
least a 720 mA load on the 5 V standby lead (5VSB).
If not, you may have difficulty powering on your
system and/or supporting the "Wake-on-LAN"
function.
2.13.2 Controlling the soft power switch
Users can also identify the current power mode through the system's
power LED (see Section 2.13.1).
2.14 LCD Connector (CN41)
This 40-pin connector supports an 18-bit TFT LCD.
2.15 LCD Inverter Power Connector (CN42)
The LCD inverter is connectoed to CN42 via a 5-pin connector to
provide +12 V power to the LCD display. The pin assignments for
CN42 can be found in Appendix B.
2.16 AC-97 Audio Interface (CN43)
This interface can be used to connect to the PCA-AUDIO audio
extension module for the audio function.