Specifications

42 PCA-6004 User’s Manual
3.8.5 Power On by Modem
When enabled, an input signal on the serial Ring Indicator (RI) line (in
other words, an incoming call on the modem) awakens the system from
a soft off state. The Choice: Enable, Disable.
3.8.6 Power On by Alarm
When enabled, you can set the date and time at which the RTC (real-
time clock) alarm awakens the system from Suspend mode. The
Choice: Enable, Disable.
3.9 PnP/PCI Configurations
3.9.1 PnP OS Installed
This features allows you to install the PnP OS. The commands are
“yes” or “no.”
3.9.2 Reset Configuration Data
Note: This is left “Disabled.” Select “Enabled” to reset
Extended System Configuration Data (ECSD) if you
have installed a new add-on and your OS won’t boot
and you need to reconfigure.
Figure 3-8: PnP/PCI configurations screen