Owners manual

Page 1 of 1
Installation Instructions
I-GD-75001 Rev.A
Important Safety Information
Tools Required
Contents
Fuel Door
NOTE: Actual product may vary from illustration.
Installation Steps
1
Place the gas door over the filler opening, so that the door opens
towards the front of the vehicle.
Apply firm constant pressure to keep gas door against the side of the
vehicle. Begin inserting the first screw (#4 x 0.25” Self tapping Phil-
lips flat head screws) using the top hole of the door, then proceed
in a clockwise manner to the next hole. See below. The screw will
penetrate the plastic housing directly in the center of the ring.
800-241-7219 • Visit us at Rampageproducts.com
Rampage Products is a trademark of Lund International, Inc
Care and Cleaning
• Rampage parts are built to last; any detergent you use to wash your vehicle is sufficient to clean the fuel0 door. Do not use any
harsh abrasive detergents. Periodically check and lubricate moving parts.
Congratulations!
You have purchased one of the many quality Rampage branded products offered by Lund International, Inc. We take the utmost pride in
our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product
is top quality in terms of fit, durability, finish and ease of installation.
2
• CAUTION - Before driving, ensure that the part is properly secured to vehicle.
• Periodically check all components for tightness.
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Phillips head screwdriver
Keys For Locking Version
(qty 2)
Phillips Screw Self-Tapping
(qty 8)
GAS Door (Non-locking shown)
(qty 1)
Part No. 75001, 75007, 85001, 85007, 750138, 750152
07-17 Jeep Wrangler 4dr/2dr
1
2
3
4
FRONT

Summary of content (3 pages)