Owners manual

Installation Instructions

Acoustic Brief /California Brief

1976-1991 Wrangler

Included Components:

1- Brief

If your Wrangler does not have a soft top Windshield Channel, your installation requires the purchase of

an aftermarket Windshield Channel

(

Ram

e Products Part # 90101

)

Before you begin, the temperature of the Brief should be above 70 degrees Fahrenheit. We suggest laying the

Brief in the sunlight for 1 hour before installation.

Figure 1

1. Locate the front edge an

d fold over (Figure 1).

Place the Brief on top of Jeep. Insert

folded edge into Windshield Channel, working from one side of

vehicle to the other (Figures 2 & 3).

Figure 2

Figure 3

Part 8908XX,908XX Page 1 of 2

PAGE 1
Installation Instructions Acoustic Brief /California Brief 1976-1991 Wrangler Included Components: 1- Brief If your Wrangler does not have a soft top Windshield Channel, your installation requires the purchase of an aftermarket Windshield Channel (Rampage Products Part # 90101) Before you begin, the temperature of the Brief should be above 70 degrees Fahrenheit. We suggest laying the Brief in the sunlight for 1 hour before installation. 1. Locate the front edge and fold over (Figure 1). Figure 1 2.
PAGE 2
3. Lay the back of the Brief over the central roll bar and pull the rear corner straps. Loop the straps around the rear side roll bar and attach to mating buckle (Figure 4). 4. Locate the Velcro straps on each side of the roll bar. Wrap the straps around roll bar and fasten. Do both the driver and passenger sides of the vehicle (Figure 5). 5. Locate the center strap along the central roll bar.