Owners manual

3) Fold the plastic strip under and insert into windshield channel (Figure 2 & 3). Center
the Combo Top in the channel by pulling from either side as necessary.
WINDSHIELD
CHANNEL
WINDSHIELD FRAME
ISLAND
TOPPE
R
Figure 3 Figure 2
4) Pull the center strap around center roll bar and pull back toward windshield and attach
to Factory Footman’s Loop.
5) Loosely wrap the Velcro straps around the roll bar (Figure 4). Attach Loosely.
6) Pull the Combo Top towards the rear of the Jeep and along the rear roll bar.
7) Insert the two Long straps through the J-Hooks and thread through the Buckle
pulling them tight (Figure 5).
Figure 4 Figure 5
94xxx Page 2 of 3 06/07