Owners manual

8) Once the J-Hooks are attached to the rear harness, place the J-Hooks under the
rear lip of the Jeep and tighten (Figure 6).
Figure 6
9) Once the Rear J Hooks are attached, you can go back and wrap the remaining
straps around top of center roll bar posts and secure.
10) Now go back to the side straps and pull each of the side straps tight, working from
the front of the vehicle towards the rear. May be necessary to re-tighten the straps
after driving.
For Technical Support, please call: 951-277-4949
Rampage Products 9225 Stellar Ct Unit C, Corona, CA 92883
Phone: [phone] Fax: [phone]
e-mail: [e-mail]
Web: www.rampageproducts.net
Made in China
94xxx Page 3 of 3 06/07