MSDS

ManualsBrandsRamset ManualsTools & Hardware0.22 Caliber Brown Single Shot Powder Loads (100 per Pack)

700 High Grove Blvd. • Glendale Heights, IL 60139 • www.ramset.com

MSDS

MSDS # 00055.0001

MATERIAL

SAFETY DATA

SHEET

Olin MSDS No.: 00055.0001

Revision No.: 13

Revision Date: 1/18/08

Supercedes: 8/24/07

1. PRODUCT AND COMPANY IDENTIFICATION

Product Name: CARTRIDGES FOR POWER DEVICES

Chemical Name:

Mixture – Metal Alloy

Synonyms:

Rimfire Cartridge for Power Device, 22, 25, 27 Caliber Powertool Round, Power Load, Blank Power

Load and/or Booster, Powder Load, Centerfire Powertool Loaded Round 32, 38 Caliber

Chemical Family:

Metal mixture

Formula:

Not applicable - mixture

Product Use/ Description:

Powertool Loaded Round

COMPANY ADDRESS

MSDS Control Group

Olin Brass and Winchester, Inc.

427 North Shamrock St.

East Alton, IL 62024-1197

www.winchester.com

TECHNICAL

INFORMATION:

618-258-3507

EMERGENCY TELEPHONE

NUMBER:

1-888-2891-911

2. COMPOSITION / INFORMATION ON INGREDIENTS

EU Classification

CAS Number Components % By Weight

EINECS/ ELINCS #

Symbol R-Phrase

7439-89-6 Iron 0 – 97 231–096-4 None None

7440-50-8 Copper 50 - 65 231-159-6 None None

7440-66-6 Zinc 15 - 32 231-175-3 F (as dust or

powder)

R 15-17

9004-70-0 Nitrocellulose 7 - 13 Not listed E* R 1-3

55-63-0 Nitroglycerin 0.5 - 2 200-240-8 E, T+, N R 3-26/27/28-33-

51-53

84-74-2 Dibutyl phthalate 0.5 - 2 201-55-74 T,N R61-50-62

15245-44-0 Normal Lead

styphnate

0.1 - 1 239-290-0 E, T, N R61-3-20/22-33-

50/53-62

*This material is not listed in Annex 1 of Directive 88/379/EEC. Olin has classified the material according to the conventional method based

upon information from similar materials.

OSHA REGULATORY STATUS: Explosive

3. HAZARDS IDENTIFICATION

CAUTION!

EXPLOSIVE. KEEP AWAY FROM HEAT. DO NOT SUBJECT TO MECHANICAL SHOCK. PARTICLES FROM FIRING MAY BE

HARMFUL IF INHALED. DO NOT TAKE INTERNALLY.

HAZARD RATINGS (for dust or fume)

Degree of hazard (0 = low, 4 = extreme)

Hazardous Materials Identification System (HMIS)

Health: 0 Flammability: 0 Physical Hazard:

Explosive: 2

National Fire Protection Association (NFPA)

Mixture. Not rated.

HUMAN THRESHOLD RESPONSE DATA

Odor Threshold:

Unknown

Irritation Threshold:

Unknown

Immediately Dangerous to Life or Health (IDLH) Value(s):

The IDLH for this product is not known. The IDLH for dibutyl phthalate

is 4000 mg/m

. The IDLH for copper and lead is 100 mg/m

. The IDLH

for nitroglycerin is 75 mg/m

Powder Loads

Summary of content (6 pages)

PAGE 1
MSDS Powder Loads MATERIAL SAFETY DATA SHEET Olin MSDS No.: 00055.0001 Revision No.: 13 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Chemical Name: Synonyms: Chemical Family: Formula: Product Use/ Description: COMPANY ADDRESS 2.
PAGE 2
MSDS Powder Loads Page 2 of 6 POTENTIAL HEALTH EFFECTS This product is composed of a finished metal alloy cartridge which contains the various components completely sealed within. Therefore, under normal handling of this product, no exposure to any harmful materials will occur. When the product is fired, a small amount of particles may be generated which may be slightly irritating to the eyes and the respiratory tract.
PAGE 3
MSDS Powder Loads Page 3 of 6 CONDITIONS TO AVOID: 8. Mechanical impact or shock and electrical discharge. Cartridges placed in a high radio frequency energy field (radar stations).
PAGE 4
MSDS Powder Loads Page 4 of 6 11. TOXICOLOGICAL INFORMATION POTENTIAL EXPOSURE ROUTES: The physical nature of this product makes absorption from any route unlikely. A small amount of inhalable particles may be created when projectile is fired. ACUTE ANIMAL TOXICITY DATA: For Product: For Components Oral LD50 Not applicable for product Dermal LD50 Not applicable for product Inhalation LC50 Not applicable for product. Particles generated from firing may be slightly toxic.
PAGE 5
MSDS Powder Loads Page 5 of 6 13. DISPOSAL CONSIDERATIONS Care must be taken to prevent environmental contamination from the use of this material. The user of this material has the responsibility to dispose of unused material, residues and containers in compliance with all relevant local, state and federal laws and regulations regarding treatment, storage and disposal for hazardous and nonhazardous wastes. 14. TRANSPORT INFORMATION U.S.
PAGE 6
MSDS Powder Loads Page 6 of 6 IDL: WHMIS: 16. Copper, Dibutyl phthalate This product is not subject to WHMIS. It is regulated as a Class 6 Explosive in Canada. OTHER INFORMATION New International format, toxicology review – 1/1/03 REVISIONS: PREPARED BY: Olin Corporation Additional information available from: www.winchester.com OTHER: NOTICE: THE INFORMATION IN THIS MSDS SHOULD BE PROVIDED TO ALL WHO WILL USE, HANDLE, STORE, TRANSPORT, OR OTHERWISE BE EXPOSED TO THIS PRODUCT.