MSDS

700 High Grove Blvd. • Glendale Heights, IL 60139 • www.ramset.com
MSDS
Page 2 of 6
MSDS No.: 00055.0001
POTENTIAL HEALTH EFFECTS
This product is composed of a finished metal alloy cartridge which contains the various components completely sealed within.
Therefore, under normal handling of this product, no exposure to any harmful materials will occur.
When the product is fired, a small amount of particles may be generated which may be slightly irritating to the eyes and the
respiratory tract. The particles may contain trace amounts of these harmful substances:
Copper: Inhalation of high concentrations of metallic copper dusts or fumes may cause nasal irritation and/or nausea, vomiting and
stomach pain.
Nitroglycerin: Will produce dilation of blood vessels and drop in blood pressure which may affect the heart. It has also been shown to
cause methemoglobinemia (cyanosis).
Lead: Ingestion of large amounts of lead can cause abdominal pain, constipation, cramps, nausea and/or vomiting. Chronic
exposure to lead can cause kidney damage, anemia, reproductive effects, developmental effects and permanent nervous system
damage in humans including changes in cognitive function.
It is unlikely that the amount of particles that someone would be exposed to from firing would be sufficient to cause any of these
effects.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: There are no medical conditions known to be aggravated by exposure to
this product in its solid form. Exposure to lead can aggravate anemia, cardiovascular and respiratory disease.
POTENTIAL ENVIRONMENTAL EFFECTS:
Product has not been tested for environmental properties. Lead has been shown
to be toxic to aquatic species.
4. FIRST AID MEASURES
EYE CONTACT: Immediately flush out fume or particles with large amounts of water for at least 15 minutes, occasionally lifting
the upper and lower eyelids. If eye irritation develops, call a physician at once.
SKIN CONTACT: Wash skin with plenty of soap and water.
INHALATION: If symptoms of lung irritation occur (coughing, wheezing or breathing difficulty), remove from exposure area to
fresh air immediately. If breathing has stopped, perform artificial respiration. Keep affected person warm and at
rest. Get medical attention.
INGESTION:
If ingested, immediately call a physician.
5. FIRE FIGHTING MEASURES
PROPERTY VALUE PROPERTY VALUE
Explosive Yes Flammable Not applicable
Combustible Not applicable Pyrophoric No
Flash Point (qC):
Not applicable Burning Rate of Material: Not applicable
Lower Explosive Limit: Not applicable Autoignition Temp.: No data
Upper Explosive Limit: Not applicable Flammability Classification: (defined by 29 CFR 1910.1200) Explosive
UNUSUAL FIRE AND EXPLOSION HAZARDS: If fire reaches cargo, do not fight. Evacuate all person, including emergency
responders from the area for 1500 feet (1/3 mile) in all directions.
EXTINGUISHING MEDIA: Flood area with water. If no water is available, carbon dioxide, dry chemical or
earth may be used. If the fire reaches the cargo, withdraw and let fire burn.
SPECIAL FIREFIGHTING PROCEDURES: In case of fire, use normal fire fighting equipment. Protection concerns must also
address the potential of the physical characteristic of this product as explosive.
6. ACCIDENTAL RELEASE MEASURES
FOR ALL TRANSPORTATION ACCIDENTS, CALL CHEMTREC AT 800-424-9300.
Spills of this material should be handled carefully. Do not subject materials to mechanical shock. A spill of this material will normally
not require emergency response team capabilities. If, however, a large spill occurs, call 1-888-289-1911 for technical assistance.
7. HANDLING AND STORAGE
HANDLING
: No special requirements
STORAGE
: No special requirements
Shelf Life Limitations: Not known
Incompatible Materials for Packaging: None known
Incompatible Materials for Storage or Transport:
Acids, Class A & B explosives, strong oxidizers, and caustics
Powder Loads