Repair manual

TRAKFAST REPAIR MANUAL

Rev. 09/07

TOOL REASSEMBLY

Housing Assembly - (cont’d)

Slide Handle Assembly into Housing.

Keep Handle Assembly straight so that the fan does not hit the

inside of Chamber.

Line up Cam with Housing.

Place Cam Bushing inside the Cam and Housing.

Note position of Cam in Housing.

Secure with screw. Screwdriver or similar tool may be needed to

help align Trigger Cam.

Be sure Cam Bushing goes through hole in Trigger Cam and the

hex head of the Bushing is properly seated in the hex recess on

the Handle.

Place Cap Assembly on Housing.

Replace any damaged parts.

Secure with screws.

Replace Foam Filter if dirty or torn.