When pulling a heavy load, place a blanket, jacket or tarpaulin over the cable five or six feet from the hook. It will slow the snap back in the event of a broken cable. Also, open the vehicle hood for additional protection. Techniques of Operation The best way to get acquainted with how your winch operates is to make a few test runs before you actually need to use it. Plan your test in advance. Remember you hear your winch as well as see it operate.
Attach fairlead to channel using hardware furnished with winch. Attach winch to channel. Place (4) flatwashers and nuts into pockets of winch mounting feet and thread capscrews with lockwashers through mounting holes in channel and into hardware in winch feet (see FIGURE 1). Installation The winch shown in this owners manual is solely and exclusively designed for vehicle mounted, non-industrial applications. All other applications will void warranty.
strands and replace if necessary. If the cable becomes worn or damaged, it must be replaced. Operating Instructions The winch clutch allows rapid unspooling of the wire rope for hooking onto the load or anchor point. The clutch is operated by the shifter knob located on the gear housing end of the winch as follows: Corrosion on electrical connections will reduce performance or may cause a short. Clean all connections especially in remote control switch and receptacle.
PLATINUM 9000 16 41 39 4 33 37 17 21 7 15 6 40 27 3 32 21 42 35 14 5 42 1 29 28 20 34 36 38 30 8 29 13 2 12 38 25 21 19 23 31 21 42 10 43 22 18 18 11 24 Winch Parts List Platinum 9000 ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 QTY 1 1 1 1 1 1 1 1 PART NO.
NOTES
NOTES
NOTES
