Owner manual

INSTRUCTIONS FOR OVERHAUL OF RAMSEY WINCH MODEL RPH-8000-Y

DISASSEMBLY

Remove frame assembly (item #2) by unscrewing (8) capscrews (item #19). Remove breather plug

and reducer (item #35 & #40) from winch. Drain oil from winch by removing plug (item #41).

Remove motor (item #36), coupling (item #32) from winch by unscrewing capscrews (item #25). If

coupling is being replaced, be sure pin (item 42) is installed. Tap motor lightly to disengage.

Replace all o-rings and seals with new ones during re-assembly (order kit #246042). If necessary,

remove valve (item #50) from motor by removing capscrews (item #22) and lockwashers (item #53).