Use and Care Manual

12
MODES OF OPERATION
FAN MODE
DRY MODE
The system can be set to run in FAN mode,
providing ventilation only.
To run the system in FAN mode, press the MODE
button until the FAN symbol appears on the
display. Pressing the FAN button while in this mode
changes the fan speed to LOW, MEDIUM, HIGH,
or AUTO.
The remote control will automatically save the last
fan speed setting from the previous time the system
was in operation.
In FEEL mode (automatic), the air conditioner will
automatically select the appropriate fan speed and
mode of operation, COOL or HEAT (if available).
The system can also be set to run in DRY mode,
reducing the humidity of the air in the room for
increased comfort.
To run the system in DRY mode, press the MODE button
until the DRY symbol appears on the display. The air
conditioner will automatically cycle between cooling and
fan only modes to dehumidify the air.