Use and Care Manual

8.CONNECT TOOL TO AIR SUPPLY
HOSE with a coupling that removes all
pressure from the tool when the
coupling is disconnected. Fig.4.
9.DISCONNECT TOOL FROM AIR
SUPPLY HOSE before doing tool
maintenance, clearing a jammed
fastener, leaving work area, moving
tool to another location, handing the
tool to another person, or making
adjustments. Fig.5.
10.NEVER USE A TOOL that is
leaking air, has missing or damaged
parts, or requires repair. Make sure all
screws and caps are securely
tightened.
11.DO NOT USE TOOL WITHOUT
SAFETY WARNING LABEL. If label is
missing, damaged or unreadable,
contact your Service Center for a
replacement. Fig.6.
12.ONLY USE PARTS, FASTENERS,
recommended by us.
13.REMOVE ALL FASTENERS from
tool before connecting to air supply.
The tool’s driving mechanism may
cycle when tool is connected to the air
supply. F i g . 7 .
Fig.4
Fig.6
Fig.5
Fig.7
2
WARNING
TO PREVENT SERIOUS INJURY
FROM FASTENERS AND FLYING
DEBRIS:
READ OPERATION MANUAL
OPERATOR AND OTHERS IN
WORK AREA SHOULD ALWAYS
WEAR SAFETY GLASSES
DIS CONNECT AIR WHEN
CLEARING A JAMMED STAPLE
OR TOOL NOT IN USE
DO NOT USE OXYGEN OR
COMBUSTIBLE GASES
DO NOT EXCEED 120 PSI
1
2
EXPLODED VIEW DRAWING
11