Product Brochure

Ratings & Specifications
A
S
M
E
H
MADE IN
U.S.A.
Ratings
Model
Input
1
(MBH)
DOE Heating
Capacity
(MBH)
AHRI
Net Rating
2
(MBH)
AFUE
(%)
RRG067E 67 56 49 84.0
RRG100E 100 84 73 84.0
RRG134E 134 113 98 84.0
RRG167E 167 140 122 84.0
RRG201E 201 169 147 84.0
RRG234E 234 197 171 84.0
RRG268E 268 225 196 84.0
Supply
Gas
Return
27”
18”
16”
6”*
9”
20”
26.5”
0”
0”
Floor Line
32.5”
43”**
A
4” 1”
8”
Standard Equipment
• Fully packaged
• Insulated powder coated steel jacket
• Draft hood, damper and harness
• Heavy gauge 1” base insulation
• Integrated boiler control
• Step-opening redundant gas valve
• Spark ignition with continuous retry
• User-friendly wiring with 120V J-box
• LWCO (IDL-1200) pre-installed with
high limit sensor in dual-purpose well
• ECM Circulator – Taco 007e
• Cast iron section assembly
• Resettable blocked vent switch
• Boiler drain valve
• Cast iron supply manifold with safety
relief valve tapping
Conversion Kits
Fuel 0-2000 ft. 2,001-5,400 ft. 5,401-10,000 ft.
Nat.Gas Factory Standard 109999-01 110000-01
LP Gas
109997-01 (3-6 sections) 110001-01 (3-6 sections) 110002-01 (3-6 sections)
109997-02 (7-9 sections) 110001-02 (7-9 sections) 110002-02 (7-9 sections)
NOTE: Boilers are shipped for natural gas combustion only for elevations from sea level to 2000 feet.
Conversion kits are required for LP combusion and higher elevations (see below).
1. Input ratings can be used for elevations up to 2,000 feet.
Refer to IO&S manual appendix “High Altitude Installations”
for installations above 2,000 feet.
2. The net AHRI water ratings shown are based on a piping and
pickup allowance of 1.15. The manufacturer should be
consulted before selecting a boiler for installations having
unusual piping and pickup requirements, such as
intermittent operation, extensive piping systems, etc.
Dimensions (inches)
Model Sections Depth A Vent Gas NPT
RRG067E 3 27 14 4 1/2
RRG100E 4 27 16 5 1/2
RRG134E 5 27 19 6 1/2
RRG167E 6 27 22 6 1/2
RRG201E 7 27 25 7 3/4
RRG234E 8 27 28 7 3/4
RRG268E 9 27 31 8 3/4
Weights (lbs.) & Volume (gal.)
Model Ship Wt. Empty Wt. Water Content
RRG067E 241 182 2
RRG100E 292 230 3
RRG134E 341 279 4
RRG167E 390 328 5
RRG201E 449 378 6
RRG234E 502 431 7
RRG268E 548 476 8
** Additional height
required to
maintain 6”
clearance from all
vent connector
components.
Vent damper
may be installed
in vertical or
horizontal section
of vent connector
within reach of
vent damper
harness.
* Minimum radial
clearance around draft
hood and vent connector.