Use and Care Manual

OverDryve
™
Pro User Manual 9
2. Getting Started
Connect to Your Truck Stereo
To listen to audio through your truck stereo, the tablet must be in truck
mode. To put the tablet in truck mode, place it on the Smart Mount and
plug the mount into a power source using the vehicle charger.
The optimal way to connect to your truck stereo is with the provided AUX
cord. You can also connect wirelessly via OverDryve’s FM transmitter.
To connect with the AUX cable:
1. Tap Connect via AUX.
2. Plug the right-angle end of the AUX cable into the OverDryve
™
Smart
Mount.
Note: Do not plug the AUX cable into the audio out port on
OverDryve
™
.
3. Plug the other end into your truck’s AUX jack.
4. Set your truck’s audio source to AUX.
To use the FM transmitter:
1. Attach the FM antenna to the Smart Mount.
2. Unplug the AUX cable if it is plugged in.
3. Tap the settings icon located in the top right corner of the OverDryve
™
screen.
4. Tap OverDryve
™
Setup > Audio > Connect via radio.